TARGET 3001! Adjustments and modifications (Logfile) 2024-10-28: 33.2.0.9: TARGET 3001! V32 stands still, the current version is now V33 2024-10-28: 33.2.0.9: iBOM: The rotation of the components on top/bottom was not always correct 2024-10-28: 33.2.0.9: Signal polygons (ground planes) have always pushed themselves into the foreground during selection with M1 2024-10-26: 33.2.0.9: DRC: The number of non-plated-through drill holes is displayed in the summary (if available) 2024-10-24: 33.2.0.9: Routing several tracks simultaneously with the Guided Bus Router (Preview V33) 2024-10-24: 33.2.0.9: For all autorouters: Route layers are checked for route capability beforehand (copper) 2024-10-21: 33.2.0.9: Settings / Options: Added DRC values to the topic "Project" 2024-10-18: 33.2.0.9: "Component names and values to the handle..." places the name above and the value below the component center 2024-10-18: 33.2.0.9: Fixed a sporadic problem when using the Element Inspector 2024-10-12: 33.2.0.9: Preview messages can be disabled in the new "Settings" dialog completely 2024-09-26: 33.2.0.9: "Marching Ants" also when switching from schematic to PCB with Cross-Probe (Preview V33) 2024-09-26: 33.2.0.9: ODB++ output: Double or even multiple congruent outlines caused the output to get out of step 2024-09-24: 33.2.0.9: Bill of materials: The component property "BILL_OF_MATERIAL=TRUE" only overwrites "Components without package" 2024-09-20: 33.2.0.9: "Dimension radius/diameter" in the menu of the small black boxes of an arc/torus (Preview V33) 2024-09-19: 33.2.0.9: Better finding: After searching and highlighting, the found elements are framed with "marching ants" (Preview V33) 2024-09-16: 33.2.0.9: Improved the PDF output via script 2024-09-13: 33.2.0.9: Hold [Shift] or [Ctrl] for exact angles during mouse movement (45° grid, also for signal polygons, Preview V33) 2024-09-11: 33.2.0.9: 3D view: The color of the PCB and of the silkscreen can be set in the context menu (M2) 2024-09-09: 33.2.0.9: Pick&Place: The board dimensions are output when outputting in text format, width, height, thickness 2024-09-09: 33.2.0.9: Variants: When deriving components from an example component, the marked components are preselected 2024-09-09: 33.2.0.9: Drill output with XGerber: Improvement, IF NPT drills are not output into an extra file (Non-Plated-Through) 2024-09-05: 33.2.0.9: Pick&Place as Excel: Component selection did not work correctly 2024-09-02: 33.2.0.9: Output of a list of points for an automatic adhesive dispenser as CSV or Excel file (Preview V33) 2024-08-29: 33.2.0.9: Color of air wires for new projects with dark background RGB $41FF41 and with light background RGB $008000 2024-08-28: 33.2.0.9: Pick&Place: Referencepoint of a package can also be pad 1 2024-08-28: 33.2.0.9: Improved pin overlapping in the schematic during symbol creation 2024-08-24: 33.2.0.9: Interactive Bill-of-Materials iBOM: Grouping of identical components improved 2024-08-19: 33.2.0.9: QR codes are also generated correctly when the PCB is viewed from the rear. Subsequent rotating remains prohibited 2024-08-15: 33.2.0.9: ToolTip also shows the layer of the elements in PCB view 2024-08-15: 33.2.0.9: Clearer message if STEP models are missing when loading a project 2024-08-13: 33.2.0.9: Corrected the size of the drill hole pictograms in the new settings dialog 2024-08-07: 33.2.0.9: Improved the position of dialogs and toast messages if more than one monitor is used 2024-08-07: 33.2.0.9: ODB++: Slices and 360° circles (tori) in the drilling layer are also output as drill holes 2024-08-05: 33.2.0.9: ODB++: SMD pads with an own drill hole were not always output as drill hole 2024-08-05: 33.2.0.9: PCB outline wizard: For round holes, the diameter is now specified instead of the radius 2024-08-02: 33.2.0.9: ASCII IO import/export can cope with oblong holes in pads and with "No aura for layers" 2024-07-25: 33.2.0.9: Block diagram repaired: All terminals had the pin number 1. Reo fixes this for old projects 2024-07-22: 33.2.0.9: ODB++: Pins with pin number 0 are not output to the component layers 2024-07-22: 33.2.0.9: ODB++ output, saving the project file and outputting ODB++ again could sometimes cause problems 2024-07-22: 33.2.0.9: ODB++: The subnet information was sometimes missing in the file ".\steps\pcb\eda\data" 2024-07-15: 33.2.0.9: The colors of the grid $808080 (dark gray) and $E0E0E0 (light gray) were sometimes reset to [Standard] 2024-07-15: 33.2.0.9: XGerber import: Select several XGerber files and a drill file at once or a ZIP with such files (Preview V33) 2024-07-13: 33.2.0.9: XGerber import: "%" in a comment "G04" could disrupt the parser 2024-07-11: 33.2.0.9: "Angle dimensioning" in menu "Aktions" (Preview V33) 2024-07-05: 33.2.0.9: For Z3001 files, no Z3001OPEN file is generated any longer 2024-06-26: 33.2.0.9: Perfboard area: Vias are set to "always free of solder resist", regardless of the Gerber settings 2024-06-18: 33.2.0.9: ODB++: Solved problems with oblong drill holes in solder pads 2024-06-13: 33.2.0.9: PDF export: Several variants are output one after the other into one PDF (alternatively use a script) 2024-06-12: 33.2.0.9: Pick&Place: Excel output did not export all user fields and "Manufacturer" was ignored 2024-06-05: 33.2.0.9: New menu point "Rename property..." in menu "Actions" 2024-06-05: 33.2.0.9: GDI+: Polygonal pads were shown ony als one line, if height or width were set to zero 2024-05-29: 33.2.0.9: Panelisation of rectangular PCBs: Also scoring panels with or without a border can be created (Preview V33) 2024-05-27: 33.2.0.9: If STEP models are suddenly missing when loading a project, an attempt is made to reload them from the database 2024-05-22: 33.2.0.9: Assembly files BOM and CPL regard component properties REEL_ORIENTATION, REEL_OFFSET_X and _Y 2024-05-16: 33.2.0.9: DXF export: Tori (arcs) with width=0 are also exported 2024-05-13: 33.2.0.9: Creating a front panel with height more than 1 m could cause problems 2024-05-13: 33.2.0.9: XGerber output: Assembly files BOM and CPL are also exported e.g. for JLCPCB (Preview V33) 2024-05-07: 33.2.0.9: Pick&Place: Coordinates extended to 3 decimal places 2024-04-29: 33.2.0.9: Interactive Bill-Of-Materials iBOM: Pads did not always show the correct rotation 2024-04-29: 33.2.0.9: Eagle import *.SCH: Additional texts (attibutes) were not correctly mounted into the data structure 2024-04-26: 33.2.0.9: Fine-tuning tracks with [7]: Not all minimum distances of the signals were regarded 2024-04-23: 33.2.0.9: ODB++: The position of packages with "Locked against movement" was sometimes wrong 2024-04-23: 33.2.0.9: ODB++: QR codes in rectangles were not output correctly 2024-04-23: 33.2.0.9: ODB++ via commandline call with "-o": Sometimes "align right" for texts was ignored 2024-04-18: 33.2.0.9: Import Eagle libraries: SMD pads sometimes were not assigned to the correct layer 2024-04-18: 33.2.0.9: Component browser: Very big rectangles and triangles are not shown opaque in the component preview 2024-04-17: 33.2.0.9: ODB++: Empty texts without content sometimes caused an error message 2024-04-15: 33.2.0.9: Printing inverted: Elements with non-standard colors sometimes were not inverted 2024-04-10: 33.2.0.9: NC editions: NC warning now only appears in the solder stop mask when creating Gerber files 2024-03-29: 33.2.0.9: SMD pad with drill hole: At least the drill hole is left blank in foreign signal polygons on all layers 2024-03-27: 33.2.0.9: ODB++: Old ground planes from before V18 were not always output 2024-03-27: 33.2.0.9: ODB++: Sometimes "align right" for texts was ignored 2024-03-12: 33.2.0.9: Interactive meandering: Length information at the cursor was not always calculated correctly 2024-03-11: 33.2.0.9: ODB++: Component names and values top/bottom on extra layers are also output in the silkscreen 2024-03-07: 33.2.0.9: Signal polygons: "Adjust auras" only affects pads whose center is not inside another polygon with a higher rank 2024-03-06: 33.2.0.9: BOM script: Added commands SMD, THT and NoPackage 2024-03-06: 33.2.0.9: Defective components in the database could sometimes not be selected and deleted 2024-03-06: 33.2.0.9: Export and import modules: The IDs of the components are included 2024-03-05: 33.2.0.9: In the Panel Pool Calculator, an error message occurred under very special circumstances 2024-02-29: 33.2.0.9: Color dialog: Added the Hex RGB entry to the exisiting BGR entry 2024-02-24: 33.2.0.9: Selecting signal sequences with M1 and [Shift] + M1: Problems occurred with extremely complex signals 2024-02-23: 33.2.0.9: UltraLibrarian sometimes creates corrupt CXF files. The CXF import is now more tolerant 2024-02-22: 33.2.0.9: More information is displayed if pasting from the clipboard fails 2024-02-21: 33.2.0.9: ODB++ output no longer lists identical components top and bottom separately (*_TOP and *_BOT) 2024-02-16: 33.2.0.9: After opening a project, TARGET sometimes lost the keyboard focus 2024-02-05: 33.2.0.9: PCB Panelization: Elements that were locked against movement were not taken along 2024-02-02: 33.2.0.9: Added component properties explorer: Edit all component properties in a clearly arranged table (Preview V33) 2024-01-31: 33.2.0.9: After importing components from the component browser, TARGET sometimes lost the keyboard focus 2024-01-29: 33.2.0.9: Front panel: Added countersink drill M4.5 2024-01-29: 33.2.0.9: Component directly from COMPONIVERSE: Error fixed if property "USED_PACKAGE_ID" was set 2024-01-23: 33.2.0.9: Interaktive Bill-of-Materials "iBOM" as an HTML file; see menu "File / Input-Output / Production" (Preview V33) 2024-01-17: 33.2.0.9: Track fine tuning with key [7] sometimes ignored the minimum distance of the signal 2024-01-16: 33.2.0.9: Improved ODB++ output for inner cutouts in the PCB area 2024-01-11: 33.2.0.9: Auto scroll / Auto pan at the edge of the working window also works for busses and bridges 2024-01-10: 33.2.0.9: Bill of materials: The property "Is SMD" is evaluated better 2024-01-09: 33.2.0.9: Front panel: Added threads M2, M8 and M10 2024-01-03: 33.2.0.9: Bill of materials: The project variables "Job" and "Title" are output in the header, if available 2024-01-03: 33.2.0.9: "Inverted" overlines for pin names in GDI view raised slightly 2023-12-28: 33.2.0.9: Eagle import: The reference layers in the layer dialog were sometimes assigned incorrectly 2023-12-22: 33.2.0.9: Big layers dialog: Using the buttons for multilayer PCBs sometimes set all colors to black 2023-12-22: 33.2.0.9: When moving a pin name in the schematic, a line is drawn towards the respective pin 2023-12-05: 33.2.0.9: "Miter corner" and similar functions of the small black boxes: The color is inherited too 2023-11-11: 33.2.0.9: Coordinates beyond +/- 1 meter: "Shift PCB into the center" did not work correctly 2023-10-25: 33.2.0.9: Update or replace a component: If the package is not replaced too, USED_PACKAGE and USED_PACKAGE_ID will remain 2023-10-20: 33.2.0.9: Front panels: Faces in the engraving layer (triangles, rectangles and slices) are combined and outlined 2023-10-18: 33.2.0.9: Loading and saving the new RGB colors in the layer dialog did not work always 2023-10-18: 33.2.0.9: PDF output sometimes had small prongs on ground planes that could cause short circuits 2023-10-17: 33.2.0.9: In the back view of the board, the colors of the layers were not always taken along correctly 2023-10-16: 33.2.0.9: When starting a front panel, all additionally created layers had the color dark-cyan 2023-10-12: 33.2.0.9: The CALAY netlist format no longer has a length restriction for the signal names 2023-10-10: 33.2.0.9: An oblong drill hole was output in STEP by mistake only if it was more than twice as long as its width 2023-10-10: 33.2.0.9: Somtimes the buttons vanished in the dialogs or in the sidebar 2023-10-09: 33.2.0.9: "Prepare assembly" can ignore the component type when summarizing identical components 2023-10-06: 33.2.0.9: Importing REF symbols sometimes pushed the TARGET window into the background 2023-10-06: 33.2.0.9: Component names and values from UltraLibrarian sometimes have a width of almost zero: Now automatically corrected 2023-10-02: 33.2.0.9: The layers in the PCB can now have any RGB color, not only the 16 basic colors as before 2023-09-25: 33.2.0.9: Deactivate layer: Even if the layer is toggled visible, elements on it cannot be selected 2023-09-25: 33.2.0.9: Unfilled signal polygons (pround planes) always represent a connection for the computation of the airwires 2023-09-25: 33.2.0.9: FreeRouting import had problems with inner copper layers 2023-09-24: 33.2.0.9: CXF import: The solder stop mask is set to "Standard" for pads with drill hole (because of UltraLibrarian) 2023-09-23: 33.2.0.9: The new Settings dialog sometimes set colors unintendedly to gray 2023-09-22: 33.2.0.9: 3D view: Free elements in the silk screen were partwise covered by copper tracks 2023-09-13: 33.2.0.9: When continuing a track in the PCB, the existing track color - if any - is also taken over 2023-09-12: 33.2.0.9: Project Reo: With "PCB without Schematic" ghosting schematic symbols are extinguished 2023-09-11: 33.2.0.9: Pick&Place in Excel format: Variants were not displayed 2023-09-11: 33.2.0.9: Images can now be saved up to 2032 dpi resolution (doubled) 2023-09-11: 33.2.0.9: Menu point "Help / About TARGET 3001!..." was defective 2023-09-11: 33.2.0.9: ODB++: Improved the order of layers in the matrix 2023-09-11: 33.2.0.9: Search and select: Fixed problem caused by upper and lower case entry 2023-09-06: 33.2.0.9: During CXF import and also during import of modules sometimes the paste reduction for SMD pads was deleted 2023-08-31: 33.2.0.9: Alignment Assistant: For packages on the backside, the propertay "Flipped" was not set (3D view was wrong) 2023-08-31: 33.2.0.9: Some dialogs were not directly active, when called up 2023-08-30: 33.2.0.9: Mode Inspector active on top right when laying tracks 2023-08-30: 33.2.0.9: Improved decision making for heat trap ligaments 2023-08-28: 33.2.0.9: Eagle import: Unused inner copper layers are omitted 2023-08-22: 33.2.0.9: Find and select with [f] can also always automatically propose the next element (new Checkbox) 2023-08-15: 33.2.0.9: After a reorganization of component numbers there is a success message 2023-08-14: 33.2.0.9: TARGET remembers the last non-maximized window size even if TARGET is quit maximized 2023-08-14: 33.2.0.9: Added menu item "Rotate components around their handle cross" in menu "Edit" 2023-08-13: 33.2.0.9: Improved ODB++: Output of MPNs and position of back-mounted components 2023-08-11: 33.2.0.9: Added "Prepare assembly" in PCB view in menu "Actions / Preparatory work" 2023-08-08: 33.2.0.9: Signal polygons did not count as a connection if minimum drill hole and minimum rest ring were zero in the DRC 2023-08-08: 33.2.0.9: Masseflächen wurden nicht als Verbindung gezählt, wenn Mindest-Bohrloch und Mindest-Restring beim Prüfen null waren 2023-08-07: 33.2.0.9: New entry in menu "File" for Eagle, Altium and Protel files 2023-08-07: 33.2.0.9: Setting future items with the [o] key for options did not work correctly in V32 2023-08-07: 33.2.0.9: Fill signal polygon: Only auras and deletions in the polygon area are foreseen to be subtracted 2023-08-07: 33.2.0.9: ODB++: added misc.info 2023-07-31: 33.2.0.9: Pad numbers were shown as boxes only, if the minimum width in the settings was too big 2023-07-31: 33.2.0.9: If the points of a polygon were edited, the small black boxes were also displayed in other windows 2023-07-24: 33.2.0.9: TARGET 3001! V31 stands still, the current version is now V32 2023-07-24: 33.2.0.9: Opening the old settings dialog: If the weekly backup was set, always an annoying message appeared 2023-07-22: 33.2.0.9: When importing a COMPONIVERSE component in the browser sometimes "Component cannot be loaded." showed up 2023-07-19: 33.2.0.9: Import a COMPONIVERSE component with component browser threw an error, if list of existing components was empty 2023-07-14: 33.2.0.9: When placing traces in the schematic or in the PCB the end of a trace sometimes jumped far away 2023-07-14: 33.2.0.9: XGerber import: Concatenation of pads and drills, further optimization (Preview V32) 2023-07-11: 33.2.0.9: Turn angle dialog with key [Shift] + [T]: Added button [negative], to reverse rotation direction 2023-07-11: 33.2.0.9: Component properties: Changing property "MANUFACTURER" changed the property itself instead of it´s value 2023-07-10: 33.2.0.9: Component browser maximum as high as the screen (necessary for screens with less than 800 pixels height) 2023-07-10: 33.2.0.9: New comprehensive settings dialog in the "Settings" menu (Preview V32) 2023-07-09: 33.2.0.9: Find and highlight: A found component is no longer zoomed in so much 2023-07-05: 33.2.0.9: MySQL: Closed a memory leak (OutOfMemory) 2023-07-03: 33.2.0.9: Element Inspector moved with GDI+ graphics when window was scrolled 2023-06-29: 33.2.0.9: Messageboxes sometimes vanished behind the program 2023-06-28: 33.2.0.9: Added the Element Inspector (Preview V32) 2023-06-28: 33.2.0.9: Saving in Eagle format: Empty layers with user function are nevertheless output as layers 2023-06-25: 33.2.0.9: Inner MDI windows for schematic and PCB are no longer in Windows aero look 2023-06-21: 33.2.0.9: When routing traces in the schematic or in the PCB, the end of a trace sometimes jumped far away 2023-06-21: 33.2.0.9: Accelerated determination of snap points for key [+] (snap coordinates) 2023-06-13: 33.2.0.9: Top right notification for messages and new versions 2023-06-10: 33.2.0.9: "Locked against moving" also works against dragging of ends and corners 2023-06-09: 33.2.0.9: Front panel: Added countersink drill M3.5 2023-06-09: 33.2.0.9: DRC: Warning for rectangles with a photo in the area or copper layers 2023-06-09: 33.2.0.9: Added output ODB++ (Preview V32) 2023-06-07: 33.2.0.9: No automatic start of the AutoPlacer when opeing a project with Dual Screen 2023-06-01: 33.2.0.9: DRC: The value zero as minimum spacing between individual signals is rejected 2023-05-22: 33.2.0.9: XGerber Zip was sometimes empty with very long file paths and poor transfer rates 2023-05-02: 33.2.0.9: MySQL database did not correctly display properties of type "Integer" during parametric search 2023-04-13: 33.2.0.9: New menu point "Front panel / Convert breakout to flat milling...": For any polygons on "Contours" layer 2023-04-05: 33.2.0.9: Properties dialog: Key [Tab] leads into the next field of the table 2023-04-05: 33.2.0.9: Package dialog, button [Exchange package]: The package properties are also reloaded in the process 2023-04-04: 33.2.0.9: Reload and replace packages: The package properties can also be reloaded in the process 2023-04-03: 33.2.0.9: During the EAGLE import the layers "tDocu" and "bDocu" are now translated to the TARGET layer "Dimensioning" 2023-04-03: 33.2.0.9: For UltraLibrarian CXFs, the layer of pads with drill holes is corrected to layer 100 2023-04-01: 33.2.0.9: Added button [Properties] when editing single lines or arcs (torus) 2023-03-31: 33.2.0.9: ZIP files with empty subdirectories could cause problems when unpacking (UltraLibrarian etc.) 2023-03-23: 33.2.0.9: Incorrect counting of breadboard solder pads could throw the edition "discover" out of step 2023-03-20: 33.2.0.9: DRC: "SMD pad with drill hole" also responds to foreign drill holes in the SMD pad (e.g. vias within the pad) 2023-03-17: 33.2.0.9: First version of the Protel/Altium ASCII import *.SchDoc in the schematic menu "Actions" (Preview V32) 2023-03-17: 33.2.0.9: Polygonal breadboard area also works with arcs and splines in the PCB outline 2023-03-15: 33.2.0.9: The package property "IS_SMD" replaces the SMD component check also during manual placement and auto placing 2023-03-12: 33.2.0.9: Replaced the Windows message box everywhere 2023-03-12: 33.2.0.9: Insert selected components present in the schematic into the PCB: Added button [Always] 2023-03-07: 33.2.0.9: Move components in the schematic: Dragged signals also keep color and line style 2023-02-27: 33.2.0.9: The color of the signal names in the schematic also depends on the schematic background color (b/w) 2023-02-26: 33.2.0.9: Autorouter "FreeRouting": Improved regarding of minimal spacings 2023-02-24: 33.2.0.9: MID: Improved output files for 3D Pick&Place and for the solder paste dispenser 2023-02-24: 33.2.0.9: First version of the Protel/Altium ASCII import *.PcbDoc in the PCB menu "Actions" (Preview V32) 2023-02-23: 33.2.0.9: The new QR codes were incorrectly output in Gerber in all layers 2023-02-21: 33.2.0.9: Rename signal: The signal names in star shaped ground are renamed accordingly 2023-02-21: 33.2.0.9: Improved display of signal classes: Menu "Settings / Project signals / / Properties" 2023-02-21: 33.2.0.9: Command line parameter -j creates BOM (+Pick&Place) as JSON file: TarV31.exe -j 2023-02-20: 33.2.0.9: Generate and insert QR code in menu "Actions" (Preview V32) 2023-02-06: 33.2.0.9: Components direct from COMPONIVERSE: Solved problems with DIN _and_ IEEE at the same time 2023-02-05: 33.2.0.9: Added hint for checkboxes wit three states 2023-02-02: 33.2.0.9: Settings (INI): Dot not always start with the bend mode "point-to-point (P2P) router" in schematic view 2023-01-26: 33.2.0.9: Pick&Place list for assembly can be output as Excel file (Preview V32) 2023-01-26: 33.2.0.9: Generated Excel files can also be opened by LibreOffice / OpenOffice (Windows 10+) 2023-01-26: 33.2.0.9: Package assistant: Added "copy / paste line" 2023-01-10: 33.2.0.9: Integrated COMPONIVERSE directly into the component browser 2022-12-29: 33.2.0.9: Package generator: Programmed the new package type "DFN Dual Flatpack, No Leads" 2022-12-27: 33.2.0.9: Added point "Lock module against moving" in menu "Modules" (Preview V32) 2022-12-19: 33.2.0.9: Routing tracks with a via at the tip [.]: Clicking point is taken more accurately 2022-12-15: 33.2.0.9: Context menu: Cross Highlight, show and zoom component or signal in the other window (schematic <=> PCB) Preview V32 2022-12-14: 33.2.0.9: Saving in Eagle format: improved transfer of vias and mounting holes 2022-12-10: 33.2.0.9: DRC: Spacing errors could be reported for solder pads that are firmly connected together inside the package 2022-12-08: 33.2.0.9: COMPONIVERSE: Components were not found, if a "/" was in the search string 2022-12-03: 33.2.0.9: Isolation milling: Added the spindle rotation speed S to the G-Code M03 2022-12-01: 33.2.0.9: Selection assistant: Added "Locked against moving" 2022-11-28: 33.2.0.9: Installation: Improved import of template projects from a possibly existing old version 2022-11-25: 33.2.0.9: At the bottom of the context menu with M2: Show the selected component or package directly in the component database 2022-11-25: 33.2.0.9: When selecting lines and polylines, the total length is displayed in the status bar 2022-11-24: 33.2.0.9: Bill of materials (BoM): Variants can be selected in the list and can thus be compared 2022-11-23: 33.2.0.9: Deleting: Query if also elements are selected that are locked against moving 2022-11-21: 33.2.0.9: Import from the clipboard in the PCB: Only necessary layers are additionally switched visible 2022-11-17: 33.2.0.9: Improved "Push onto the grid" 2022-11-16: 33.2.0.9: A problem occurred in V31.6.0.66 when using MySQL 2022-11-14: 33.2.0.9: DRC: Checking hostile copper against drill holes without a copper ring (also for padstacks with unused inner layers) 2022-11-11: 33.2.0.9: Eagle import: Improvement for the pin numbers 2022-11-11: 33.2.0.9: Eagle export: Although there are no component technologies in TARGET, each component needs one in Eagle 2022-11-11: 33.2.0.9: "LoadAllProperties" is now executed only once per day, which significantly speeds up program startup 2022-11-10: 33.2.0.9: DRC: "Quick DRC" is always used 2022-11-10: 33.2.0.9: STEP export: Lines and arcs in a copper layer are output even if they do not belong to a signal 2022-11-10: 33.2.0.9: Eagle export: Equal symbols but with changed pin names were summarized despite that 2022-11-07: 33.2.0.9: Padstacks can be defined as "completely drilled through" even if not both outer copper layers are used 2022-10-31: 33.2.0.9: XGerber output: Improved solder paste reduction for rectangular pads with rounded corners 2022-10-28: 33.2.0.9: DRC: Spacing addition in padstacks better taken into account for inner layers without copper 2022-10-24: 33.2.0.9: DRC: Single elements in the copper can be excluded from the spacing checks (Preview V32) 2022-10-19: 33.2.0.9: Polygonal breadboard area: The auras of "hostile" elements are taken into account as spacing if desired 2022-10-18: 33.2.0.9: The buttons for the layer sets forgot to update the working layers above in the sidebar and on top in the toolbar 2022-10-18: 33.2.0.9: Back view: The working layers (copper and painting) were not "mirrored" accordingly 2022-10-18: 33.2.0.9: Back view: The buttons for the layer sets in the sidebar were not "mirrored" internally 2022-10-18: 33.2.0.9: Back view: Elements locked against moving did not follow 2022-10-18: 33.2.0.9: Back view: The red panel on the top right was sometimes not on the current PCB window 2022-10-18: 33.2.0.9: By typing [s] like select and directly typing [d] for displace the selected element could be moved off the grid 2022-09-29: 33.2.0.9: Bitmaps in rectangles with negative width could cause an error during project loading 2022-09-22: 33.2.0.9: Close front panel toolbar - also remains closed the next time (see also menu "View / Toolbars") 2022-09-22: 33.2.0.9: Reference symbol with signal name selection: With [OK] the name is taken from the list (upper/lower case!) 2022-09-11: 33.2.0.9: Dual screen: Improved workflow, if an additional window is opened as a component editor 2022-09-08: 33.2.0.9: STEP export: The color of the PCB and the tracks can be changed 2022-08-31: 33.2.0.9: Opening the component browser and immediately typing [Return] uses the selected component directly 2022-08-31: 33.2.0.9: "Locked against moving" for elements in the PCB that do not belong to a package 2022-08-30: 33.2.0.9: DXF output ignored the solder paste reduction and rounding for rectangular pads 2022-08-25: 33.2.0.9: Color of the pad numbers is not adjusted when loading a project (no more complementary color to the background) 2022-08-25: 33.2.0.9: Added menu point "Actions / Logo as component..." 2022-08-19: 33.2.0.9: Merging signals sometimes did not take all signal polygons along (also when renaming signals) 2022-08-17: 33.2.0.9: DXF import: Resolution can be increased when converting arcs to chords 2022-08-16: 33.2.0.9: STEP export reports if a package with an embedded STEP model is faulty 2022-08-07: 33.2.0.9: Bitmaps in rectangles limited to max. 1016 dpi (40 pixels per mm) 2022-08-06: 33.2.0.9: Added two menu points "Settings / Project signals / / Pins" and "... / Pads" 2022-08-06: 33.2.0.9: Improved display in the menu if toolbars are visible 2022-08-06: 33.2.0.9: Switching units in dialogs failed with unit inch " 2022-07-30: 33.2.0.9: Simulation: Subcircuit generator ignored symbols that were placed on another schematic page before 2022-07-17: 33.2.0.9: Isolation milling: Mirror axis selectable, if only copper bottom is output and without fidicial drills 2022-07-12: 33.2.0.9: The BOM outputs the first distributor found if no primary distributor is set 2022-07-12: 33.2.0.9: The primary distributor can also be set in the component database (preferred order number) 2022-07-05: 33.2.0.9: Component browser: List of most recently used components has now 50 entries (instead of 20) 2022-07-05: 33.2.0.9: Autorouter "FreeRouting" from Alfons Wirtz et al. now usable 2022-06-28: 33.2.0.9: Layer dailog: Buttons for 8 and 10 layers have not set the layers above number 34 2022-06-27: 33.2.0.9: Eagle export: Improved output of rotation and mirroring of sysmols in the schematic 2022-06-26: 33.2.0.9: Dialog for open rectangles can toggle units too (mil - mm) 2022-06-21: 33.2.0.9: Improved reorganisation for mixed uppercase and lowercase prefixes (Rx1, Rx2, Rx5) 2022-06-17: 33.2.0.9: Introduced text funktion "Maximum page number" 2022-06-14: 33.2.0.9: Improved DXF import of ellipses 2022-06-06: 33.2.0.9: Layout: Change bend mode with key [ ] (spacebar) changes from "autorouter" to "orthogonal first" 2022-06-06: 33.2.0.9: Schematic: Change bend mode with key [ ] (spacebar) changes from "autorouter" to "vertical first" 2022-06-06: 33.2.0.9: LayerSet buttons in sidebar now also save active copper working layer and active drawing layer 2022-06-06: 33.2.0.9: [,] changes also the active copper working layer 2022-06-02: 33.2.0.9: Reduction of solder paste for SMDs up to 50% possible instead of up to 25%. 2022-06-02: 33.2.0.9: In the Settings and Options dialog, nonsense could be entered as unit 2022-06-01: 33.2.0.9: 3D view of the PCB: traces could protrude into a pad with a drilled hole 2022-06-01: 33.2.0.9: Properties dialog warns about duplicate properties 2022-05-26: 33.2.0.9: Placement of components: Total length of the airwires and number of intersections is displayed in the status bar 2022-05-19: 33.2.0.9: Eagle export: Names of DeviceSets are only incremented, if symbols or packages are not identical 2022-05-19: 33.2.0.9: Pick&Place: Rotation of packages with REEL_ORIENTATION is normalized to 0...<360° 2022-05-17: 33.2.0.9: Print script: Instead of the variant's name, also the variant's number can be entered with "Variant=" 2022-05-15: 33.2.0.9: Dual screen: Main menu on top comes along onto the active screen 2022-04-27: 33.2.0.9: Eagle export: Package names are incremented only if the property PACKAGE_RIPPED_UP=TRUE 2022-04-26: 33.2.0.9: Releasing the mouse wheel after M3H outside the window sometimes blocked the mouse. [ESC] helps 2022-04-25: 33.2.0.9: Moving the sheet with M3H or with [Ctrl] + M2H jittered at times 2022-04-25: 33.2.0.9: Moving the sheet with M3H or with [Ctrl] + M2H can always be canceled with [ESC] 2022-04-25: 33.2.0.9: Opening projects in a read-only folder failed 2022-04-25: 33.2.0.9: DRC: Avoid the error message "Pin missing" with "PCB without schematic" 2022-04-25: 33.2.0.9: Menu "Modules / Select a module..." sometimes caused an error message 2022-04-25: 33.2.0.9: Added menu item "Window / Screens info..." 2022-04-24: 33.2.0.9: Improved the reaction to mouse wheel movements in the 3D view 2022-04-22: 33.2.0.9: Error markers: Tooltips show error information 2022-04-22: 33.2.0.9: Arrow-shaped error markers are better selectable 2022-04-22: 33.2.0.9: Menu item to remove all error markers 2022-04-22: 33.2.0.9: Signal polygon: Improved the appearance of the ground planes around drill holes 2022-04-15: 33.2.0.9: Printing and PDF export: Signal names are output too, if set 2022-04-15: 33.2.0.9: Improved zooming, if the window is not the active window (e.g. with Dual Screen) 2022-04-14: 33.2.0.9: Comments as multiline text unintentionally became normal text when changed 2022-04-11: 33.2.0.9: Realtime DRC generates no error markers against ground planes (signal polygons) 2022-04-11: 33.2.0.9: DRC: Error markers can also be arrows 2022-04-07: 33.2.0.9: Modules export: Signal polygons can be contained in modules 2022-04-07: 33.2.0.9: Edition "discover" did not start without an internet connection 2022-04-07: 33.2.0.9: When creating tooltips for dialog buttons (hints), an error could occur under certain circumstances 2022-04-06: 33.2.0.9: Isolation milling: The fiducial drills can also be inside the PCB if the distance is negative 2022-04-03: 33.2.0.9: Menu "Settings" / "Project components" and "Project signals": Very long lists are partitioned 2022-03-30: 33.2.0.9: Toggling mm/mil in the dialogs was setting the checkmarks in front of the properties like real value changes do 2022-03-29: 33.2.0.9: MID: Packages mounted on the Backside in 2D PCB view were shown 180° rotated on the MID body 2022-03-29: 33.2.0.9: MID: A click onto the MID body could sometimes cause an access violation 2022-03-23: 33.2.0.9: STEP Output: Faded out components with embedded STEP model were visible in the lower left corner 2022-03-23: 33.2.0.9: Fill closed polylines in the PCB: Menu "Actions / Special Functions" 2022-03-23: 33.2.0.9: Improved calculation of airwires when a signal was subsequently assigned to a painting polygon 2022-03-18: 33.2.0.9: Convert PCB with schematic into PCB without schematic: For some pads the signal association disappeared 2022-03-07: 33.2.0.9: Improved Eagle import: and sometimes caused problems 2022-03-04: 33.2.0.9: DRC: Orphan packages with pads with pin number but without symbol in the schematic are mentioned: "Pin missing!" 2022-03-03: 33.2.0.9: Panelization: When changing the name ABC.T3001 to ABC_Panel.T3001, ABC.T3001 was not logged out correctly (OPEN) 2022-03-02: 33.2.0.9: Panelization: Zero breaking points horizontally or vertically caused an error message 2022-02-27: 33.2.0.9: LicenseCounterFile can also be 'https://server.ibfriedrich.com/licenseCheck/licenseCounter.php' 2022-02-25: 33.2.0.9: Component database: Output of a meaningful message if deletion can not be executed 2022-02-16: 33.2.0.9: Change component number: If the desired number is already occupied, the affected components can move up as well 2022-02-16: 33.2.0.9: OpenGL: Padstacks with large negative addition for several layers were displayed incorrectly 2022-02-15: 33.2.0.9: Improved the use of template files when creating user packages 2022-02-04: 33.2.0.9: Button [Show error list again] sometimes stayed left top even if the project was already closed 2022-01-31: 33.2.0.9: TIFF export with free format: Height and width may have been mixed up 2022-01-28: 33.2.0.9: Eagle import: Implemented the tags , and 2022-01-06: 33.2.0.9: Menu "Modules": Show modul, add elements, remove elements 2022-01-05: 33.2.0.9: Electra DO-File: "select all nets + unprotect selected" replaced by "unprotect all wires" 2022-01-05: 33.2.0.9: Electra DO-File: "select all nets + unselect net " replaced by "lock net " 2022-01-05: 33.2.0.9: Electra DO-File: "cost layer Cx forbidden" replaced by "unselect layer Cx" 2022-01-03: 33.2.0.9: Layer-Dialog: Buttons for 8-fold and 10-fold multilayer 2022-01-02: 33.2.0.9: Printing and PDF: Light background colors were not output despite the check mark 2022-01-02: 33.2.0.9: Back view: Components that are locked against moving did not flip along 2022-01-02: 33.2.0.9: Command line parameter -pp for Pick&Place list 2021-12-30: 33.2.0.9: Modules: Special colors of elements are saved in CXF and MXF files 2021-12-23: 33.2.0.9: Projects saved in back view had problems with some layer functions 2021-12-22: 33.2.0.9: Back view is undone first before saving and before all possible output functions 2021-12-22: 33.2.0.9: Reo assigns duplicate component names a new number 2021-12-22: 33.2.0.9: Import MXF modul: Counting of the component names/numbers sometimes got mixed up 2021-12-16: 33.2.0.9: Back view: Improved handling of signal polygons 2021-12-14: 33.2.0.9: Menu "Settings": limited menus for project components, signals and free elements 2021-12-06: 33.2.0.9: Front panel: A panel in the layout of the price calculator was displaced 2021-12-04: 33.2.0.9: Multiline texts can also have the text function "Comment" 2021-12-04: 33.2.0.9: Texts in PDF output: Avoided wide gaps between words 2021-12-03: 33.2.0.9: Improved handling of right-aligned multiline text 2021-12-02: 33.2.0.9: Improved multiline text regarding the handling of projects from older versions 2021-12-02: 33.2.0.9: Import MXF: For texts with a user-defined text function the token "PROPERTY" was not recognized 2021-12-02: 33.2.0.9: Export MXF: With multi-layer PCB the inner copper layers were not always denoted correctly 2021-12-02: 33.2.0.9: Alignment assistant sometimes placed the 3D package onto the wrong PCB side for components from CXF imports 2021-11-29: 33.2.0.9: Back view: Improvement with many copper layers and take-along of the active working layers (copper and drawing) 2021-11-23: 33.2.0.9: TARGET 3001! V30 stands still, the current version is now V31 2021-11-21: 33.2.0.9: Signal polygons: "Un-fill all polygons" with shortcut key [-] 2021-11-20: 33.2.0.9: Modules can be saved and loaded as MXF (Module eXchange Format) for design reuse (preview V31) 2021-11-17: 33.2.0.9: "Modules" in top main menu 2021-11-16: 33.2.0.9: Background color in the 3D view can be set using the context menu 2021-10-24: 33.2.0.9: After placing a via, one of the 4 most recently used layers can be chosen using key [,] (type several times) 2021-10-21: 33.2.0.9: Removed query for info on MCADs after STEP output 2021-10-21: 33.2.0.9: If there are 4 copper layers, they are all shown in the top toolbar and not layer 99 2021-10-19: 33.2.0.9: Flipping the PCB to the back side keeps the zoomed area (preview V31) 2021-10-17: 33.2.0.9: 3D view: Viewing angle adjustable in context menu (tele to wide angle, preview V31) 2021-10-15: 33.2.0.9: Proportional rectangles can also be dragged at their corners (small black boxes) 2021-10-10: 33.2.0.9: Insulation milling: Big drill diameters can be milled as break-outs with the PCB outline (preview V31) 2021-10-08: 33.2.0.9: Menu "Service": Homepages of the listed service companies can be opened directly 2021-10-06: 33.2.0.9: Milling a front panel with Excellon: With thin material and chamfer on the outline, still run two height steps 2021-10-03: 33.2.0.9: Solved problems with update and preview functions: Refer to the Wiki: "No connect yet." 2021-10-03: 33.2.0.9: Rectangles can remain proportional (fixed aspect ratio i.e. height/width ratio, preview V31) 2021-10-01: 33.2.0.9: STEP output greatly accelerated 2021-09-27: 33.2.0.9: Pick&Place output: The variable "SMD" can be SMD or THT for "through hole technology" 2021-09-18: 33.2.0.9: Front panel milling: Cutouts and outline are milled in 3 steps for panel thicknesses greater than 3 mm 2021-09-11: 33.2.0.9: Closing a window did not always come up with the question "Save project first?" 2021-09-09: 33.2.0.9: Change of layer e.g. by placing a via switches the new working layer visible, if it was faded out previously 2021-09-08: 33.2.0.9: Command line parameter -g: May not have outputted all relevant files in every case 2021-09-02: 33.2.0.9: Gerber X2: Improved output of component and signal names with special characters "*", "%" and "," 2021-09-01: 33.2.0.9: Insulation milling: Set spindle rotation speed (EMC² / G-Code) 2021-09-01: 33.2.0.9: Pick&Place: Mirroring did not work when using handle crosses as reference 2021-08-21: 33.2.0.9: Flip PCB and edit it from the back side: Key [|], menu "View/Rear view" or new button in the sidebar 2021-08-09: 33.2.0.9: The STEP output from inside the 3D view can omit the components that are switched invisible 2021-08-09: 33.2.0.9: Copying component packages between projects also takes 3D STEP models along (within the same TARGET session) 2021-08-09: 33.2.0.9: Improved multi-level deletion when signal polygons are involved 2021-08-05: 33.2.0.9: Improved drilling plan with pictograms 2021-07-28: 33.2.0.9: Rename component, e.g. R17 -> R8: If number is already used, all the available numbers are proposed 2021-07-27: 33.2.0.9: Sidebar in PCB view: White component list at the bottom extends if space is available 2021-07-25: 33.2.0.9: Panelisation: When copying signal polygons, the new field "Aura" was not always copied correctly 2021-07-15: 33.2.0.9: Subsequent insertion of a 2- or 3-pole component (e.g. series resistor) splits the signal hit (preview V31) 2021-07-15: 33.2.0.9: BOM: Selection of component properties is remembered during the session 2021-07-15: 33.2.0.9: BOM, summarize components: Prefix and former search name in the database can be ignored 2021-07-12: 33.2.0.9: Starting a track and typing key [2] at the same position anew toggles the copper layer used 2021-07-08: 33.2.0.9: "Show signal names" in menu "View" 2021-07-07: 33.2.0.9: In many element dialogs the unit of the coordinates can be toggled by mouseclick (mm/mil, preview V31) 2021-07-06: 33.2.0.9: "Drillholes as pictograms" in menu "View" 2021-07-05: 33.2.0.9: Toggle Crosshairs: Dashed or solid (Settings/INI or Grid dialog) 2021-07-04: 33.2.0.9: MID: Coordinates of the vias can be exported as a list 2021-07-03: 33.2.0.9: MID: Vias are available, when having tracks on both sides on the 3D body 2021-07-02: 33.2.0.9: Lengthen segment (in context menu of small black box): Sometimes the wrong end was changed 2021-06-26: 33.2.0.9: 3D view: Lattice with key [#] also works with STEP models (as triangles) 2021-06-23: 33.2.0.9: Signal resistor in menu item "Show signal lengths" ignored copper thickness 2021-06-23: 33.2.0.9: Object inspector did not show last suggestion for coordinates (example: "copper thickness") 2021-06-16: 33.2.0.9: Drilling Plan with Pictograms: Drill holes that are not plated through are marked with an additional half-circle 2021-06-16: 33.2.0.9: 3D view: Properties "Plugged Via", "Capped Via" and "solder stop varnish" are taken into account for solder pads 2021-06-15: 33.2.0.9: Panelisation: Turnover panels sometimes had problems if the lower left corner was not in the origin 2021-06-15: 33.2.0.9: Nutzen setzen: Wendenutzen hatte unter Umständen Probleme wenn linke untere Ecke nicht im Ursprung lag 2021-06-14: 33.2.0.9: Lines, splines and tori can be converted to polygons using the small black boxes 2021-06-08: 33.2.0.9: Documented the SPICE commands in the Wiki and the TARGET Spice text editor has a link to that now 2021-06-04: 33.2.0.9: "Group as a module" in schematic view also groups the respective tracks in layout view 2021-05-20: 33.2.0.9: Introduced "Comment" as a new text function. Comments are not printed 2021-05-19: 33.2.0.9: Changing "Individual properties of the selected" sometimes caused an access violation 2021-05-18: 33.2.0.9: Added links to a Gerber viewer and to a GCode viewer 2021-05-17: 33.2.0.9: Calculation of the track resistance in the status bar considers "Thickness copper" of the project settings 2021-05-17: 33.2.0.9: Component browser: Import for KiCad Libraries 2021-05-08: 33.2.0.9: Settings (INI): The path for template project files can be set 2021-05-05: 33.2.0.9: Component Browser: Package selection shows Package-ID in the package image 2021-05-04: 33.2.0.9: More accurate solder paste reduction for SMD pads in % 2021-05-02: 33.2.0.9: Improved "Change round bend into sharp bend" 2021-05-02: 33.2.0.9: Changing of multi-line text sometimes caused problems 2021-04-30: 33.2.0.9: Signal polygons: Aura introduced, as a distance against other polygons with lower rank 2021-04-30: 33.2.0.9: Front panel: Contour detection improved 2021-04-29: 33.2.0.9: Component browser: Improved the contrast of SMD pad numbers in the package preview (white) 2021-04-27: 33.2.0.9: Settings (INI): Pilot router in PCB view at program launch 2021-04-23: 33.2.0.9: Menu "Packages" point "Change pitch of packages..." to change the length e.g. of wired resistors 2021-04-22: 33.2.0.9: Signal polygona, adjust auras: Problems occurred when different polygons overlap each other 2021-04-20: 33.2.0.9: Load old projects: PROPOSED_PACKAGE empty, but USED_PACKAGE existant: Repair PROPOSED_PACKAGE 2021-04-20: 33.2.0.9: DRC: Solder pads rotated by 45° could raise false short circuit error messages 2021-04-17: 33.2.0.9: Show signal names: Improved contrast 2021-04-17: 33.2.0.9: 3D view: Changed coordinates in the status bar to be the eye position 2021-04-15: 33.2.0.9: Schematic: Placing component pins onto ends of signal traces connects immediately or on demand 2021-04-13: 33.2.0.9: Isolation milling: Drills at the end of the process were mirrord wrong if no fiducial drills were used 2021-04-04: 33.2.0.9: Change the signal of signal traces in schematic: Take all copper tracks along, if the signal was changed completely 2021-04-03: 33.2.0.9: Gerber Output: Button [Standard] makes all drill files have the extention *.DRL 2021-04-01: 33.2.0.9: Bill of Material (BoM): "Summarize equal components" can be separated according to the assembly side 2021-03-30: 33.2.0.9: Gerber X2 information also for the drill tools in the Excellon file (ViaDrill, ComponentDrill, MechanicalDrill...) 2021-03-27: 33.2.0.9: Improved Gerber X2 and X3 output 2021-03-25: 33.2.0.9: GenCAD: Solder paste and solder mask are output as well 2021-03-25: 33.2.0.9: GenCAD: Arcs in the PCB outline are split into short chords, because some viewers do not implement ARCs 2021-03-25: 33.2.0.9: GenCAD: Shapes of pads are output more accurately 2021-03-25: 33.2.0.9: GenCAD: Signal polygons are passed as PLANEs 2021-03-25: 33.2.0.9: Panelisation: Improved the input of the number of ligaments and drills 2021-03-23: 33.2.0.9: "Look over my shoulder" in menu "Help" for improved customer service 2021-03-21: 33.2.0.9: Eagle export: Oblong pads sometimes were rotated by 90° 2021-03-16: 33.2.0.9: 3D view: With M2 on the top left button the view can be set parametrically 2021-03-11: 33.2.0.9: Gerber X3: Internal connection lines are no longer output as package lines 2021-03-09: 33.2.0.9: Gerber X3: Improved output data 2021-03-08: 33.2.0.9: Gerber X3: Manufacturer, distributor and order number are exportet 2021-03-08: 33.2.0.9: Signal length measuring: A via is recognized with the PCB thickness 2021-03-08: 33.2.0.9: Package generator: Colors as parameters can also be selected 2021-03-05: 33.2.0.9: XGerber output: The new Gerber-X3 files for pick-and-place are created 2021-03-05: 33.2.0.9: XGerber output: Gerber-X2 information also transfers signal and part assignment 2021-03-05: 33.2.0.9: IPC D-356 output: Pads are always listetd, even if they are already mentioned in the component 2021-03-05: 33.2.0.9: IPC D-356 output: Coordinates are based on the lower left corner of the PCB, as XGerber coords also do 2021-03-04: 33.2.0.9: Draw spirals: Clockwise did not work 2021-03-03: 33.2.0.9: Cancelled changing is not entered into undo list 2021-03-03: 33.2.0.9: New in the context menu: Convert drawing lines, tori and splines into signal tracks 2021-02-20: 33.2.0.9: Meander differential Pairs parametrically: The original tracks were not always shortened correctly 2021-02-19: 33.2.0.9: For circular PCBs, the ground plane could be cut horizontally under certain circumstances 2021-02-19: 33.2.0.9: XGerber output: Tori with non-rounded ends could cause problems 2021-02-19: 33.2.0.9: XGerber output: Special file extentions can also be defined for self created layer functions 2021-02-18: 33.2.0.9: Creating a rectangle with coordinate data ignored a relative origin 2021-02-18: 33.2.0.9: IPC356: For pads the column 38 was missing for " "=SMD, "P"=Plated oder "U"=Unplated 2021-02-18: 33.2.0.9: Change tori: With several selected tori and "Diameter" instead of "Radius", the radius was always changed 2021-02-12: 33.2.0.9: Bill of Material (BoM): Added fields "Distributor" and "Order number" 2021-02-10: 33.2.0.9: Component symbol dialog (schematic): Added a distributor and order number manager with online search 2021-02-05: 33.2.0.9: Component database: listing of packages significantly accelerated 2021-02-05: 33.2.0.9: Component database: Components can easier be removed from favorites lists 2021-02-02: 33.2.0.9: Differential pairs: Improved connecting at the end after [ESC] 2021-02-01: 33.2.0.9: XGerber output: "#" in the filename of "Copper top / bottom" always replaced by null (0) 2021-02-01: 33.2.0.9: Triangles, rectangles and slices without signal may have displayed their aura too small 2021-02-01: 33.2.0.9: Differential pairs: Place vias with key [.] 2021-02-01: 33.2.0.9: Differential pairs: Improved routing 2021-01-28: 33.2.0.9: Differential pairs: The previously set airwires are displayed again afterwards 2021-01-28: 33.2.0.9: Differential pairs: Lengthened tracks were sometimes connected inaccurately 2021-01-26: 33.2.0.9: DRC: Under certain circumstances, non-existing short circuits were reported 2021-01-16: 33.2.0.9: Panelization: Predetermined breaking points can be generated automatically 2021-01-13: 33.2.0.9: Component browser: The flag "My" for favorite components does not cover information any more 2021-01-12: 33.2.0.9: Commandline parameter -356 lets TARGET create an IPC-356 netlist automatically 2021-01-11: 33.2.0.9: DRC: The minimum widt for layers was ignored sometimes 2021-01-07: 33.2.0.9: Improved changing of multiline texts 2021-01-06: 33.2.0.9: Derive new signal name from pin name: If the signal name is already used, a cypher ist appended: _2, _3, ..., _9 2020-12-21: 33.2.0.9: XGerber output: Text function "Version" was ignorerd 2020-12-14: 33.2.0.9: 3D view: Round PCBs and round components were not always displayed correctly 2020-12-14: 33.2.0.9: 3D view: Sometimes tracks were omitted 2020-12-13: 33.2.0.9: Cross-probe (F3) with an component not yet placed in the PCB could cause a problem 2020-12-09: 33.2.0.9: Polygonal pads can be shown in the editior using the same rotation with wich they are used 2020-12-07: 33.2.0.9: TIFF in the print dialog: Several schematic pages can be exported as TIFF 2020-12-03: 33.2.0.9: Slow DRC did not detect several spacing violations under certain circumstances 2020-11-29: 33.2.0.9: Menu "Actions / Preparatory work": Added Convergence Pad 2020-11-27: 33.2.0.9: Print PCB: The predefined layer sets are selectable with button [Visible Layers] 2020-11-22: 33.2.0.9: Extend / shorten line: End hit or opposite end selectable 2020-11-22: 33.2.0.9: Cross probe with [F3]: Layers in the PCB are only switched on if the package would otherwise be completely invisible 2020-11-22: 33.2.0.9: Settings (INI): New entry "Show layers when searching" 2020-11-18: 33.2.0.9: Windows code page is checked on startup and is also selectable (Umlaute / Greek / Cyrillic etc.) 2020-11-17: 33.2.0.9: Move package: Phantom image shows at the handle cross whether placed on top or bottom of the PCB 2020-11-16: 33.2.0.9: DO-File for Specctra/Electra: At the end unprotect singly the signals that are fixed to a layer 2020-11-16: 33.2.0.9: DO-File for Specctra/Electra: After power routing -> forbid layers or increase costs 2020-11-16: 33.2.0.9: DO-File for Specctra/Electra: FanOut at the beginning if applicable 2020-11-16: 33.2.0.9: Pick&Place: Output restrictable to ASCII characters and "." as decimal separator 2020-11-14: 33.2.0.9: Display signal names: Use smaller font size for long names on short signal segments 2020-11-14: 33.2.0.9: Tooltips also show the module name, if available 2020-11-14: 33.2.0.9: Isolation milling: Settings for fiducial drills and RubOut are remembered 2020-11-14: 33.2.0.9: Pick&Place: If only components on the bottom side are placed, mirroring of coordinates can be switched off 2020-11-12: 33.2.0.9: DO file of the Specctra/Electra interface: 'select net "abc"' and 'unselect net "abc"' at the same time is prevented 2020-11-12: 33.2.0.9: Draw track in PCB: Key [-] places a via at the end of the track and terminates the mode witout changing the layer 2020-10-29: 33.2.0.9: Display signal names: White on dark traces, black on light traces 2020-10-29: 33.2.0.9: Display signal names: Do not show long names on short trace segments 2020-10-26: 33.2.0.9: DRC: "Wrong connection" treated non-rounded tracks like rounded tracks 2020-10-21: 33.2.0.9: Create signal polygon: The checkbox "also for vias" was ignored, if "Adjust auras" was clicked 2020-10-16: 33.2.0.9: Improved Eagle import regarding component names and signal names 2020-10-13: 33.2.0.9: Measuring and meander - controlled with the arrow keys of the keyboard - showed wrong values at the cursor 2020-09-28: 33.2.0.9: Added SnapEDA as source für component data in the component browser 2020-09-24: 33.2.0.9: DRC: Polygonal pads could cause wrong complaints about short circuits 2020-09-23: 33.2.0.9: 3D view could omit traces under certain circumstances 2020-09-15: 33.2.0.9: Script in package generator: Stacked IFs did not work 2020-09-09: 33.2.0.9: Isolation milling: The height before turning over the PCB is equal to the height at the very end (G-Code + NCP) 2020-09-09: 33.2.0.9: Isolation milling: For the output file, "Manual tool change with M00" can be selected for G-Code 2020-09-08: 33.2.0.9: 3D view: Inner copper layers could cause problems 2020-09-07: 33.2.0.9: Insulation milling with G-Code: Added the possibility for manual tool change with M00 2020-09-07: 33.2.0.9: Reo: Double signal segments are removed also if the width/aura is different; the larger width/aura remains 2020-08-31: 33.2.0.9: Added text function "Version" 2020-08-31: 33.2.0.9: Integrated a version management into the Info dialog 2020-08-26: 33.2.0.9: Edition "viewer" caused an error message at startup 2020-08-16: 33.2.0.9: Accelerated drawing of the grid in GDI+ enormously 2020-08-10: 33.2.0.9: Track fine-tuning with key [7] better considers copper additions in padstacks 2020-08-10: 33.2.0.9: PCB without schamatic: Pilot router did not connect certain pads 2020-08-10: 33.2.0.9: M2 onto a package button at the bottom of the PCB sidebar could possibly cause an error message 2020-08-10: 33.2.0.9: 3D view: Components with internal connections could possibly cause problems 2020-08-10: 33.2.0.9: XGerber output for NC version: Warning about commercial use sometimes inflated the output files 2020-08-07: 33.2.0.9: Tracks, signal tori and signal splines on layer 100 are also displayed in the 3D view on all copper layers 2020-08-06: 33.2.0.9: Signal tracks, tori and splines can keep their aura even in a signal polygon with the same signal 2020-08-04: 33.2.0.9: Project version can be stored in the "File Summary Info" of an NTFS drive 2020-08-03: 33.2.0.9: Moving of more than 500 elements shows only the overall outline (faster) 2020-08-01: 33.2.0.9: TARGET only noticed which monitor it was on, if it was not maximized when closing 2020-07-31: 33.2.0.9: DRC: Check for shortcuts in the PCB is independent of the grid size 2020-07-30: 33.2.0.9: Pilot router shows the remaining length of the signal als a circle at the cursor (length from the signal class) 2020-07-30: 33.2.0.9: OpenGL: Color of a single pin is no longer ignored 2020-07-29: 33.2.0.9: Interactive meandering for lenght matching of signals 2020-07-23: 33.2.0.9: Pilot router also works on round PCBs 2020-07-22: 33.2.0.9: PCB: Added manual "pilot router" as a bending mode 2020-07-21: 33.2.0.9: When saving a project, the IS_SMD property for some components may have been deleted 2020-07-19: 33.2.0.9: Fiducial marks can be automatically kept free from solder resist, even with an expansion 2020-07-16: 33.2.0.9: STEP output: Teardrops at component pads or test points were sometimes not output 2020-07-14: 33.2.0.9: TARGET 3001! V20 stands still, the current version is now V30 2020-07-12: 33.2.0.9: Component symbol buttons in the sidebar collect the favourite components in their context menu (Preview V30) 2020-07-12: 33.2.0.9: Pick&Place: For panelized boards the fiducials can be output for the first PCB only 2020-07-11: 33.2.0.9: DigitalTest DIF output: Identical packages are bundled together 2020-07-10: 33.2.0.9: Panelisation: PCBs can also be copied to the right and to the top 2020-07-09: 33.2.0.9: Fine tuning: With key [7] the selected tracks are optimized and tautened (Preview V30) 2020-07-08: 33.2.0.9: Component Database: Added field "SMD" in dialog package properties 2020-07-08: 33.2.0.9: Isolation milling: Added field "End height" for the parking height at the end of the NC program 2020-06-23: 33.2.0.9: Import from Ultra Librarian: If a pin width = 0, 0.3 mm is taken 2020-06-23: 33.2.0.9: Import from Ultra Librarian: If a pin number = 0, it is derived from the respective pad 2020-06-22: 33.2.0.9: Prefix reorganisation works, if component prefixes are written differently: Ref and REF 2020-06-22: 33.2.0.9: Search list on top of the sidebar is sorted alphanumerically now 2020-06-17: 33.2.0.9: Selection with [Shift] + M1 also works through nodes and vias (Preview V30) 2020-06-10: 33.2.0.9: Extremely complex 3D STEP models can be used by reduction of complexity (Preview V30) 2020-06-06: 33.2.0.9: For solder pads and vias the generation of ligaments for thermal pads can be suppressed (Preview V30) 2020-06-06: 33.2.0.9: Oblong drill holes could vanish with undo 2020-06-06: 33.2.0.9: Quick DRC: Message if a mounting drill hole touches an aura 2020-06-06: 33.2.0.9: XGerber import: Aperture macros (AM) with higher complexity can be read in 2020-06-05: 33.2.0.9: Cross probe with [F3]: A single pin selects it's corresponding pad and vice versa (not always the whole component) 2020-06-03: 33.2.0.9: Printing: Inserted warning if TrueType font size mismatched when printing 2020-06-03: 33.2.0.9: OpenGL: TrueType font size better matched in relation to GDI+ 2020-05-27: 33.2.0.9: Small black boxes: Added "Extend segment" to the context menu 2020-05-27: 33.2.0.9: DXF import: improved ellipses 2020-05-25: 33.2.0.9: Selection assistant: added solder stop and solder paste 2020-05-24: 33.2.0.9: Added point "100%" in menu "View" and in the zoom palette 2020-05-23: 33.2.0.9: Tooltips also show the pin name (=function) for pins and pads, if it is available 2020-05-18: 33.2.0.9: TIFF output: Added height and width as input fields 2020-05-15: 33.2.0.9: "Reload component properties from the database": The property COMPONENT_VALUE becomes the new component value 2020-05-14: 33.2.0.9: Improved Eagle export 2020-05-13: 33.2.0.9: Text on a copper layer was shown in 3D view on the Z-height of the silk-screen 2020-05-12: 33.2.0.9: Problems occurred with all changes when relative coordinates were used 2020-05-10: 33.2.0.9: Toggle tooltips with a button on the right in the sidebar 2020-05-10: 33.2.0.9: Tracks dialog: Possible copper layers can be clicked directly 2020-05-10: 33.2.0.9: Tooltips are displayed in the element dialogs 2020-05-07: 33.2.0.9: Pad numbers of SMD pads are however displayed if no copper layer is visible at all 2020-04-29: 33.2.0.9: Tooltip shows the elements hovered by the mouse (Settings / INI) (Preview V30) 2020-04-25: 33.2.0.9: BOM: Inserted checkbox: "Shall order numbers known at IBF be reloaded online?" 2020-04-20: 33.2.0.9: Projects with old ground planes cannot be changed and saved anew any more 2020-04-20: 33.2.0.9: Signal classes can have special spacings among each other (Preview V30) 2020-04-07: 33.2.0.9: Component import: Project variables are created, if they are referenced by texts with Funktion=Special 2020-03-25: 33.2.0.9: Creating test points had problems with signal polygons that were already filled 2020-03-24: 33.2.0.9: Filling of signal polygons under certain circumstances reduced the aura of pads 2020-03-24: 33.2.0.9: XGerber output: Triangles for filling ground planes sometimes overlapped too much 2020-03-19: 33.2.0.9: Scripts for the BOM output: "Numeric=Yes/No" for numbers as numbers in Excel (xlsx) 2020-03-18: 33.2.0.9: DXF files may start with blank lines 2020-02-28: 33.2.0.9: XGerber export: Triangles for filling ground planes overlap now (overcome an UCAMCO rendering error) 2020-02-25: 33.2.0.9: Command line -i for info: Added line "Pads" that shows the number of soldering pads on the PCB 2020-02-25: 33.2.0.9: XGerber output: One decimal place more accuracy (3.6 instead of 3.5) 2020-02-20: 33.2.0.9: Electra: Sometimes vias had no aura 2020-02-19: 33.2.0.9: Unfilled signal polygons are only selected if the area plane is switched to visible 2020-02-19: 33.2.0.9: DRC: Extra error message, if a signal polygon is filled too thin 2020-02-17: 33.2.0.9: Front panel started erroneously with schematic view 2020-02-16: 33.2.0.9: Improved PDF output, if the whole sheet is inverted 2020-02-11: 33.2.0.9: Added PCB outlien assistant to the magic wand in PCB view 2020-02-11: 33.2.0.9: Signal polygons: Also vias can be provided with thermal ligaments like thermal pads 2020-02-09: 33.2.0.9: PCB view: Component list right lower corner in the sidbar is sorted alphanumerically: R1,R2,R11,R12,R100 2020-02-07: 33.2.0.9: As of edition economy also 4-layer board as a default template for new projects 2020-02-07: 33.2.0.9: BOM and Pick&Place: Origin (0|0) left bottom of the PCB or absolute or relative Coordinates 2020-02-06: 33.2.0.9: Excellon output for front panel milling: Pre-drilling is now only optional 2020-02-02: 33.2.0.9: Check project: Improved the detection of short circuits in the schematic 2020-01-30: 33.2.0.9: Quick DRC: Star-shaped ground was ignored for the spacing cheks with signal polygons 2020-01-24: 33.2.0.9: 3D editor: Improved the editing of extruded polygons 2020-01-24: 33.2.0.9: Meanders of differential pairs can be edited and removed 2020-01-19: 33.2.0.9: Quick DRC: Under certain circumstances overlap of signal polygons with the same rank were not detected 2020-01-19: 33.2.0.9: Quick DRC: Under certain circumstances the layer of an error was not specified correctly 2020-01-16: 33.2.0.9: Background color when importing transparent PNGs and GIFs is white now instead of black 2020-01-09: 33.2.0.9: LicenseCounterFile: Computer is only removed, if the closing TARGET is the last running instance on the computer 2019-12-31: 33.2.0.9: Differential pairs can be meandered together 2019-12-17: 33.2.0.9: Added "Capped" and "Plugged" for vias in the selection assistant 2019-12-15: 33.2.0.9: Check project: Errors can be deleted manually in the error list 2019-12-15: 33.2.0.9: Front panel: Breakthroughs could wrongly be marked as "from behind" (back) 2019-12-03: 33.2.0.9: PCB-POOL calculator: TARGET uploads the project file directly (optional) 2019-11-23: 33.2.0.9: A differential pair can be routed if there are more than 2 pads on the signal (e.g. with a suppressor diode) 2019-11-15: 33.2.0.9: The layers of signal polygons were not handled correctly when moving layers up or down in the layer stack 2019-11-12: 33.2.0.9: Mirroring in PCB view also regards padstacks now 2019-11-11: 33.2.0.9: Front panel milling: Conical countersinks were not prepared by flat millings 2019-11-07: 33.2.0.9: Front panel milling: Cut-outs with an edge length < 10 mm or a surface < 9cm² are completely chipped 2019-11-04: 33.2.0.9: Signal class with length specification: Circle shows remaining length during track routing 2019-11-04: 33.2.0.9: DXF import can cope with degenerated NURB splines 2019-11-02: 33.2.0.9: In Circuit Test (ICT): Considerably improved the generator for test adapters 2019-10-31: 33.2.0.9: Automatic test points on top were not set if the board outline was created as a component 2019-10-28: 33.2.0.9: Command line, parameter -i: Text file contains more information on the project 2019-10-28: 33.2.0.9: Dual-screen operation: Numbers of Windows screens may be wildly mixed 2019-10-24: 33.2.0.9: DRC: Quick checking may have reported spacing errors, despite of star-shaped ground 2019-10-23: 33.2.0.9: DRC: Quick checking may have showed errors with padstacks that were no real errors 2019-10-11: 33.2.0.9: Improved the dragging of the corners of polygons 2019-10-11: 33.2.0.9: Eagle export could cause double pin names in the schematic 2019-10-10: 33.2.0.9: DXF import: Comment lines (999) at the very beginning of the DXF file could cause problems 2019-10-04: 33.2.0.9: Signal polygons: Thermal ligaments are at least as wide as the filling width and at most double as wide 2019-10-04: 33.2.0.9: Signal polygons: Thermal ligaments for SMDs are max 2/3 of the thin side 2019-10-04: 33.2.0.9: Signal polygons: Thermal ligaments for drilled pads are max 2/3 of the drill hole 2019-09-24: 33.2.0.9: Eagle import: "–" in XML caused problems and is now replaced by "-" 2019-09-18: 33.2.0.9: Variant chosen for Pick&PLace does not affect the variant shown in the schematic 2019-09-18: 33.2.0.9: Cross probe did not work in all cases 2019-09-13: 33.2.0.9: Change package, Assign symbol: Selection box, if component name comes from schematic symbol or name of PCB package 2019-09-10: 33.2.0.9: Signal polygons: The ligaments of thermal pads could be created too thin in certain cases 2019-09-10: 33.2.0.9: OpenGL: The opacity for "Colormix" can be adjusted for transparent layers 2019-09-06: 33.2.0.9: 3D view regards variant components: assembled / unassembled, different values 2019-09-05: 33.2.0.9: Component exchange: The fonts for importing components are used (see Settings/INI) 2019-09-04: 33.2.0.9: Componiverse: Components with several pins stacked in the same location were not uploaded sometimes 2019-08-28: 33.2.0.9: PDF output: Mirrored right-aligned texts may have been displaced 2019-08-23: 33.2.0.9: PANEL-POOL accessories: The name of the accessory part from the eStore is displayed 2019-08-21: 33.2.0.9: Import Eagle libraries: Improved the layer assignment 2019-08-21: 33.2.0.9: Eagle import: Tracks on layer "Pads" caused problems 2019-08-21: 33.2.0.9: XGerber output: Replaced the deprecated %IN...*% (Image Name) by G04...* (comment) 2019-08-21: 33.2.0.9: Signal polygons: Thermal ligaments are max. 2/3 of the thin side of the pad but min. the filling width 2019-08-21: 33.2.0.9: Signal polygons: Thermals are also created if the pad aura is smaller than the minimum spacing 2019-08-20: 33.2.0.9: BOM: Combining identical parts and outputting rotation, position and side are mutually exclusive 2019-08-20: 33.2.0.9: DRC: Improved the quick checking and set it as default 2019-08-15: 33.2.0.9: Two components can be declared as connected to avoid airwires - e.g. 2 connectors by a cable 2019-08-15: 33.2.0.9: Excel output: Fields with numbers are also formatted as numbers (e.g. for a BOM) 2019-08-10: 33.2.0.9: DRC: When the computation of airwires was switched off, unrouted signals were not always reported 2019-07-29: 33.2.0.9: Computation of airwires with overlapping signal polygons of the same signal sometimes caused problems 2019-07-26: 33.2.0.9: TIFF files can also be created using a print script 2019-07-25: 33.2.0.9: When ordering a front panel from Beta-LAYOUT, accessories from their eStore can also be ordered 2019-07-19: 33.2.0.9: When opening a project file also backups and autosaves show up directly. E.g.: *.BK1 and *.T3001A 2019-07-18: 33.2.0.9: Improved deriving of polygonal pads 2019-07-14: 33.2.0.9: Dual screen display: Status bar shows under the active window 2019-06-12: 33.2.0.9: Program launch with double click on a project file: Position of the sidebar sliders was not remembered 2019-06-12: 33.2.0.9: Filling complex signal polygons could cause "Out-Of-Memory" 2019-06-09: 33.2.0.9: The coordinates unit of a window for editing a symbol depends on the previously open schematic window 2019-06-03: 33.2.0.9: Printing and PDF scripts: Introduced "QUIET" (suppress several unimportant messages) 2019-05-22: 33.2.0.9: Harmonization in highlighting of unrouted signals and the calculation of airwires 2019-05-22: 33.2.0.9: Signal polygons: Improved computation of thermal pads and airwires 2019-05-22: 33.2.0.9: During printing several graphical elements were erroneously enlarged slightly 2019-05-14: 33.2.0.9: Push&Shove: Improved graphics when pushing tracks 2019-05-04: 33.2.0.9: Insulation milling: Too much was milled away around the outline of signal polygons 2019-04-17: 33.2.0.9: Signal polygons: Improved the connection with thermal pad ligaments for skew pads 2019-04-16: 33.2.0.9: Menu Point "Settings / Project signals / Signal name / Properties" 2019-04-16: 33.2.0.9: PovRay: Single texta in the silkscreen were sometimes omitted 2019-04-11: 33.2.0.9: Thick tracks have attracted new segments so much during their placemant that those were not placed at all 2019-04-11: 33.2.0.9: Pads centers, that are located somewhere inside a thick track, are regarded as connected 2019-04-05: 33.2.0.9: Electra interface can handle auras as minimum spacings or not 2019-03-27: 33.2.0.9: Signal polygon: An element is considered connected when its center point touches the filled polygon 2019-03-24: 33.2.0.9: Added a confirm message before deleting many elements 2019-03-22: 33.2.0.9: Added a message before a PCB order if unfilled signal polygons can be found 2019-03-22: 33.2.0.9: Elements without signal now alwas have an aura of 0.15 mm min. if they are on a copper layer 2019-03-21: 33.2.0.9: Improved Pick&Place, if the PCB was panelized 2019-03-20: 33.2.0.9: Accelerated and improved the XGerber output 2019-03-20: 33.2.0.9: Front panel: Chamfer on outer contour possible 2019-03-20: 33.2.0.9: Insulation milling: Added SVG as format for laser plotters 2019-03-20: 33.2.0.9: DRC: Improved the check for too narrow slot holes 2019-03-19: 33.2.0.9: Signal polygons: With "Adjust auras" also component pads without pin number can become thermal pads 2019-03-13: 33.2.0.9: Insulation milling: Move up and then to center before tool change 2019-03-13: 33.2.0.9: Insulation milling: Engraved texts in copper layers were milled away again with RubOut 2019-03-09: 33.2.0.9: Measuring: Measure is shown as cursor hint 2019-03-07: 33.2.0.9: An error could occur during copying if polygons were present in a concerned signal 2019-03-07: 33.2.0.9: DRC: Violet airwires in the schematic could cause short-circuit error messages 2019-03-05: 33.2.0.9: Accelerated the placement assistant enormously 2019-03-04: 33.2.0.9: Insulation milling: Optimized the paths during insulation 2019-03-02: 33.2.0.9: Remove a signal from a signal class: The minimum width and spacing are reset to the standard values 2019-03-01: 33.2.0.9: Electra interface can handle differential pairs 2019-03-01: 33.2.0.9: Element to the front / into the background works with polygons 2019-02-28: 33.2.0.9: Groundplane separation works with the new signal polygons now 2019-02-28: 33.2.0.9: Insulation milling: Fixed problem with RubOut 2019-02-26: 33.2.0.9: XGerber output: Addition and reduction of solder paste and solder stop mask also work with polygonal Pads 2019-02-25: 33.2.0.9: GenCAD can export packages also without FLIP in the SHAPE call 2019-02-20: 33.2.0.9: A problem filling signal polygons was fixed 2019-02-20: 33.2.0.9: Handle crosses for symbols and packages must be set with an M1 click 2019-02-20: 33.2.0.9: Pressed middle mouse button (mouse wheel) moves the sheet 2019-02-19: 33.2.0.9: Insulation milling completely revised: RubOut new and PCB outline with automatic radius correction 2019-02-12: 33.2.0.9: Panelisation: Turnover panel had sometimes problems with padstacks 2019-02-12: 33.2.0.9: Vias are handed over to Electra with better size adjustment 2019-02-03: 33.2.0.9: Sometimes the component browser hid behind the main window and blocked everything 2019-02-02: 33.2.0.9: Excange component: Component can no longer get ripped up 2019-01-30: 33.2.0.9: DXF import: Unexpected group codes could lead to errors 2019-01-29: 33.2.0.9: Percentage reduction of solder paste also works with polygonal solder pads (convex centered polygons) 2019-01-27: 33.2.0.9: Panelisation: Turnover panels possible (right-left or top-bottom) 2019-01-23: 33.2.0.9: For torus, circle, disk, node and centering marks: Toogle between radius and diameter 2019-01-23: 33.2.0.9: Removed dark theme user interface (was experimental) 2019-01-23: 33.2.0.9: Button [Show error list again] left top is removed, if the project closes or if another project gets active 2019-01-23: 33.2.0.9: Black window background color: Cursor for drawing tracks gets white 2019-01-22: 33.2.0.9: Black window background color: The small black boxes for movements get white 2018-12-30: 33.2.0.9: Key [,] during track routing switches to the last recently used copper layers (type several times) 2018-12-18: 33.2.0.9: Direct connection to the component databases Ultra Librarian and SamacSys 2018-12-17: 33.2.0.9: DRC: "Track segment awry" depends on the length/width relation 2018-12-10: 33.2.0.9: Push&Shove: Reduced flickering and the wait cursor is not flashing up steadily 2018-12-07: 33.2.0.9: DRC: Check for spacing has been accelerated significantly 2018-12-07: 33.2.0.9: Sometimes the result of Push&Shove was not accepted 2018-12-04: 33.2.0.9: Push&Shove shows in the status bar below, if a collision is detected 2018-11-26: 33.2.0.9: TARGET 3001! V19 stands still, the current version is now V20 2018-11-26: 33.2.0.9: Added Push&Shove routing as V20 preview 2018-11-25: 33.2.0.9: Select a part of a track string: Click the first segment with M1 and the last with [Shift] + M1 2018-11-21: 33.2.0.9: Airwires Dialog displays the number of airwires per signal and the sum 2018-11-21: 33.2.0.9: XGerber output via command line might have caused problems with the generation of thermal pads 2018-11-20: 33.2.0.9: Selection assistant: Elements with set color can be selected 2018-11-19: 33.2.0.9: Added the cross hairs to the grid dialog 2018-11-15: 33.2.0.9: Settings (Project): The date format can be set for the project 2018-11-12: 33.2.0.9: Reorganisation sometimes caused problems with the signal polygons 2018-11-12: 33.2.0.9: Connect a signal to a bus: The bus segments were devided inncorrectly 2018-11-07: 33.2.0.9: Signal polygons: Texts as deletion in copper planes keep their inner "unconnected" islands 2018-10-23: 33.2.0.9: Cross probe from schematic to PCB: Sometimes question "Place missing package?" did not pop up 2018-10-16: 33.2.0.9: Bill-Of-Material: When summarizing also differences of the selected properties from the listbox are regarded 2018-10-11: 33.2.0.9: Added button [Show active copper layer always on top] in the sidebar - also with key [q] 2018-10-10: 33.2.0.9: Signal polygons (ground planes) are displayed in 3D view 2018-10-09: 33.2.0.9: Added the text property "Right-aligned" in the selection assistant 2018-10-08: 33.2.0.9: Right-aligned component names and values could be displaced when opening existing projects 2018-09-30: 33.2.0.9: Improved the appearance of right-aligned text 2018-09-28: 33.2.0.9: Block diagram: Signals in blocks can be renamed more easily 2018-09-14: 33.2.0.9: Thermals in signal polygons: The ligaments can be at most as wide as the smaller dimension of the pad 2018-09-13: 33.2.0.9: Optimized size of pad numbers for printout 2018-09-13: 33.2.0.9: Accelerated calculation of signal polygons and reduced file size 2018-09-12: 33.2.0.9: After filling and un-filling a signal polygon the correct thermal ligaments remain 2018-09-12: 33.2.0.9: Under extreme circumstances, a signal polygon was filled incorrectly 2018-09-03: 33.2.0.9: Eagle import: Ground planes are converted to signal polyons now 2018-09-03: 33.2.0.9: Eagle import: Arcs in signal polygons are converted with a higher precision 2018-09-01: 33.2.0.9: "Painting" polygons without a signal: Improved the function of the menu points on the small black boxes 2018-08-30: 33.2.0.9: Texts with function "component value": The component property COMPONENT_VALUE is displayed, if available 2018-08-22: 33.2.0.9: Pinswap: For components with prefix K, J or C with 4+ pins the pin names do not have to be swapped 2018-08-20: 33.2.0.9: Normal mounting holes and breadboard holes do not count as pins/pads 2018-08-20: 33.2.0.9: PCB outline assistant: Select whether origin is in the center or bottom left 2018-08-17: 33.2.0.9: Sometimes wrong airwires versus the coordinates origin were displayed 2018-08-14: 33.2.0.9: Dual screen mode is saved in the project 2018-08-13: 33.2.0.9: PCBs as In-Circuit-Test adapters (ICT) can be generated automatically for test points (top and bottom) 2018-07-27: 33.2.0.9: A click into the title bar of a child window often unintentionally maximized this window 2018-07-24: 33.2.0.9: ASCII IO interface: Added cammand "Page" for the names of the schematic pages 2018-07-22: 33.2.0.9: Signal polygons: Overlapping polygons with different ranks also show correctly in unfilled state 2018-07-18: 33.2.0.9: PCB view: Key [<] hides all signal polygons, [>] fills all signal polygons anew 2018-07-18: 33.2.0.9: [Ctrl] + [a] did not select the signal polygons correctly 2018-07-17: 33.2.0.9: DRC: By the filling of the signal polygons all respective copper layers were switched visible 2018-07-12: 33.2.0.9: MID: Pin 1 or the cathode can be marked for manual assembly 2018-07-12: 33.2.0.9: MID: The names or values of the components can be displayed for manual assembly 2018-07-11: 33.2.0.9: After installation in English language: Enter screen diagonale in inch not in millimeters 2018-07-10: 33.2.0.9: Signal polygons: Roundings are no longer frayed 2018-07-10: 33.2.0.9: Several components can derive their variant info from another variant component (V20 preview) 2018-07-10: 33.2.0.9: Very unsymmetric polygonal pads sometimes caused problems with connection 2018-07-09: 33.2.0.9: Saving of projects with password could under certain circumstances lead to problems 2018-07-06: 33.2.0.9: XGerber: Standardized file extensions for Gerber files 2018-07-05: 33.2.0.9: Problems could arise with Text in the clipboard from Word or Excel 2018-07-02: 33.2.0.9: After the creation of a signal polygon, Undo/Redo didn't work properly 2018-06-27: 33.2.0.9: Depth can also be set for Autosaves from 0 ... 9: T3001A, T3001B ... T3001I 2018-06-16: 33.2.0.9: The COMPONIVERSE is enhanced by the BUILDER (online component designer) 2018-06-15: 33.2.0.9: Reverse engineering: When loading images into the background, the PCB outline can be used as size 2018-06-15: 33.2.0.9: Images (in rectangles) can be displayed more ore less opaque on the screen (transparency) 2018-06-12: 33.2.0.9: Signal polygons: Airwire computation and DRC can ignore unconnected islands 2018-06-12: 33.2.0.9: Signal polygons: Inserted the list of all signal polygons into the menu 2018-05-24: 33.2.0.9: Route track: M3 places a via, exactly like key [.] 2018-05-18: 33.2.0.9: A PCB track or via started inside a signal polygon inherits the signal of the polygon 2018-05-15: 33.2.0.9: Improved "Reverse Engineering" 2018-05-08: 33.2.0.9: GenCAD: Alphanumeric pad names instead of only the pin number 2018-05-06: 33.2.0.9: Signal polygons always regard the special spacings for single copper layers 2018-05-05: 33.2.0.9: Improved 3D representation with padstacks 2018-05-03: 33.2.0.9: Improved Panel-POOL calculator (also V17 and V18) 2018-05-03: 33.2.0.9: Improved PCB-POOL calculator (also V17 and V18) 2018-05-01: 33.2.0.9: XGerber output: Improved output of oval pads with a multiple of 90° as rotation 2018-04-26: 33.2.0.9: XGerber import: Polygonal pads can be imported 2018-04-23: 33.2.0.9: Isolation milling: G-Code now has a comment with the tool description after each tool change command 2018-04-22: 33.2.0.9: Drawing-polygons do not decompose into triangles and can be handled more easily 2018-04-19: 33.2.0.9: Move signal torus: Width and minimal spacing are shown 2018-04-05: 33.2.0.9: Isolation milling: non-rounded ends with signal tori were ignored 2018-04-05: 33.2.0.9: Improved computation of airwires if signal polygons are involved 2018-04-05: 33.2.0.9: Isolation milling: Engraver bit calculator worked only on tab "copper top" 2018-04-03: 33.2.0.9: XGerber output: Additional GerberX2 information can be switched off 2018-03-28: 33.2.0.9: Dialogs "Change symbol" and "Change package" added the package name in field "Component" 2018-03-16: 33.2.0.9: Interface to the Aisler PCB calculator 2018-03-14: 33.2.0.9: Fill signal polygons: Padstacks with a negative Adding could lead to shortcuts 2018-03-14: 33.2.0.9: XGerber output: Added GerberX2 FileFunction information 2018-03-12: 33.2.0.9: XGerber and Excellon output: Addition possible for the drill diameter of plated-through pads and vias 2018-03-08: 33.2.0.9: PDF gereration: Command "NewPage" starts a new page within the PDF 2018-03-06: 33.2.0.9: Signal polygons: Thermals are only generated, if the filling width is smaller than height and width of the pad 2018-03-01: 33.2.0.9: Panelize PCBs: The single copies are eache grouped as a module and the airwires are switched off 2018-02-28: 33.2.0.9: New PCB-POOL calculator 2018-02-22: 33.2.0.9: Placing of vias in polygons of thesame signal: "No aura for these layers:" is adjusted 2018-02-14: 33.2.0.9: When editing with key [e] only single signal polygons can be changed (sequentially) 2018-01-30: 33.2.0.9: Replace/update component: "Replace properties completely" saved some properties from the old component 2018-01-23: 33.2.0.9: MID: An offset occurred, if a PCB outline was on layer 23 additionally to the 3D MID body 2018-01-22: 33.2.0.9: Printing: TARGET remembers "fit to page" 2018-01-21: 33.2.0.9: Alignment assistant: Accept the package properties for "Package without schematic symbol" 2018-01-21: 33.2.0.9: Accelerated display of signal polygons on the screen 2018-01-18: 33.2.0.9: MySQL database: 3D STEP models may be bigger than 1 MB 2018-01-17: 33.2.0.9: Isolation milling via HPGL: Line's end can be CR or CRLF 2018-01-02: 33.2.0.9: Integrated a new memory manager, which significantly accelerates many actions 2017-12-26: 33.2.0.9: PCB-POOL frontpanel: Corrected price calculation for engraving with anodized aluminum blue, green and red 2017-12-21: 33.2.0.9: Schematic: Added menu point "Update old components..." 2017-12-20: 33.2.0.9: Introduced an additional viewer password 2017-12-11: 33.2.0.9: Assembly with PCB-POOL checks again for identicalness of the order numbers 2017-12-08: 33.2.0.9: Thermal pads with signal polygons: Ligaments were not created if the aura was smaller than the minimum spacing 2017-12-07: 33.2.0.9: Component browser: Improved the import of user defined parameters from CSV files 2017-12-05: 33.2.0.9: Under certain circumstances the reorganisation caused a memory overflow 2017-12-03: 33.2.0.9: Improved DXF import for Entities with a negative Z value in "Extrusion Direction" 2017-12-03: 33.2.0.9: MID view: Button left top for standard alignment shows size of MID body left side in the status bar 2017-12-02: 33.2.0.9: Symbol dialog: Added button [Datasheet] 2017-12-02: 33.2.0.9: Signal polygons: Inserted point "Entire PCB area..." in menu "Actions / Ground planes" 2017-12-02: 33.2.0.9: Signal polygons: Menu point on small black boxes: "Enter coordinates" like with key [+] 2017-11-27: 33.2.0.9: DRC: Ligaments of thermal pads could cause an unrecognized short-cut under certain circumstances 2017-11-22: 33.2.0.9: MID: Flattened and accelerated air wires 2017-11-17: 33.2.0.9: DRC: Overlapping signal polygons with equal rank could cause an unrecognized short-cut 2017-11-15: 33.2.0.9: Component browser: Extra: Generate components from CSV 2017-11-13: 33.2.0.9: Airwire dialog: Introduced field "Fill polygons always anew" 2017-11-10: 33.2.0.9: Loading a project file: Sometimes the assignment of a signal to a signal class was not remembered 2017-11-09: 33.2.0.9: Undo after changes could still cause errors if airwires were involved 2017-11-08: 33.2.0.9: Create PDFs directly: The image was shifted to the left, when mirroring; thus it was often even invisible 2017-11-06: 33.2.0.9: Signal polygons: Possibility to disable automatic thermal pads for pads that are connected manually 2017-11-02: 33.2.0.9: Component browser: Menu "Extra" point "Reload properties from CSV..." loads component properties 2017-10-30: 33.2.0.9: Reo: A track is split, if a pad/via of the same signal is placed in the middle on it 2017-10-30: 33.2.0.9: Create PDFs directly: Box "Texts as drawings" makes texts more exact, but PDF files bigger and not searchable 2017-10-26: 33.2.0.9: Signal polygons with a very chunky filling grid do not forward the signal 2017-10-25: 33.2.0.9: Thermal pads: The junction of the ligaments to the polygon could cause unesthetic spikes 2017-10-23: 33.2.0.9: Trim lines: Circles are cut correctly also if several lines are involved 2017-10-23: 33.2.0.9: Isolation milling: Tools can be predefined according to a tool magazine 2017-10-21: 33.2.0.9: Improved the preparation of an MID 2017-10-18: 33.2.0.9: Undo after changes could cause errors if airwires were involved 2017-10-13: 33.2.0.9: Undo/redo list when right-clicking onto the [Undo]/[Redo] buttons in the toolbar 2017-10-13: 33.2.0.9: Undo info as hint on the [Undo]/[Redo] buttons 2017-10-13: 33.2.0.9: Improved handling of printer problems 2017-10-10: 33.2.0.9: Accelerated Reo and DRC 2017-09-23: 33.2.0.9: DRC: Field "No aura for these layers:" with pads and vias was ignored by the spacing check 2017-09-21: 33.2.0.9: CXF import: The manufacturer information was deleted 2017-09-14: 33.2.0.9: PDF output: Several viewers showed stripes with texts 2017-09-12: 33.2.0.9: Move package with hidden name or value: Suppressed ripup message 2017-09-04: 33.2.0.9: PDF output via script: #X is replaced by path of the current worfile 2017-09-04: 33.2.0.9: Signal polygon: Improved conversion of old polygons with inner breakouts 2017-09-01: 33.2.0.9: Viewer: Accelerated loading of projects 2017-09-01: 33.2.0.9: Improved password protection 2017-08-31: 33.2.0.9: New signal polygons can have a different color 2017-08-31: 33.2.0.9: New signal polygons: Ligaments with thermal pads up to twice as wide as the line width of the polygon 2017-08-31: 33.2.0.9: DXF output: Drill holes can be output as open circles (Options) 2017-08-29: 33.2.0.9: New signal polygons: Copy&paste caused problems (also panelisation) 2017-08-29: 33.2.0.9: PDF direct: Improved height an lenght of texts with TrueType fonts 2017-08-24: 33.2.0.9: OpenGL: TrueType text looked bad, if color mixing was switched off 2017-08-24: 33.2.0.9: OpenGL: Zooming with the mouse wheel during selecting with [s] created double images 2017-08-24: 33.2.0.9: DXF import: Sometimes texts and triangles caused problems 2017-08-24: 33.2.0.9: Printing polygons or exporting them to a PDF: Closed the gaps between the tringles ("beams") 2017-08-23: 33.2.0.9: New signal polygons: Introduced control of changing of auras 2017-08-23: 33.2.0.9: New signal polygons: Solved problems with padstacks when converting old polygons 2017-08-23: 33.2.0.9: Accelerated DRC 2017-08-23: 33.2.0.9: Arcs (tori) can be converted to line segments: Menu "Actions / Special functions" 2017-08-22: 33.2.0.9: The question for converting old polygons could raise an error 2017-08-21: 33.2.0.9: [Internal connections] in package dialog: Sometimes selected clusters were not accepted 2017-08-21: 33.2.0.9: Settings / Options: Lenght units not only in mm 2017-08-21: 33.2.0.9: New signal polygons: Hatched filling sometimes had errors 2017-08-18: 33.2.0.9: DRC spacing violation: TARGET shows the source of the minimum spacing value: DRC / Signal / Layer / Aura 2017-08-17: 33.2.0.9: Create PDFs directly: Improved color management 2017-08-16: 33.2.0.9: New signal polygons: Accelerated computation of ground plane polygons tremendously 2017-08-16: 33.2.0.9: OpenGL, transparent view: Triangle borders in new ground planes invisible 2017-08-16: 33.2.0.9: Rename signals: Dialog resizable, improved use of mousewheel 2017-08-16: 33.2.0.9: Improved rotation of multiline text 2017-08-13: 33.2.0.9: Crosshairs stippled 2017-08-13: 33.2.0.9: Package selection in the sidebar lower right: Position of the recently placed package is remembered 2017-08-13: 33.2.0.9: Package selection: Improved position of the button with the green [+] (Create new package) 2017-08-13: 33.2.0.9: Edit package from the database: Message "Rip component up?" abandoned 2017-08-13: 33.2.0.9: Rename signal: Improvement if several subsequent signals shall be renamed 2017-08-13: 33.2.0.9: Airwire computation: Improvement with connections using the new signal polygons 2017-08-11: 33.2.0.9: Rename signal: Improvement for right-aligned signal names 2017-08-10: 33.2.0.9: A password can be assignd to a projekt file or the installed license 2017-08-10: 33.2.0.9: A via fence for RF shielding can be defined along a polyline 2017-08-10: 33.2.0.9: A polygonal breadboard area can be defined in the PCB 2017-08-06: 33.2.0.9: DRC: Spacing check with tori failed under certain circumstances 2017-07-31: 33.2.0.9: Direct PDF creation (not via a "PDF printer") 2017-07-28: 33.2.0.9: TARGET 3001! V18 stands still, the current version is now V19 2017-07-25: 33.2.0.9: New signal polygons: Automatic spacing to the PCB edge 2017-07-25: 33.2.0.9: Toast notofications (small orange windows) always brought TARGET to the Windows foreground 2017-07-06: 33.2.0.9: Polygonal pads editor: Included mirror hor/ver and rotation in button [Special] 2017-07-05: 33.2.0.9: Copy & paste in the schematic: Sometimes names of REF pins were assigned erroneously 2017-07-05: 33.2.0.9: Isolation milling: Calculator for the engraving bit (V19 preview) 2017-07-02: 33.2.0.9: Improved XGerber import for arcs (also in G36/G37 regions) 2017-06-30: 33.2.0.9: BOM header: Project variable "AUTHOR" is used and all variables starting with "BOM-" (V19 preview) 2017-06-29: 33.2.0.9: The aura of triangles is now obviously rounder with the calculation of ground planes into lines (V19 preview) 2017-06-26: 33.2.0.9: MID: mm grid and helping-ray for exact positioning 2017-06-26: 33.2.0.9: New signal polygon functions as V19 preview 2017-06-12: 33.2.0.9: Insert a reference symbol: Select signal with double click (M11) 2017-06-11: 33.2.0.9: Improved the management of Differential Pairs 2017-05-29: 33.2.0.9: Filled rectangles, triangles and circles in symbols are always drawn in the background 2017-04-26: 33.2.0.9: Ground plane computation: Reduction of pad size using a padstack was not regarded for the aura's size 2017-04-24: 33.2.0.9: Optimisation of collinear track segments sometimes cut-off pads in the middle 2017-04-15: 33.2.0.9: Hide and show component name or value: Position and size of the texts remain 2017-04-10: 33.2.0.9: BOM: Select modules: Additional entry "remaining components" 2017-03-17: 33.2.0.9: Printing: Diameter of centering drill holes adjustable 2017-03-03: 33.2.0.9: Under certain circumstances the message "Computation of air wires takes too long" 2017-03-03: 33.2.0.9: Under certain circumstances the "phantom image" during the movement of components was not displayed 2017-01-09: 33.2.0.9: Command line option -g creates XGerber and Excellon automaticaly: TARV18.EXE "FilePath" -g 2017-01-04: 33.2.0.9: Input fields for coordinates may contain "+", "-", "*" and "/" as computational operators 2016-11-29: 33.2.0.9: "Replace components..." in schematic menu "Components" ignored the rotation and mirroring of the symbols 2016-11-23: 33.2.0.9: Roll out of edition TARGET 3001! MID (Molded Interconnect Device) 2016-11-15: 33.2.0.9: Document name for PDF printers: "_SCH" is appended for a schematic, "_PCB" for a PCB 2016-11-13: 33.2.0.9: XGerber output: A distinct file extension can be assigned to milling layers (default: *.Mill) 2016-10-25: 33.2.0.9: Dialog "Rectangle of 4 lines" also works with relative coordinates 2016-10-18: 33.2.0.9: Export into the DB of a completly new package with STEP model lost this model 2016-10-17: 33.2.0.9: Vias in exposed pads in SMD packages were erroneously counted as real pads 2016-10-13: 33.2.0.9: Decoupled layer for dimensioning from normal drawing layer. Introduced project variable "DIMENSIONING_LAYER" 2016-10-07: 33.2.0.9: Track selected: Status line also shows the width of the tracks (if uniform) 2016-10-06: 33.2.0.9: Package dialog: With [Exchange package] initially the already used package is selected in the list 2016-10-06: 33.2.0.9: Rename user-defined layer functions easily 2016-10-03: 33.2.0.9: Bill-Of-Material: SMDs and THTs can be aoutput separately 2016-09-30: 33.2.0.9: Menu "Settings" poins "Project signals" and "Project components" multi-column 2016-09-27: 33.2.0.9: Ground plane assistant: Continuous connection of THTs, SMDs and vias (instead of pads and vias only) 2016-09-27: 33.2.0.9: Improved the opload to and the download from the COMPONIVERSE 2016-09-22: 33.2.0.9: Dragging the end of a bridge only dragged the via, not the bridge itself 2016-09-21: 33.2.0.9: Print sharp black/white: Lettered rectangles were completely black 2016-09-20: 33.2.0.9: Added button [One question...] in several dialogs for user questions 2016-09-01: 33.2.0.9: CONRAD component order: Ordernumbers with the entry are determined properly 2016-08-31: 33.2.0.9: XGerber, rounded rectangular pads, soldermask-plus: Roundings in the soldermask sometimes too small 2016-08-25: 33.2.0.9: Place tracks: Magnetic snap-on-pad markers cannot get smaller than 20x20 pixels 2016-08-25: 33.2.0.9: Dragging of elements in der Silkscreen could sometimes also drag copper tracks 2016-08-24: 33.2.0.9: X-Ray view: Texts, pads and vias show a little cross at their origin point 2016-08-24: 33.2.0.9: When zooming in or out whithout any mouse movement the cursor stays exactly on the same position 2016-08-23: 33.2.0.9: Improved output of triangles in XGerber 2016-08-22: 33.2.0.9: Settings(INI): Under "Display" there is a new entry "Size of error markers (PCB)" 2016-08-19: 33.2.0.9: Improved padstacks, if they do not appear on all copper layers: Display, X-Gerber, DRC 2016-08-16: 33.2.0.9: Improved output of texts in XGerber 2016-08-11: 33.2.0.9: Improved changing of "Right-aligned" with texts 2016-08-10: 33.2.0.9: Pick&Place: More than one user defined properties can be output: "Prop=MYPROP1","Prop=MYPROP2" 2016-08-09: 33.2.0.9: Edit selected pin names in a text editor: Improvement for right-aligned texts 2016-07-12: 33.2.0.9: Settings/Options: One-Pixel-Line can also be thicker (for HD monitors) 2016-07-11: 33.2.0.9: The reorganisation resetted mounting drill holes with padstack to layer 100 2016-07-10: 33.2.0.9: Measures: Define line width and color 2016-07-06: 33.2.0.9: DRC: Error "Island without REF" was reported erroneously under certain circumstances 2016-07-04: 33.2.0.9: Introduced "Plugged" and "Capped" for vias and pads (e.g. for thermal vias) 2016-06-30: 33.2.0.9: Pin names in schematic symbols can also have the signal name as text function (e.g. for a RS232 D-sub 9) 2016-06-22: 33.2.0.9: Improved handling in dialog "Rename Signal" 2016-06-13: 33.2.0.9: Polygonal pads: Increased visible resolution 2016-06-01: 33.2.0.9: Toolbar: Palette "Tracks". Programmed buttons also affect tracks that are still to be started 2016-05-10: 33.2.0.9: Symbol generator: Pin numbers also alphanumerical (A1, A2 ... B1 ...) 2016-05-10: 33.2.0.9: Inserted a search field in the settings dialog (object inspector) 2016-04-18: 33.2.0.9: The prefix in component names can also incluse cyphers 2016-04-18: 33.2.0.9: Maximum area naow 2m x 2m or 6.5ft x 6.5ft (experimental at first) 2016-04-13: 33.2.0.9: Print: Centering drills only: 1/3 of drill but never smaller than 0.3 mm and never bigger than 0.5 mm 2016-04-04: 33.2.0.9: Free Update: Always update all new files 2016-03-30: 33.2.0.9: Improved copying of the PCB as WMF vector graphic to the clipboard (for MS-Word and OpenOffice) 2016-03-26: 33.2.0.9: Double click M11 onto a line of an open rectangle: Change rectangle properties 2016-03-21: 33.2.0.9: Menu point "Insert text rectangle" in menu "Elements" (for text tags) 2016-03-17: 33.2.0.9: Menu point "Derive package from existing package" in toolbar "Edit package" 2016-03-17: 33.2.0.9: Menu point "Derive symbol from existing component" in toolbar "Edit component" 2016-03-17: 33.2.0.9: Menu point "Define open rectangle by coordinates" 2016-03-17: 33.2.0.9: Menu point "Create new packge" in menu "Packages" 2016-03-10: 33.2.0.9: Edit component symbols: The handle cross shows the symbol number and the symbol suffix 2016-03-10: 33.2.0.9: Edit component symbols: Moving pins to be owned by other symbols 2016-03-09: 33.2.0.9: Clipboard as GDI metafile (e.g. for MS Word or OpenOffice) did not work with OpenGL activated 2016-03-09: 33.2.0.9: Point "Create new component" in menu "Components" and in the component browser 2016-03-09: 33.2.0.9: Improved symbol generator 2016-02-28: 33.2.0.9: Memory leak found and repaired 2016-02-12: 33.2.0.9: Component database also works with MySQL 5.7 2016-02-11: 33.2.0.9: DRC: Improved spacing check for rounded rectangular pads with rather big drill holes 2016-02-10: 33.2.0.9: Clipboard: Improvement if two or more multiline texts are copied 2016-02-10: 33.2.0.9: Symbol dialog: Improved function of the button [Change value or type] 2016-02-10: 33.2.0.9: PCB outline assistant: Rectangular PCBs are recognized as rectangles (small black boxes) 2016-02-02: 33.2.0.9: XGerber import: Signal tracks on copper layers and free lines on other layers 2016-01-25: 33.2.0.9: Polygonal pads editor: Oblong drill hole is displayed 2016-01-25: 33.2.0.9: Polygonal pads editor: Excahanged mouseclicks M1 and M2 2016-01-21: 33.2.0.9: Improved export of projects to Eagle XML 2016-01-21: 33.2.0.9: Printing: Variant components with rectangles needed a very long time. Even in the preview 2016-01-20: 33.2.0.9: XGerber: Thermal snippets for thermal pads are minimally lengthened 2016-01-18: 33.2.0.9: Place pads: Phantom image of the pads is more precise (not always only oval) 2016-01-15: 33.2.0.9: IPC-D-356 also contains onboard resistors 2016-01-14: 33.2.0.9: Polygonal pads editor: Added a selection box for the size: 1 cm - 10 cm 2016-01-14: 33.2.0.9: Polygonal pads editor: Entire polygon can be moved 2016-01-14: 33.2.0.9: Hybrid autorouter: Improved connection of new tracks to manually prerouted tracks 2015-12-29: 33.2.0.9: Autoplacer: Component packages needed a REO to become visible 2015-12-23: 33.2.0.9: DRC: Sometimes error markers were placed on wrong positions 2015-12-22: 33.2.0.9: Ground planes: Triangles and rectangles touching each other in the area layer do not have an airwire any more 2015-12-22: 33.2.0.9: Improved catching coordinates with [+] for big layouts 2015-12-22: 33.2.0.9: REO: Very short airwires near pads are replaced by short tracks 2015-12-16: 33.2.0.9: DRC: Improved position of the error markers 2015-12-16: 33.2.0.9: DRC: Info dialog for error markers can be closed with [ESC] 2015-12-16: 33.2.0.9: DRC: Improved spacing check for tori (arcs) 2015-12-14: 33.2.0.9: Save projekt as template: Enter filename only, no path 2015-12-14: 33.2.0.9: Symbol dialog: [Change value or type]: Improved component replacement 2015-12-11: 33.2.0.9: Repaired: The V17 suddenly had huge delays with the P2P schematic autorouter (Bending mode) 2015-12-11: 33.2.0.9: The V17 Autoplacer was working incorrectly. Update and Reo resolves the problem in V17 and V18 2015-12-09: 33.2.0.9: Improved filling of closed polylines ("Fill open polygon", context menu of lines) 2015-12-09: 33.2.0.9: DRC: Improved spacing check for rectangular pads with rounded corners 2015-12-08: 33.2.0.9: Improved the connection of the snippets of thermal pads to converted ground planes 2015-12-05: 33.2.0.9: Added output format IPC-D-356 for testing adapters or flying probers 2015-12-02: 33.2.0.9: Internal connections in components are regarded for schematic airwires 2015-12-01: 33.2.0.9: BOM: "Also components without package" only exports components that have a proposed package 2015-12-01: 33.2.0.9: TARGET 3001! V17 stands still, the current version is now V18 2015-11-27: 33.2.0.9: Moving components: Sometimes signals were ripped off from their connected pins 2015-11-26: 33.2.0.9: Accelerated computation of airwires enormously using a heuristic 2015-11-26: 33.2.0.9: Accelerated computation of ground plane filling enormously 2015-11-26: 33.2.0.9: Ground plane filling also possible with triangles instead of lines 2015-11-23: 33.2.0.9: Block diagrams: Facilitated the ex-post creation for an existing schematic 2015-11-23: 33.2.0.9: PCB without Schematic: Improved handling of components with internal bridges 2015-11-22: 33.2.0.9: Snap-on-Pin/Pad when wiring signals now also works with keyboard keys [Return] and [2] 2015-11-22: 33.2.0.9: Inverted printing also on printers without RasterCaps 2015-11-17: 33.2.0.9: Schematic symbols show, if it is rotated and/or mirrored 2015-11-12: 33.2.0.9: Dimensioning: Number of decimals adjustable 2015-11-12: 33.2.0.9: Groundplane separation: Signal name of islands is assigned, if tracks or vias without an aura lie inside 2015-11-11: 33.2.0.9: BOM: Summarize components only if property field "COMPONENT_NAME" is identical too 2015-11-10: 33.2.0.9: Added the symbol generator 2015-11-10: 33.2.0.9: Dialog "Change lines": Length and Angle can be entered 2015-11-01: 33.2.0.9: Added toolbar "Edit component" easing the creation of component symbols 2015-10-13: 33.2.0.9: Select package from database: Search for names starts only 0.5 sec after the last key press 2015-10-01: 33.2.0.9: The Layer dialog sometimes took a long time to close 2015-09-28: 33.2.0.9: DXF import: Arcs with their center outside of +/-60 cm are converted to chords 2015-09-24: 33.2.0.9: Printing: New button [Rel.]: Relative origin of the circuit gets left lower corner of the printed image 2015-09-21: 33.2.0.9: Improved lenght information with extremely long signals 2015-09-15: 33.2.0.9: GDI: "Canvas does not allow drawing" could appear after long usage 2015-09-09: 33.2.0.9: Layer dialog: Added a checkbox "Mix colors" bottom right 2015-08-08: 33.2.0.9: The orange activity panel in the screen center is now only on top of the TARGET windows, not on top of all others 2015-08-04: 33.2.0.9: OpenGL: Anti aliasing can be switimched off 2015-08-03: 33.2.0.9: Gate swap: Pin names may have the suffix of their symbol: OutA <-> OutB 2015-07-28: 33.2.0.9: Improved the computation of the text length of TrueType fonts 2015-07-28: 33.2.0.9: Improved pin ordering according to a processor scheme for multifunctional pins: RB7/ASCL1/PMCS2/RPI74 2015-07-21: 33.2.0.9: Improved the dragging of connected traces when moving or rotating elements 2015-07-14: 33.2.0.9: "Change symbol" dialog: New button [Change value or type] sometimes lost the pin names 2015-07-14: 33.2.0.9: Connecting to a signal trace with an appended signal name, the signal name sometimes was rotated by 45° 2015-07-14: 33.2.0.9: Sometimes big and unused STEP or STL data was stored in project files 2015-07-14: 33.2.0.9: Autosave does not wait for the next click after a working pause, but saves X minutes after the first change 2015-07-09: 33.2.0.9: Projects from a NC licence sometimes "infected" other projects with NC 2015-07-09: 33.2.0.9: Zooming out: Sometimes parts of the circuit were left out 2015-07-09: 33.2.0.9: DXF import filter can read splines (NURBS) 2015-06-25: 33.2.0.9: Improved OpenGL view in schematic and layout 2015-06-25: 33.2.0.9: Place PCB tracks: The coloured mouse cursor was displayed incorrectly on several computers 2015-06-24: 33.2.0.9: Oblong holes in pads can be nibbled when output with Excellon 2015-06-22: 33.2.0.9: "Change package" dialog: New button [Replace package] to change the package (e.g. DIL => SMD) 2015-06-22: 33.2.0.9: "Change symbol" dialog: New button [Change value or type] to replace the component 2015-06-16: 33.2.0.9: GenCAD output: Under certain circumstances some packages (Shapes) were left out 2015-06-15: 33.2.0.9: XGerber output: Improved fiducial 2/4 (centering mark) 2015-06-12: 33.2.0.9: Menu Package / Replace or update package: Position and Size of component name and value can be kept 2015-06-08: 33.2.0.9: Delete Ref component and Undo: Red pin remained invisible 2015-06-06: 33.2.0.9: Pick&Place checkbox: Only export the first PCB if a panelization was performed 2015-06-02: 33.2.0.9: Import DXF: Improved bulges in POLYLINE and LWPOLYLINE 2015-05-26: 33.2.0.9: Several overlapping schematic pins of a component display their pin numbers separated with commas 2015-05-25: 33.2.0.9: Clipboard: Bitmap image can be imported in schematic and PCB directly 2015-05-20: 33.2.0.9: Package elements on inner layers appear on the respective inner layer after import from the component database 2015-05-20: 33.2.0.9: Sometimes nodes were not set during signal placement (T-junction) 2015-05-20: 33.2.0.9: DXF Output: TrueType chars can be hatched or can be unfilled 2015-05-18: 33.2.0.9: XGerber output: Improved output of circlic fiducial marks 2015-05-11: 33.2.0.9: XGerber output: Numbering of copper layers top-down can be switched off (= bottom-up) in "Settings (INI)" 2015-05-11: 33.2.0.9: Drills for Padstacks were not always exportet with the new version 2015-05-08: 33.2.0.9: Rectangle, Triangle, Circle: The working mode remains active after dragging with mouseclick M1H 2015-05-07: 33.2.0.9: XGerber output: Reversed numbering of copper layers: L1 = top, L2, L3... = inner layers, counted top-down, Ln = bottom 2015-05-06: 33.2.0.9: Converting ground planes into lines: Padstacks: Additions for deletion layers were used in a wrong way 2015-05-04: 33.2.0.9: Print "sharp black/white" using scripts: Tracks wer printed with minimal blackness only 2015-05-02: 33.2.0.9: Oblong holes as "drill holes" in pads available 2015-05-02: 33.2.0.9: OpenGL: Pads on layer 100 were displayed too dark when color mixing (blending) is active 2015-04-29: 33.2.0.9: "Push onto the grid" works with symbols now also during creation/editing 2015-04-29: 33.2.0.9: Padstack in ground plane: Aura + addition in layer without copper gives aura + addition as isolation around the drill hole 2015-04-27: 33.2.0.9: The multiplication by 10 for the grid must be switched on extra 2015-04-22: 33.2.0.9: The color of the error markers in schematic view is adjustable using the color dialog 2015-04-17: 33.2.0.9: The autoplacer can also place the components sorted by component name 2015-04-16: 33.2.0.9: The spacing of the displayed grid is multiplied by 10 from a certain zoom step 2015-04-13: 33.2.0.9: Symbol assistant: Standard script for normal ICs 1,2,3,4,... and BGAs A1,A2,A3,...B1,B2,... 2015-04-04: 33.2.0.9: OpenGL as rendering engine with hardware acceleration: Settings(INI), experimental 2015-04-03: 33.2.0.9: GenCAD: Selectable coordinates unit (inch, mil, mm) 2015-03-23: 33.2.0.9: GenCAD: Improved the output for components on the bottom side 2015-03-06: 33.2.0.9: DRC: The closed error list can be reopened without checking anew 2015-02-27: 33.2.0.9: Tori can also have non-rounded ends 2015-02-23: 33.2.0.9: Bill of material: Component property "BILL_OF_MATERIAL=YES" forces a component to be listed 2015-02-19: 33.2.0.9: BOM output also regarding moduls 2015-02-13: 33.2.0.9: Different colors for grid lines and grid points 2015-02-05: 33.2.0.9: Selecting a signal or component also fills the search field (topmost in the sidebar) 2015-02-04: 33.2.0.9: When deleting signal segments in schematic, sometimes needless junctions were not deleted 2015-02-03: 33.2.0.9: Impoved auras for non rounded tracks and rectangles. Also for converting ground planes to lines 2015-01-23: 33.2.0.9: Deleting a package did not remove entry "USED_PACKAGE" from the component (reg. BOM) 2015-01-19: 33.2.0.9: Package export dialog: Size of dialog can be changed and is remembered 2015-01-14: 33.2.0.9: Isolation milling: Insert arbitrary commandlines after a tool change 2014-12-20: 33.2.0.9: Improved PCB-POOL calculator 2014-12-18: 33.2.0.9: Improved handling with "Differential Pairs" 2014-11-30: 33.2.0.9: Reference symbol: Text function "Signal pages" didn't always work correctly when copying REFs 2014-11-30: 33.2.0.9: Zoom with MouseWheel: Under Linux sometimes the zoom worked only backwards 2014-11-27: 33.2.0.9: GenCAD + FabMaster: Signals made of only one single track segment were not exported unter certain circumstances 2014-11-24: 33.2.0.9: Copy once and then paste several times remembers rotation and mirroring 2014-11-24: 33.2.0.9: Introduced text function "Component usage" for the component property "COMPONENT_USAGE" 2014-11-24: 33.2.0.9: HPGL: CR after each command 2014-11-23: 33.2.0.9: Message "Rip signal off?" appeared two times 2014-11-23: 33.2.0.9: Search with switching of the schematic page didn't always zoom in the elements found 2014-11-23: 33.2.0.9: Create BGA pins: Schematic menu "Components / Special functions / Create pins for BGAs..." 2014-11-21: 33.2.0.9: Pad and via dialog: Programmable buttons on the right also save field "No aura for these layers" 2014-11-20: 33.2.0.9: Selecting with M1, editing with M11 and zoom with the mousewheel ignore the grid; the actual mouse position counts 2014-11-20: 33.2.0.9: Collinear segments were sometimes combined, even though a pad lay on the "bend" 2014-11-19: 33.2.0.9: Check: "Second REF needed", if a REF has the Property "NEED_2ND_REF=True" 2014-11-19: 33.2.0.9: Scale: Button [100%] also centers the image 2014-11-05: 33.2.0.9: Pick&Place: Introduced component properties REEL_ORIENTATION, REEL_OFFSET_X and REEL_OFFSET_Y 2014-11-03: 33.2.0.9: Eagle import: Polygons with bulges 2014-10-15: 33.2.0.9: Pick&Place: Improved output line 2014-10-15: 33.2.0.9: Improved XGerber output for padstacks with additions in deletion layers 2014-10-13: 33.2.0.9: Eigenschaften-Dialog: Einträge können alphanumerisch sortiert werden 2014-10-01: 33.2.0.9: Imroved Eagle import regarding ground planes 2014-10-01: 33.2.0.9: Implemented STEP import for 3D models of the components. In TARGET, database and COMPONIVERSE 2014-09-26: 33.2.0.9: Teardrops: TARGET regards pad stacks with different additions on several layers 2014-09-12: 33.2.0.9: Renaming a component prefix did not always register the new prefix in the project 2014-09-08: 33.2.0.9: TIFF output: With "sharp black-white" the field "copper blackness" [%] was ignored 2014-08-11: 33.2.0.9: Improved the context menus of the small black boxes of lines and rectangles 2014-08-01: 33.2.0.9: Package generator: Debug now with the possibility to set variables manually 2014-07-29: 33.2.0.9: TIFF output now also knows #Q for the variant's revision 2014-07-29: 33.2.0.9: TIFF output with variable file path can now also create new subfolders 2014-07-29: 33.2.0.9: BOM also as Excel XLSX format possible 2014-07-23: 33.2.0.9: BOM also as Excel XML format possible 2014-07-21: 33.2.0.9: Improved isolation milling, if groundplanes were already converted into lines 2014-07-18: 33.2.0.9: Improved spiral tracks, aura as fixed spacing. Also inner and outer spirals possible 2014-07-17: 33.2.0.9: Polygonal pads: Editor has now 50 steps Undo with [Backspace] or [Ctrl]+[z] 2014-07-14: 33.2.0.9: Excel BOM: User is asked, whether fields with more than 255 chars shall be cut 2014-07-03: 33.2.0.9: Search order numbers: Under certain circumstances the new ordernumbers were not saved 2014-06-27: 33.2.0.9: Panelisation: X and Y spacing can be differnet 2014-06-25: 33.2.0.9: Little black box also in the middle of lines, tori and splines 2014-06-25: 33.2.0.9: 8 little black boxes for closed rectangles and new open rectangles 2014-06-24: 33.2.0.9: Bound key [p] for pan (panorama) to the middle mouse button M3 2014-06-14: 33.2.0.9: Download of COMPONIVERSE components that have been selected ther as logged-in user 2014-06-12: 33.2.0.9: Snapping on existing element coordinates with key [+] creates a new mouse-reachable "grid point" 2014-06-11: 33.2.0.9: Pick&Place: One user defined property can also be output: "Prop=MYPROP" 2014-06-11: 33.2.0.9: Meanders regard mounting drills without copper 2014-06-05: 33.2.0.9: Added a swift search function for ordernumbers into the component management 2014-06-05: 33.2.0.9: Implemented "COMPONIVERSE" as sharing platform for components 2014-06-04: 33.2.0.9: Impedance calculator for Strip Lines and Micro Strips (RF) 2014-06-04: 33.2.0.9: Meandering of tracks (RF) 2014-06-04: 33.2.0.9: New DXF import with blocks and coordinates calibration 2014-06-04: 33.2.0.9: Pin ordering according to a processor scheme 2014-06-04: 33.2.0.9: Differential pairs (RF) 2014-06-04: 33.2.0.9: Package generator 2014-06-04: 33.2.0.9: TARGET 3001! V16 stands still, the current version is now V17 2014-05-23: 33.2.0.9: Improved the continuation of differential pairs that had aleady been started 2014-05-21: 33.2.0.9: Saving a new project: The user directory is proposed as location 2014-05-21: 33.2.0.9: TIFF paper format is saved in the INI file 2014-05-19: 33.2.0.9: Improved collapsing the sidebar 2014-05-15: 33.2.0.9: Track and then via with [.]: A track width manually set with [o] is remembered 2014-05-13: 33.2.0.9: Automatic dimensioning of the PCB: If available, the relative origin is used for the coordinates 2014-05-13: 33.2.0.9: Menü "File / In-Output / Testadapter": Write test points to text file 2014-05-12: 33.2.0.9: Preview on V17: New DXF import with blocks and coordinates calibration 2014-04-30: 33.2.0.9: Package import: Every element in a copper layer gets an aura, not the pads only 2014-04-27: 33.2.0.9: Pick&Place: Improved the handling for deriving the package reference point 2014-04-27: 33.2.0.9: XGerber-In: An Excellon file read into a layer "Other" result in filled circles, not in drills 2014-04-27: 33.2.0.9: Place tracks: Mouse cursor shows color of the active copper layer 2014-04-26: 33.2.0.9: Scaled the TARGET program icon up to 256 x 256 pixels 2014-04-19: 33.2.0.9: Convert ground plane to lines: Layer 0 was switched visible unintentionally 2014-04-16: 33.2.0.9: XGerber: The aura of polygonal pads was output too big under certain circumstances 2014-04-09: 33.2.0.9: #R in print sripts didn't work always 2014-04-09: 33.2.0.9: PCB automatically starts with unit "mil" instead of "mm": Only with Windows country = USA 2014-04-03: 33.2.0.9: Improved menu point "Components / Replace components..." 2014-03-20: 33.2.0.9: Edit package dialog: Buttons to hide and show component name and value in the package 2014-03-20: 33.2.0.9: Edit symbol dialog: Buttons to hide and show component name and value in the symbol 2014-03-14: 33.2.0.9: Using Padstacks: Moving schematic elements sometimes dragged elements on other schematic pages 2014-03-13: 33.2.0.9: PDF output with scripts and FreePDF-XP: FreePDF dialogs are remote-controlled 2014-03-08: 33.2.0.9: A new front panel always starts with unit mm (not mil), even with Englisch language chosen 2014-03-05: 33.2.0.9: Pad stacks: Extra addition for copper layers also increases the size of the deletion in ground planes (aura) 2014-02-26: 33.2.0.9: Measuring (dimensioning): Text font can be set 2014-02-20: 33.2.0.9: Component search: The parameters of a component are displayed directly underneath the search result 2014-02-19: 33.2.0.9: Changed Calculators to SEPA 2014-02-13: 33.2.0.9: WITH "Omit 3D output" (NO3D=TRUE) the silkscreen of the package is shown on the PCB nevertheless 2014-02-13: 33.2.0.9: Added checkbox "Omit 3D output" in package dialog 2014-02-12: 33.2.0.9: Update user defined properties: Can work with components that are not identified exactly 2014-02-11: 33.2.0.9: Introduced a text editor for "pinnames only" into the symbol assistant 2014-02-10: 33.2.0.9: Selection assistant: Improved selection of symbols in the 2014-02-06: 33.2.0.9: Selection assistant: Can also distinguish components regarding the PCB variants now 2014-02-05: 33.2.0.9: Printing scripts: Replacement in file name: #N instead of $N$ etc. 2014-02-03: 33.2.0.9: Select-more-and-more with M1 can be turned off (s. 05.12.2013) 2014-01-30: 33.2.0.9: Teardrops: Improved automatic removing 2014-01-28: 33.2.0.9: 3D editor: Dialogs for the different primitives with double click (M11) onto text line 2014-01-28: 33.2.0.9: 3D editor: Added Buttons for the different primitives: New solid, cylinder, arc, text ... 2014-01-20: 33.2.0.9: MySQL DLL was not found at times 2014-01-17: 33.2.0.9: 3D syntax editable easier: Dialogs for double-click on 3D line 2014-01-17: 33.2.0.9: Moved list of open document windows from menu "File" to menu "Window" 2014-01-16: 33.2.0.9: Acceleration of the signal handling in big projects 2014-01-15: 33.2.0.9: Alignment assistent radial: 10 parts from 0°...360°: The last is placed at 324° instead of 360° 2014-01-15: 33.2.0.9: PCB-POOL Calculator: Single-sided PCBs also as "series XXS" 2014-01-15: 33.2.0.9: PCB-POOL Calculator: Single-sided PCBs also as IMS with aluminium core 2014-01-14: 33.2.0.9: Preview on V17: Pin ordering according to a processor scheme 2014-01-14: 33.2.0.9: Preview on V17: Differential pairs 2014-01-04: 33.2.0.9: Menu point schematic/components: Edit selected pin names in a text editor 2014-01-04: 33.2.0.9: 3D arcs, cylinders and spheres are displayed smoother 2014-01-04: 33.2.0.9: Preview on V17: Package generator 2014-01-04: 33.2.0.9: Greek omega possible as Ohm sign in texts in many different fonts 2013-12-20: 33.2.0.9: Mounting holes in packages can have signals, even without pin number 2013-12-14: 33.2.0.9: Editor "Polygonal pads": Context menu on a node: Chamfer corner + round corner 2013-12-10: 33.2.0.9: Pick&Place: Revision of the current variant can be written 2013-12-10: 33.2.0.9: BOM: Revision of the current variant can be written 2013-12-10: 33.2.0.9: Printing scripts: New variables in filenames: $V$ for variant and $R$ for revision 2013-12-10: 33.2.0.9: Printing scripts: File path can be set for PDF printer "FreePDF XP" 2013-12-10: 33.2.0.9: 3D syntax: Cylinder can be rounded 2013-12-05: 33.2.0.9: Select signal segment with M1 and click it again: Extend the selection scope: Single -> Branch -> Island -> Signal 2013-11-26: 33.2.0.9: XGerber import: Rectangular apertures possible with rectangular draw commands (D01 not only with round apertures) 2013-11-25: 33.2.0.9: Component database: New SQLite3.dll up to 3 times faster 2013-11-21: 33.2.0.9: "Produce PCB as 3D dummy" in menu "File" 2013-11-20: 33.2.0.9: Printing scripts: The last script used is automatically saved in the project file 2013-11-20: 33.2.0.9: Printing scripts: During a script one can toggle now between schematic and PCB 2013-11-19: 33.2.0.9: Calculation of airwires: Sometimes a part of the airwire was suppressed 2013-11-15: 33.2.0.9: 3D STEP Export also fully colored 2013-11-15: 33.2.0.9: DRC: Package overlap: Curves in package drawing are regarded 2013-11-13: 33.2.0.9: Moving components in the schematic: Autorouter can be turned off (Settings / INI) 2013-11-13: 33.2.0.9: Moving components in the schematic: Autorouting doesn't create loops any more 2013-11-04: 33.2.0.9: Implemented image gallery in component browser 2013-10-17: 33.2.0.9: Select nothing (Unselect, Deselect) with [Esc] in pointer-mode 2013-10-04: 33.2.0.9: Improved moving and dragging of ends of very short track segments 2013-09-26: 33.2.0.9: XGerber Import: Import of external aperture tables: Improved proceeding; save a TARGET apterture file 2013-09-26: 33.2.0.9: Moving components in the schematic: Improved autorouting 2013-09-20: 33.2.0.9: Improved "Assign symbol" (for free packages without symbol) 2013-09-20: 33.2.0.9: Improved Eagle XML import, libraries and projects 2013-09-18: 33.2.0.9: Excellon: Padstacks from copper bottom to copper top are also exported into an extra file, if desired 2013-09-03: 33.2.0.9: Measure and text also with M1h; close polygon also with M2 2013-09-03: 33.2.0.9: [ESC] closes all 3 autorouters 2013-08-28: 33.2.0.9: Improved "Redo" 2013-08-28: 33.2.0.9: Moving components in the schematic: Connected traces are routed 2013-08-21: 33.2.0.9: Implemented 2 switchable messages for Vias by [.] and flipping packages by mirroring 2013-08-20: 33.2.0.9: Implemented a switchable message regarding the checkboxes in front of properties in change dialoges 2013-08-19: 33.2.0.9: Implemented 3 switchable messages for X-ray-mode, for selecting single elements and for the rotation center 2013-08-19: 33.2.0.9: Bitmap as component: Also colored BMPs, TIFs, GIFs, PNGs and JPGs can be used 2013-08-07: 33.2.0.9: Viewer: Improved cross probe with signals from PCB view back to schematic view 2013-08-06: 33.2.0.9: Blue busses always cover the green signal lines, gray symbol drawings always cover the red pins 2013-08-01: 33.2.0.9: Instead of zooming: The mouse wheel scrolls vertically with [Ctrl] and horizontally with [Shift] 2013-07-15: 33.2.0.9: Tori of teardrops do not count for the signal length shown in the status bar 2013-07-10: 33.2.0.9: Key [Alt] sometimes deleted several buttons and texts in dialogs 2013-07-06: 33.2.0.9: Improved DXF import: POLYLINE can also include arcs (bulges) 2013-07-04: 33.2.0.9: Plated-through pads and vias can be covered with solder paste too, if wanted 2013-06-28: 33.2.0.9: Bridge connections now also work with Padstacks 2013-06-20: 33.2.0.9: Introduced the 3D output format *.OBJ (Wavefront Technologies) 2013-06-17: 33.2.0.9: Reo sometimes deleted tracks from teardrops 2013-06-11: 33.2.0.9: Convert projekt into "PCB without schematic": The component values can be erased too 2013-06-10: 33.2.0.9: Bill of material: New checkbox: Also components without package can be listed 2013-06-10: 33.2.0.9: Isolation milling: Increased overlap for rub-out from 2/100 mm to 5/100 mm 2013-06-06: 33.2.0.9: Areas in ground layers can be divided by lines in deletion layers and can thus have different signals 2013-05-29: 33.2.0.9: Property dialog: Position and size are adjustable and remembered during the session 2013-05-28: 33.2.0.9: STEP export: Sometimes parts of tracks were missing 2013-05-28: 33.2.0.9: XGerber: Text with TrueTypeFont sometimes was not converted correctly 2013-05-18: 33.2.0.9: Improved DRC regarding spacing violations 2013-05-17: 33.2.0.9: Setting "Outlines only" (X-ray mode) is no longer saved in the INI file 2013-05-16: 33.2.0.9: "Trimming of lines and tori" works with more than two selected elements 2013-05-16: 33.2.0.9: Problems could occur with texts in several languages (EN,FR,GE). Start Reo once 2013-05-03: 33.2.0.9: XGerber created self-intersecting polygons for texts in several fonts 2013-04-29: 33.2.0.9: XGerber: Italic fonts were output non-italic in some cases 2013-04-23: 33.2.0.9: Polygonal pads: Mirroring (with or witout flipping) sometimes rotated the direction of the pads 2013-04-21: 33.2.0.9: XGerber: Proposal for output into a subdirectory of the project's directory (for new projects) 2013-04-18: 33.2.0.9: Bill of material BOM: Property "Package is SMD" selectable (sometimes project REO necessary first) 2013-04-17: 33.2.0.9: Pad dialog: Solder paste can be reduced by 5% up to 25% 2013-04-12: 33.2.0.9: Place a new and selected symbol with [F3] in layout view 2013-04-12: 33.2.0.9: Mirroring components with texts in schematic view: Text property "Align right" is handled correctly 2013-03-22: 33.2.0.9: 3D view: Under certain circumstances teardrops were not displayed correctly 2013-03-20: 33.2.0.9: Pick&Place: With several PCBs in one project a single PCB can be selected 2013-03-01: 33.2.0.9: Chenge package: Group package pins as "internally connected" (cluster) 2013-02-26: 33.2.0.9: Improved and accelerated the import of projects from before V15 2013-02-26: 33.2.0.9: Polygonal pads: Improved computation of the pad's rest ring during DRC 2013-02-26: 33.2.0.9: Polygonal pads: Improved computation of spacing during DRC 2013-02-22: 33.2.0.9: 3D view: Sometimes the inner copper layers were not drawn 2013-02-13: 33.2.0.9: Introduced minimal width and minimal spacing in layer dialog 2013-02-06: 33.2.0.9: Dialog "Import package for": Component selection box scrolls to the last recently used line 2013-02-05: 33.2.0.9: Polygonal pads in 3D view 2013-02-05: 33.2.0.9: 3D view: Position and size of the window are kept during the session 2013-02-05: 33.2.0.9: 3D editor: [Ctrl] + [s] saves 2013-01-31: 33.2.0.9: Polygonal pads: Introduced a function for automatic arcs (arcs made of chords) 2013-01-21: 33.2.0.9: Set dialog "Import database" to an initial height of 800 pixels (was too high for some monitors before) 2013-01-17: 33.2.0.9: Menu "File / Close project": This menu point sometimes caused a program crash 2013-01-14: 33.2.0.9: [Shift] + [Ctrl] + M1: Select single elements of components (additionally), even if "components always completely" is set 2013-01-14: 33.2.0.9: [Shift] + M1 or [Ctrl] + M1: Select elements or components additionally (s. 07.03.2009) 2013-01-04: 33.2.0.9: Dual-Screen: Also works with more than 2 monitors in line 2013-01-04: 33.2.0.9: Dual screen: Schematic window can also be displayed on the right side 2013-01-04: 33.2.0.9: Polygonal pads also available in CXF 2013-01-04: 33.2.0.9: Improved CXF import and export 2012-12-18: 33.2.0.9: If TARGET was launched erroneousely: A prompt [ESC] stops TARGET 2012-12-17: 33.2.0.9: Component database and settings were not always inherited correctly from predecessor versions 2012-12-14: 33.2.0.9: Single airwires were not displayed in seldom cases 2012-12-14: 33.2.0.9: Vias and pads often were created octagonal erroneously 2012-12-11: 33.2.0.9: Improved dual screen behavior 2012-12-11: 33.2.0.9: Cross highlighting: Invisible parts are shown (page, layer, zoom/pan) 2012-12-09: 33.2.0.9: Cross probe [F3] towards the schematic: Component or signal on several pages cause a selection dialog 2012-12-08: 33.2.0.9: Polygonal pads: Improved DXF output 2012-12-08: 33.2.0.9: Polygonal pads: Improved PostScript output 2012-12-07: 33.2.0.9: Move a package: Recompute only the airwires of the affected signals 2012-12-06: 33.2.0.9: Launch of the selection assistant: Acceleration, if there are ground planes converted into lines 2012-12-06: 33.2.0.9: Polygonal pads: Use clipoboard with text format 2012-12-06: 33.2.0.9: Inserted standard pad forms in polygon editor 2012-12-05: 33.2.0.9: Exporting a symbol with [x] without preceding [y]: Removed wrong Message "Double pin numbers" 2012-12-05: 33.2.0.9: Polygonal pads may have an aura 2012-12-03: 33.2.0.9: Polygonal pads possible. Polygon editor included 2012-12-01: 33.2.0.9: Reference symbol: The symbol can list the pages where the respective signal is also used 2012-11-27: 33.2.0.9: Extremely accelerated the computation of complex airwires 2012-11-25: 33.2.0.9: Computation of the airwire takes too long: Dialog for cancelation appeared 3 times 2012-11-25: 33.2.0.9: Accellerated by a factor 10: Check whether a signal's routing is complete 2012-11-23: 33.2.0.9: Ground planes: Converting into lines sometimes caused wrong airwires 2012-11-21: 33.2.0.9: Front panels: Double sided treatment possible 2012-11-21: 33.2.0.9: Printing: The visible layers can be selected in the printing dialog 2012-11-21: 33.2.0.9: Several pads in a package can better be connected internally in a conductive way 2012-11-21: 33.2.0.9: Menu File / Input-Output / Data exchange: Export drill list 2012-11-21: 33.2.0.9: Cross highlighting (schematic - PCB) 2012-11-21: 33.2.0.9: Export single symbol to database: Odd free elements are added to the symbol 2012-11-21: 33.2.0.9: Created first V16 2012-10-31: 33.2.0.9: MySQL component database: Improved performance 2012-10-31: 33.2.0.9: MySQL component database: BLOBs > 64kB were truncated sometimes 2012-10-19: 33.2.0.9: Moving tracks sometimes showed a message "Rip component up?" 2012-10-18: 33.2.0.9: Assembly PCB-POOL: Adjusted calculation of the delivery times 2012-10-12: 33.2.0.9: Eagle XML import: Unused copper layers are set to function "Other" 2012-10-12: 33.2.0.9: MySQL migration was not executed, if packages had extrem big blobs (>97kB) 2012-10-11: 33.2.0.9: Pick&Place: Fiducials were not always enumerated 2012-10-10: 33.2.0.9: MySQL Datbase Server: Online update now possible 2012-09-26: 33.2.0.9: Pick&Place: Berechnung der Bauteilmitte alternativ: Lötpunkte, Gehäuse-Linien oder Griffkreuz 2012-09-26: 33.2.0.9: Pick&Place: Computation of components centers uses pad outlines instead of using only their centers 2012-09-24: 33.2.0.9: Improved the loading of V14 projects 2012-09-14: 33.2.0.9: Convert GND planes to lines: Padstacks with extra additions on deletion layers were not always regarded correctly 2012-09-14: 33.2.0.9: Via dialog: Edit padstack selects directly the padstack used 2012-09-14: 33.2.0.9: Convert GND planes to lines: Holes in the planes were sometime too small 2012-09-12: 33.2.0.9: DXF output: Sometimes square pads were drawn as round 2012-09-04: 33.2.0.9: Design check: Component younger: Introduced 1 minute of grace, as entries in the database are rounded 2012-08-28: 33.2.0.9: The search dialog and the selection assistant can search for signal classes too 2012-08-15: 33.2.0.9: MySQL support for multiuser access to one shared component database 2012-08-14: 33.2.0.9: Package locked against movements: Name or value can be moved individually in spite of that 2012-08-06: 33.2.0.9: Front panel: Added Pressfit thread bolts and nuts 2012-08-02: 33.2.0.9: Sometimes TIFF files were not created 2012-08-02: 33.2.0.9: DXF import: Inserted checkbox "Position automatically" 2012-08-01: 33.2.0.9: Sometimes all component prefixes became "0": Database update in component browser necessary 2012-06-25: 33.2.0.9: Eagle XML libraries can be imported 2012-05-25: 33.2.0.9: TIFF output: #D can be used as a variable for the project file's directory 2012-05-05: 33.2.0.9: PCB: Menu Actions: Center component names and values over package handles 2012-05-05: 33.2.0.9: PCBout: XGerber output stores the destination directory and the checked layers in the project file 2012-05-05: 33.2.0.9: Groundplane assistant: Dialog doesn't close after every action 2012-05-05: 33.2.0.9: Schematic: Menu Actions: Center component names and values over symbol handles 2012-05-05: 33.2.0.9: BOMs: Universal scripts can now control the output 2012-05-02: 33.2.0.9: Printing scripts: "Variant=Clear" resets all variants 2012-04-19: 33.2.0.9: Only the banner ads themselves are click sensitive 2012-04-12: 33.2.0.9: Dimensioning with selection of the layer and font Arial 2012-04-12: 33.2.0.9: Hybrid-Router sometimes didn't work 2012-04-05: 33.2.0.9: Import of Eagle XML projekts 2012-04-05: 33.2.0.9: Component browser: Possibility to import exported databases 2012-04-03: 33.2.0.9: Printing: Universal scripts can now control the printing 2012-04-02: 33.2.0.9: Program update now using special Updater.exe with UAC (User Access Control) 2012-04-01: 33.2.0.9: DXF import: Any layer can be chosen as import layer in PCB view 2012-04-01: 33.2.0.9: DXF import: OffsetX and OffsetY are regarded in every case 2012-03-31: 33.2.0.9: Pick&Place: Dialog recalls all settings 2012-03-30: 33.2.0.9: Settings / Options: Show signal names (Schematic) displays those also for pins 2012-03-23: 33.2.0.9: Sidebar PCB: After Drag&Drop from the component list below, the cursor steps to the next component of the list 2012-03-12: 33.2.0.9: Featured all EXE programs and installer with a digital signature 2012-03-12: 33.2.0.9: Mirrored texts on the bottom side of the PCB rotates according to the standard (readable from the right side) 2012-03-02: 33.2.0.9: Selection assistant racalls it's settings during program run 2012-03-01: 33.2.0.9: Change texts: Change only X- or(!) Y-coordinate for several selected texts 2012-02-29: 33.2.0.9: Autoplacer did not place all possible components under certain circumstances 2012-02-15: 33.2.0.9: Design check: Addes checkbox for "Ground is not converted into lines" 2012-02-15: 33.2.0.9: Design check: Added checkbox "REF without name" 2012-02-13: 33.2.0.9: Isolation milling: Rubout ignored the entry "no aura for layer X" with pads 2012-02-13: 33.2.0.9: Improvement of the handling of user layer functions in the component database 2012-02-08: 33.2.0.9: Importing rest symbols of a component: The symbols's component was not set properly 2012-02-05: 33.2.0.9: Alternative grid, toggle with [Shift]+[F6] 2012-02-01: 33.2.0.9: Pad: Property "These layers have no aura" are also adjusted when mirroring or shifting layers 2012-01-30: 33.2.0.9: Info dialog (ToDo list / project logbook): Size of window variable 2012-01-26: 33.2.0.9: Settings: Active layer always on top: Show always drillholes and pad numbers 2012-01-25: 33.2.0.9: Drill plan (as pictogramms) can also be exported as DXF 2012-01-25: 33.2.0.9: Isolation milling: PCB outline: Output of huge arcs: Chord length max. 1 mm 2012-01-24: 33.2.0.9: Improved displacement: Sometimes ends of lines were drawn along twice as far 2012-01-20: 33.2.0.9: Improved installation under Win 7 2012-01-18: 33.2.0.9: Improved handling of signal classes for new signals 2012-01-18: 33.2.0.9: Front panel calculator: The price for laser engraving on black alu was too high 2012-01-04: 33.2.0.9: DRC: Warning if REF's name invisible and signal name is not "GND" 2012-01-02: 33.2.0.9: Deletion of schematic pages (using the sidebar) did not work in all cases 2012-01-02: 33.2.0.9: Renaming padstacks did not work in all cases 2011-12-29: 33.2.0.9: Isolation milling: Improved output EMC2: Coordinates, comments, file extension *.ngc 2011-12-28: 33.2.0.9: Texts can be oriented "align right" 2011-12-23: 33.2.0.9: Front panel designer: New materials: Alu raw, alu chromated, FR4 and acryl glass red transparent 2011-12-19: 33.2.0.9: Datasbase directory was torn in several cases 2011-12-08: 33.2.0.9: Improved printing of several schematic pages and introduced button [all] 2011-12-06: 33.2.0.9: Replace component in schematic: Improved recognition of rotation angle 2011-11-25: 33.2.0.9: Front panel: D breakout also double sided 2011-11-22: 33.2.0.9: Introduced revision nummbers for variants 2011-11-20: 33.2.0.9: Introduced signal classes 2011-11-14: 33.2.0.9: Changed visual appearance of toolbars 2011-11-09: 33.2.0.9: PCM menu "Elements": Via without track: Place via only, do not continue with a track. Key [,] 2011-11-07: 33.2.0.9: Input/output, Data exchange: Convert bitmap directly to database component 2011-11-03: 33.2.0.9: XGerber: Component names and values on extra layers can be integrated into one Gerber file 2011-11-01: 33.2.0.9: Selection assistant: Added properties "Package needed" and "Package placed" 2011-10-29: 33.2.0.9: Rectangle in ground layer (e.g. layer 0): Ask for ground signal, autom. adjust auras of the contained elements 2011-10-29: 33.2.0.9: Context menu at line ends: Unfilled polyline can automatically be filled (polyline to polygon) 2011-10-02: 33.2.0.9: Print PCB: Ground planes that are converted into lines can be hidden via a switch 2011-09-27: 33.2.0.9: Schematic: Automatic nodes (junctions) are also removed again automatically, if they become obsolete 2011-09-23: 33.2.0.9: Improved function "Drag" once again: Current copper layer is preferred 2011-09-22: 33.2.0.9: Opening the dialog "Edit symbol" could last a long time 2011-09-13: 33.2.0.9: Improved function "Drag" 2011-09-13: 33.2.0.9: Inserted "Derive variant" into menu "Settings / Project variants" 2011-09-06: 33.2.0.9: PCB-Pool front panel order: Fields for creditcard sometimes were shifted out of the dialog 2011-08-24: 33.2.0.9: Introduced user folder in start dialog 2011-08-23: 33.2.0.9: DRC: New Message: Ground plane not converted into lines 2011-08-20: 33.2.0.9: PostScript remembers the selected layers using the project variable POSTSCRIPT_LAYER 2011-08-19: 33.2.0.9: Pad names of vias editable, e.g. for test point names 2011-08-16: 33.2.0.9: [Del] in PCB now 4-step: Groudplane elements first, if selected, then other 3 steps, like before 2011-08-15: 33.2.0.9: Printing: Centering holes always 0.5 mm for manual drilling 2011-08-15: 33.2.0.9: The first component was missing in the Pick&Place list in certain cases 2011-08-09: 33.2.0.9: Improved import of components that use several inner copper layers 2011-08-03: 33.2.0.9: Front panel: Import of milling figures from the database: Sometimes figures were not found properly 2011-08-01: 33.2.0.9: Assembly with PCB-POOL: Improved assignment of components that can be ordered with PCB-POOL directly 2011-07-26: 33.2.0.9: Integrated the package selection into the component browser 2011-07-26: 33.2.0.9: Improved the organisation of the tabs in the component browser 2011-07-24: 33.2.0.9: Abort snap-on-element with [+]: Previous Cursor form is restoted 2011-07-22: 33.2.0.9: Message "Package ripped up" can be switched off 2011-07-21: 33.2.0.9: Sometimes the air wires were not displayed 2011-07-21: 33.2.0.9: Online update of the component database: Redundant IBF components and IBF packages can also be deleted 2011-07-20: 33.2.0.9: Sidebar: "Layer for tracks" sometimes failed 2011-07-14: 33.2.0.9: Isolation milling: Added format EMC² LinuxCNC 2011-07-13: 33.2.0.9: Undo after copying with clipboard in PCB: Sometimes rests of tracks remained 2011-07-13: 33.2.0.9: XGerber export, Apertures: APR and WHL file also contain the angle for pads and the radius for RoundRect 2011-06-21: 33.2.0.9: XGerber export: Skew pads are exported as pads and are not crayoned instead with a small aperture 2011-05-20: 33.2.0.9: Strength of the crosshair adjustable: Settings (INI), 1..255 2011-05-20: 33.2.0.9: Isolation milling: Under certain circumstances RubOut could cut corners of tracks and pads off 2011-05-20: 33.2.0.9: After some time the message "Canvas does not allow drawing" could appear 2011-05-12: 33.2.0.9: Display of internal connections in packages suppressible (thin lines) 2011-05-05: 33.2.0.9: Improved calculation of air wires 2011-05-05: 33.2.0.9: Improved online update of the component database 2011-04-28: 33.2.0.9: Message "Wrong grid in schematic" suppressible in Settings (INI) 2011-04-27: 33.2.0.9: Undo a "Replace package" could raise an exception in certain cases 2011-04-23: 33.2.0.9: Assembly BOM: Property ORDER_NAME overwrites the type name, under which the component was found in the database 2011-04-22: 33.2.0.9: Testpoints bottom were sometimes checked against obstruction by components top instead of components bottom 2011-04-06: 33.2.0.9: Reo can also delete double signal segments in schematic 2011-04-05: 33.2.0.9: Snap-on-element with [+] also works directly in the pointer mode (s. status line) 2011-04-05: 33.2.0.9: Clipboard: If the mouse is outside the selected elements, the moving reference is set to the centre 2011-04-04: 33.2.0.9: Component ID, Package ID and manufacturer can be exported with the bill of material (BOM) 2011-03-31: 33.2.0.9: Select component in schematic + [F3] = Place package directly in PCB 2011-03-31: 33.2.0.9: Name of IBF and user package identical: The IBF package was preferred 2011-03-30: 33.2.0.9: Improved import of Eagle libraries 2011-03-30: 33.2.0.9: [Shift] + [F5] opens the grid dialog 2011-03-24: 33.2.0.9: Printing: Options "Background color" and "sharp black/white" exclude each other 2011-03-24: 33.2.0.9: Color dialog: E.g.: Window background color button [Standard color] sets the TARGET Standard-Color 2011-03-15: 33.2.0.9: TARGET starts without database file 2011-03-15: 33.2.0.9: Improved mirror under 3D components 2011-03-03: 33.2.0.9: Ground plane assistant: Generate ground plane: Connect pads and/or vias fully to the plane 2011-03-03: 33.2.0.9: Coordinate entry with [+] instead of mouse click: Intersection points of crossing lines are also regarded 2011-03-01: 33.2.0.9: Printing: Centering holes 1/3 of the drill diameter but minimum 0,3 mm and maximum 1,0 mm 2011-02-20: 33.2.0.9: Improved DXF output 2011-02-14: 33.2.0.9: [Ctrl] + [t] turns (rotates) one step backwards 2011-02-13: 33.2.0.9: Automatic airwires in schematics can be switched off in "Settings (INI)" 2011-02-08: 33.2.0.9: In PCB view: Restored menu point "Replace package" 2011-02-08: 33.2.0.9: In schematic view: Restored menu point "Replace component" 2011-02-08: 33.2.0.9: Component Names and Values Extra: Also applies for components that are imported afterwards 2011-02-07: 33.2.0.9: Property "variant" of components in a project is copied along during copy&paste and during panelization 2011-02-01: 33.2.0.9: Coordinate entry with [+] instead of mouse click: Crosshair shows catch position in background when selected 2011-02-01: 33.2.0.9: Status line: Better readable character font 2011-01-27: 33.2.0.9: [Ctrl]+[F7] or [Shift]+[F7] zooms only the circuit, not e.g. the page frame 2011-01-25: 33.2.0.9: Under certain circumstances the schematic view displayed wrong violet air wires 2011-01-18: 33.2.0.9: Converting ground planes to lines sometimes enlarged the planes and caused spacing violations 2010-12-20: 33.2.0.9: Umlauts (äöüÄÖÜ) in the Windows username inhibited the program start 2010-12-03: 33.2.0.9: Components copied in the schematic could sometimes not be imported into the layout correctly 2010-12-02: 33.2.0.9: [o] for options sometimes switched into another operation mode 2010-11-30: 33.2.0.9: V14 component import sometimes cancelled without notice 2010-11-30: 33.2.0.9: PCB outline assistant: "Change unit" might have caused problems 2010-11-26: 33.2.0.9: Delivered first V15 2010-10-30: 33.2.0.9: Start screen with time and date request appears now only just once a day 2010-10-19: 33.2.0.9: Snap on existing element coordinates with keys [+] or [*] also works with relative coordinates 2010-10-17: 33.2.0.9: Images in rectangles can be loaded from the following files: BMP, GIF, JPG, JPEG, PNG, TIF, TIFF 2010-10-17: 33.2.0.9: Images in rectangles have a better quality when zooming 2010-10-17: 33.2.0.9: Images in rectangles are saved as JPEG with quality 80 in the project file instead of bitmap (speed improvement) 2010-10-07: 33.2.0.9: Future vias for wire bridges are always free of solderstop and solder paste 2010-10-06: 33.2.0.9: Excellon coordinates are always output with a colon and fixed number of trailing zeroes 2010-09-19: 33.2.0.9: Automatic test points can be placed on solder and component side 2010-09-18: 33.2.0.9: Automatic test points were computed erroneously latterly 2010-09-18: 33.2.0.9: Signal traces can be drawn dotted and dashed in schematic 2010-09-15: 33.2.0.9: Counting the pins/pads was erroneously unter certain circumstances 2010-09-01: 33.2.0.9: The function of text elements can be changed easier 2010-08-26: 33.2.0.9: Pressing ':' during track placement shows a menu for vias 2010-08-25: 33.2.0.9: Width and height of the screen in [mm] are obtained from Windows during the first launch or after change of screen 2010-08-10: 33.2.0.9: Dragging with a small black box concerns only the respective tracks of the same signal 2010-08-10: 33.2.0.9: [Ctrl] + [F1] = Start DRC 2010-08-05: 33.2.0.9: DXF output uses hatches for tracks and areas instead of thick lines 2010-06-07: 33.2.0.9: Some oblong pads were misformed when printing mirrored 2010-06-01: 33.2.0.9: DRC also warns against tracks on layer 100 (or higher) 2010-05-31: 33.2.0.9: DRC also checks, whether a package was ripped-up 2010-05-31: 33.2.0.9: Bitmaps, JPEGs and other image formats can directly be invoked into schematics and PCBs 2010-05-31: 33.2.0.9: Rectangular pads can have percentaged rounded corners 2010-05-31: 33.2.0.9: A great many of installed fonts delayed the program launch enormously 2010-05-31: 33.2.0.9: Polygons with signals can be used as connections. Signal tracks inside of polygons are no more necessary 2010-05-31: 33.2.0.9: Contiguous polygonal chains (without a signal) can also be selected together as one trace 2010-04-15: 33.2.0.9: Double click (M11) is only recognized, if the mouse is still near the first click position 2010-03-25: 33.2.0.9: Setting (INI): Double click message is processed extra. For programmable mouses 2010-03-15: 33.2.0.9: Isolation milling: DIN/ISO G-Code: After tool change: Move to X/Y mid coords first or to Z speed height 2010-03-03: 33.2.0.9: Snap on existing element coordinates with keys [+] or [*] 2010-03-03: 33.2.0.9: Gerber and Excellom export do not contain umlaute any more (äöüÄÖÜßçáéíóú...) 2010-03-02: 33.2.0.9: Excellon import also reads the "R" command (Repeat) 2010-02-17: 33.2.0.9: DRC: Whether a signal is seen as completly routed, is now independent of the grid settings 2010-02-13: 33.2.0.9: Moved the creation of nooks in corners into the context menu of the black selection rectangles 2010-02-10: 33.2.0.9: Added Conrad component calculator 2010-02-10: 33.2.0.9: Added new front panel designer 2010-02-09: 33.2.0.9: DRC: A signal with only one pin connected is provided with an error marker at the pin (Not connected...) 2010-02-09: 33.2.0.9: M11 in the TARGET window also works with an artificial doubleclick generated by the mouse driver (WM_LBUTTONDBLCLK) 2010-02-03: 33.2.0.9: Viewer also searched for the path with the libraries 2010-01-12: 33.2.0.9: DRC with splines as tracks sometimes led to an access violation 2009-12-07: 33.2.0.9: Added [Stop] button to top toolbar 2009-11-25: 33.2.0.9: Short air wires are drawn with triple pen width 2009-11-20: 33.2.0.9: DRC: The aura of elements can be taken into account with spacing checks 2009-11-19: 33.2.0.9: Mouse wheel also works with mouses with zDelta<120 2009-11-17: 33.2.0.9: XGerber: Lines that are too thin are reported during export. Now also including the layer number 2009-11-17: 33.2.0.9: DRC: Single copper layers can have their own constraints: Minimal track width and spacing 2009-11-13: 33.2.0.9: Set text near to a component: All component properties are possible as text functions 2009-11-10: 33.2.0.9: REFs and block diagrams are not tested for "library missing" etc. 2009-11-07: 33.2.0.9: Sped up computation of air wires (rats-nest) significantly 2009-10-25: 33.2.0.9: Settings (INI): Mouse with [Ctrl] zooms but scrolls without [Strg] 2009-10-21: 33.2.0.9: Cross hair [F8] doesn't conceal lines any more 2009-10-19: 33.2.0.9: Pressing [ESC] in the welcome dialog halts the program directly 2009-10-19: 33.2.0.9: Corners of tracks can be moved inwards, angles are preserved (nooks, ears) 2009-10-16: 33.2.0.9: Ground plane assistant: Existing auras can also be reduced in size 2009-10-16: 33.2.0.9: Package dialog: Inserted Buttons: [Display name] and [Display value] 2009-10-02: 33.2.0.9: With nearly square screen pixels, the value of the visible screen height is not adjusted stealthily 2009-09-20: 33.2.0.9: Platine: Menüpunkt "Aktionen / Länge der Signale anzeigen..." eingefügt 2009-09-17: 33.2.0.9: Move several selected elements in schematic: Signals do not rip off any more 2009-09-14: 33.2.0.9: Numbers of SMD pads are only visible, if the respective copper layer is visible 2009-09-09: 33.2.0.9: TARGET.INI saves, on which side components shall be placed (SMD top/bottom, THP top/bottom) 2009-09-07: 33.2.0.9: Bend menu: Added vertices are now always on the grid 2009-09-07: 33.2.0.9: Added angle indicator into line dialog and track dialog 2009-09-04: 33.2.0.9: Info dialog: Updated information about the local computer 2009-09-04: 33.2.0.9: Project: Component properties from database: "CmpName" counts as the component name (IC5, R12, C23) 2009-09-04: 33.2.0.9: PCB background: blach => dark grey; white => light grey 2009-08-30: 33.2.0.9: Menu "Edit / Move to other page..." moves the selected schematic elements to an other schematic page 2009-08-27: 33.2.0.9: 3D view: Several signals and components can be selected with [Ctrl] + M1 and show in different colors 2009-08-26: 33.2.0.9: DRC: Introduced error "Drill missing" for pads on layer 100 or for padstacks having several copper layers 2009-08-26: 33.2.0.9: Sidebar: Entering words in the search field: The keyboard key "down" leads into the selection filed, if visible 2009-08-26: 33.2.0.9: Dragging on layer "copper top" only touches lines on layer "position top" if these are bridges 2009-08-24: 33.2.0.9: Improved schematic autorouter (point-to-point router) 2009-08-23: 33.2.0.9: Isolation milling: Added "Excellon" as milling format 2009-08-23: 33.2.0.9: Dragging the small black box of a line end now always uses the layer of the selected line, not the active copper layer 2009-08-21: 33.2.0.9: Pictures of the packages in the library browser have realistic pad forms now 2009-08-10: 33.2.0.9: PCB outline assistant with Undo and the outline created can be selected as one (block) 2009-08-09: 33.2.0.9: Object inspektor: Double click toggles boolean field 2009-07-29: 33.2.0.9: Inserted menu point "Ground planes / Spacing to PCB edge" 2009-07-05: 33.2.0.9: New project: Several personal project templates are possible 2009-07-02: 33.2.0.9: DRC: List of errors disappears when double clicking an error, a button on the left top gets the list back 2009-06-19: 33.2.0.9: Signal names can now also be displayed in PCB view: Menu "Settings / Options" 2009-06-19: 33.2.0.9: Starshaped signals also possible in schematics 2009-06-18: 33.2.0.9: Starshaped signals in PCB: Menu point "Actions / Ground planes", e.g. allow to connect AGND + DGND manually 2009-06-10: 33.2.0.9: Select nothing (Deselect) with [Shift]+[Esc] 2009-06-08: 33.2.0.9: Inserted menu point: "Delete all autorouted tracks" 2009-06-08: 33.2.0.9: Printing offset can also refer to the PCB outline, even if this layer ist switched invisible 2009-06-06: 33.2.0.9: Inserted menu point: "Insert two corners" in corner menu 2009-05-30: 33.2.0.9: Signal names in starshaped signals can also contain ',' 2009-05-27: 33.2.0.9: Schematic: Bring element to back or front (in context menu) 2009-05-25: 33.2.0.9: Selection assistant: Whole components can be selected. E.g. "Component prefix is-equal R" selects all resistors 2009-05-14: 33.2.0.9: Isolation milling: Optimization of the rub out function 2009-05-05: 33.2.0.9: Inserted resistor slektor: as menu point and if one clicks on the resistor symbol in the sidebar 2009-05-05: 33.2.0.9: Pick&Place with a variable line format 2009-04-22: 33.2.0.9: When swapping the bend mode, sometimes rest were remaining on the screen 2009-04-22: 33.2.0.9: Check: Component not found: Absolute paths are not used, but library names only 2009-03-31: 33.2.0.9: Ground plane assistant: An existing aura of "hostile" tracks is never diminished 2009-03-30: 33.2.0.9: Component search below in the sidebar: Component once searched for was sometimes always searched again 2009-03-19: 33.2.0.9: Moving bus segments: The connected signals are dragged along 2009-03-08: 33.2.0.9: Cross probe [F3] with a symbol with no package directly starts the component selector in PCB view 2009-03-07: 33.2.0.9: M1 with [Ctrl]: Select elements additionally 2009-03-07: 33.2.0.9: M1 with [Shift]: Select single elements of components (additionally), even if "components always completely" is set 2009-03-04: 33.2.0.9: Printing: White triangles, rectangles and disks are not printed in schematic when using "sharp black/white" 2009-03-03: 33.2.0.9: Snap-on-pad sometimes captured the cursor when working with cursor keys 2009-03-03: 33.2.0.9: Concatenating one signal completely with another in schematic also takes along all tracks in the PCB 2009-03-02: 33.2.0.9: V13 can read libraries of the V14 (new V14 coponents from IBF are blank, selfdrawn components work) 2009-02-20: 33.2.0.9: Customers with an umlaut vowel in their windows user name sometimes had problems with their libraries 2009-02-20: 33.2.0.9: Bill of material: Summarizing components and sorting according to names possible 2009-02-19: 33.2.0.9: Copy&Paste in schematic sometimes created erros 2009-02-19: 33.2.0.9: DRC: [ESC] closes error list 2009-02-18: 33.2.0.9: Possibility to have several separated PCBs in one project file 2009-02-18: 33.2.0.9: Component export: [New library] also selects the new library directly 2009-02-13: 33.2.0.9: Menu "Help": Contents lead to a new overview 2009-02-13: 33.2.0.9: Cirles and tori can be dashed too 2009-02-12: 33.2.0.9: Copying of gouped modukes increments the module names 2009-02-09: 33.2.0.9: HPGL: Improved export of circles, end point matches start point exactly 2009-02-05: 33.2.0.9: Size of the sliders in the sidebar is saved 2009-01-30: 33.2.0.9: DRC: "Multiple Supply" wurde zu oft angezeigt 2009-01-28: 33.2.0.9: Improved the position of the pin numbers in schematic 2009-01-26: 33.2.0.9: Bill-Of-Material with overwite request 2009-01-26: 33.2.0.9: Insert texts with component property "Special" near the component's grip cross ex post 2009-01-26: 33.2.0.9: Optimisation of the indexing of the libraries (TARLibs002.txt) 2009-01-20: 33.2.0.9: Path for library information adjustable (TARLibs001.txt) 2009-01-20: 33.2.0.9: TARGET.INI: Permitted variables in path names 2009-01-20: 33.2.0.9: Save settings: Accelerated access to INI files 2009-01-20: 33.2.0.9: DRC: The error list stays in forground and the different errors are clickable 2009-01-19: 33.2.0.9: The Grid can be displayed in foreground or in background 2009-01-19: 33.2.0.9: HPGL generic output: Font DIN-ISO-ANSI is supported 2009-01-16: 33.2.0.9: New for of fiducial (positioning mark): Slice (filled circle) 2009-01-13: 33.2.0.9: Pure mounting holes are selectable more easily 2009-01-13: 33.2.0.9: PCBout: Excellon with Inches generated oversized coordinates sometimes 2009-01-02: 33.2.0.9: Text dialog: Pin names were sometimes changed into !PIN 2008-12-23: 33.2.0.9: Improved handling of linked libraries *.SYM3001LNK and PCK3001LNK 2008-12-18: 33.2.0.9: [F8]: Cross hairs are shown directly 2008-12-18: 33.2.0.9: Check: Message "Multiple Supply" also creates error markers in schematic 2008-12-15: 33.2.0.9: Selecting a signal island does not toggle layers visible unintentionally 2008-12-12: 33.2.0.9: Sidebar: The buttons for the bend modes (orthogonal, diagonal...) also automatically switch to the mode "place signal" 2008-12-12: 33.2.0.9: Sidebar: The buttons for the drag modes (bent,arc,spline) also automatically switch to the mode "drag" 2008-12-11: 33.2.0.9: Sidebar: Box "Pins also" didn't work under all circumstances 2008-12-11: 33.2.0.9: 3D text editor lost keyboard focus, if the mouse was moved across the 3D image 2008-12-11: 33.2.0.9: Schematics: Improved Point-to-Point router 2008-12-10: 33.2.0.9: PCBout: Lines of the PCB outline are always drawn with a small aperture, even if their width is zero 2008-12-09: 33.2.0.9: PCBout: Thinner tracks are not replaced by the "Thinnest aperture", but the warning remains 2008-12-05: 33.2.0.9: Schematics: Point-to-Point router can be disabled in settings (INI file) 2008-12-03: 33.2.0.9: Component assistants: The scripts can now be edited with a text editor directly 2008-12-03: 33.2.0.9: Schematic symbols can now also be imported scaled from a library (property "SCALED") 2008-12-02: 33.2.0.9: Konverter for Eagle components: Rotated filled rectangles were converted errouneously sometimes 2008-12-02: 33.2.0.9: Standard track width and standard track spacing from "Settings (Project)" were ignored sometimes 2008-11-26: 33.2.0.9: Libraries: Sometimes German component names were displayed 2008-11-26: 33.2.0.9: Isolation milling: HPGL: Added switch for Drills: Drills as very short lines 2008-11-26: 33.2.0.9: Sidebar: The buttons [L] and [S] for the layer sets didn't always work properly 2008-11-13: 33.2.0.9: PostScript: BoundingBox also includes the width of the elements shown 2008-11-11: 33.2.0.9: Sidebar: Layers are toggled visible/invisible directly 2008-11-11: 33.2.0.9: Bill of material BOM: If the entry "Output file(s)" is empty, "#D\#N.XLS" is assumed 2008-11-11: 33.2.0.9: Drag with [g]: Nothing hit: TARGET doesn't enter the drag mode 2008-11-07: 33.2.0.9: Toggling layers visible: The visible layers of the sidebar were not always adjusted 2008-11-07: 33.2.0.9: Changing pages with [Q]: The active page in the sidebar was not always adjusted 2008-10-28: 33.2.0.9: Exporting a component to the library often caused all library index files to be updated 2008-10-28: 33.2.0.9: Fast switching of the tab-sheets in library browser sometimes generated error messages 2008-10-28: 33.2.0.9: Reo reconstructs deleted property COMPONENT_VALUE out of the library 2008-10-28: 33.2.0.9: Property COMPONENT_VALUE was deleted under special circumstances 2008-10-22: 33.2.0.9: Sidebar: Naming new schematic pages sometimes renamed the wrong page 2008-10-21: 33.2.0.9: Pick&Place: Alternativly also relative coordinates as origin 2008-10-19: 33.2.0.9: Sped up browsing in the libraries 2008-10-08: 33.2.0.9: Symbol import: Closing the dialog "Import component" with [X] really cancels the whole import 2008-10-07: 33.2.0.9: Isolation milling: Rubout now works in a meandering way 2008-10-02: 33.2.0.9: Removed the pointer toolbar and the layer toolbar 2008-10-02: 33.2.0.9: Inserted the sidebar 2008-09-23: 33.2.0.9: Speeded up the selection of modules 2008-09-21: 33.2.0.9: In the dialogs "Line, Track, Torus and Spline" the length of the resulting element is displayed "live" 2008-09-19: 33.2.0.9: Isolation milling: Rubout sometimes created milling lines all across the board 2008-09-12: 33.2.0.9: Decomposing a module (group) decomposed all modules 2008-08-28: 33.2.0.9: Grid color also adjustable in grid dialog 2008-08-28: 33.2.0.9: [Strg] + [Pos 1] lets you manually enter the relative origin as coorinates 2008-08-28: 33.2.0.9: Lines without round line caps sometimes caused problems when convertig ground planes into lines 2008-08-28: 33.2.0.9: If many teardrops were created at once, undo worked individually only 2008-08-27: 33.2.0.9: Importing Eagle libraries: In packages sometimes bent lines were missing 2008-08-20: 33.2.0.9: In entry fields for coordinates now also "+" and "-" can be used as math. operators. E.g. "7.25+3" meaning 10.25 2008-08-19: 33.2.0.9: The aura of a pad can be suppressed on one or on several layers 2008-08-17: 33.2.0.9: Mechanical construction: Introduced trimming of lines and tori 2008-08-12: 33.2.0.9: Introduced schematic autorouter: Point-to-point router 2008-08-11: 33.2.0.9: Layout: [2], [o], change track width and aura. [OK]. The following validation dialog now shows the correct future aura value 2008-08-07: 33.2.0.9: Pad and via dialog: X and Y coordinates can be adjusted separately 2008-08-04: 33.2.0.9: Lines without a signal can now also have an aura against the ground plane 2008-07-30: 33.2.0.9: Online component search: Search also for pad count available 2008-07-28: 33.2.0.9: Online component search: Search also for component value available 2008-07-25: 33.2.0.9: Changing a component value also changes the internal variable COMPONENT_VALUE for 3D and SPICE simulation 2008-07-23: 33.2.0.9: Online component search: Search also for manufacturer available 2008-07-22: 33.2.0.9: Old V3 projects sometimes opened at the illegal page 0 and thus didn't show the schematic 2008-07-15: 33.2.0.9: Isolation milling: HPGL now really makes a minimal step in drill holes (see 07.09.2007) 2008-07-01: 33.2.0.9: Placing PCB tracks: With key [.] the now following via is initially only shown as a phantom 2008-06-27: 33.2.0.9: Isolation milling also exports spline curves to PCB outline 2008-06-20: 33.2.0.9: Empty text elements are not shown as small empty rectangles when printing 2008-06-20: 33.2.0.9: Online component search has several entry fields 2008-06-12: 33.2.0.9: Import Eagle libraries: EDIT command possible with apostrophes 2008-06-12: 33.2.0.9: 3D resitors can show their color code, new command RC in 3D model 2008-06-12: 33.2.0.9: Acceleration of 3D gerneration 2008-06-11: 33.2.0.9: Bus assistant hung up, if start and end number were identcal, e.g. A2 to A2 2008-06-11: 33.2.0.9: English and French version: Sometimes names of components in libraries were changed unwantedly 2008-06-06: 33.2.0.9: The menu can be displayed in the external autorouter (Electra) 2008-06-04: 33.2.0.9: Moduls can now together be directly selected with a M1 click, an extra switch was added 2008-06-03: 33.2.0.9: Converter for Eagle libraries: Pads with alphanumeric pad names only get incremented pin numbers now 2008-05-30: 33.2.0.9: Undo after changing component properties sometimes caused access violations 2008-05-30: 33.2.0.9: Sometimes filled elements were not displayed 2008-05-27: 33.2.0.9: Packages locked against any movement: Deletion and reinsertion caused problems 2008-05-27: 33.2.0.9: Property dialog can now always be confirmed using [Return] 2008-05-27: 33.2.0.9: With importing old Gerber files (RS274D) now several aperture list formats can be decoded semi-automatically 2008-05-26: 33.2.0.9: Inserting packages sometimes generated access violation errors 2008-05-21: 33.2.0.9: Flat triangles and rectangles without height or width are shown now as lines 2008-05-21: 33.2.0.9: Empty text elements are shown as small empty rectangles 2008-05-14: 33.2.0.9: Text elements in schematic were erroneously shown mirrored when [m] was pressed during paste 2008-05-12: 33.2.0.9: The "vertical line" character "|" in a signal name starts and ends an overline for inverted signals 2008-05-04: 33.2.0.9: Elements can be concatenated as moduls: Context menu, menü "Edit" and search 2008-05-04: 33.2.0.9: The "vertical line" character "|" in a pin name starts and ends an overline for inverted pins 2008-05-02: 33.2.0.9: After copy/paste of PCB parts sometimes pads were cut off in isolation milling 2008-04-29: 33.2.0.9: TARGET 3001! viewer is available 2008-04-28: 33.2.0.9: TIFF output: Added information on resolution again and reduced file size of B/W TIFFs 2008-04-27: 33.2.0.9: Scale dialog: Inserted [100%] button 2008-04-25: 33.2.0.9: Check function can give warnings if a component in the project is older than in the respective library 2008-04-24: 33.2.0.9: Dual screen systems: Hints are displayed on the correct screen 2008-04-23: 33.2.0.9: Components in library: Symbols can be automatically reloaded from other equvalent components 2008-04-15: 33.2.0.9: Selection assistant always preselects "Element type" as first property 2008-04-14: 33.2.0.9: Alignment assistant also copies the 3D model from the library 2008-04-14: 33.2.0.9: TIFF output of big pictures with high resolution caused problems 2008-04-14: 33.2.0.9: When toggeling a layer visible using the layer toolbar, often static crosshairs remained on the screen 2008-04-11: 33.2.0.9: Mounting drills of packages may be assigned to a signal (e.g. GND) without a schematic representation of that fact 2008-04-08: 33.2.0.9: Pressing [Shift] while dragging a sharp bend, enforces it to be a 45° bend 2008-04-07: 33.2.0.9: Texts can be visible or invisible depending on the selected variant 2008-04-07: 33.2.0.9: Display of the PCB surface area in the info dialog in menü "help" 2008-04-07: 33.2.0.9: When reloading component properties from the library, the existing properties are not deleted first 2008-04-02: 33.2.0.9: Corrected auras of pads from before V12.2.0.28 (2005-11-23), if the copper was smaller than the drill hole 2008-04-01: 33.2.0.9: Bill of material: Several variants can now be exported in different files in one go 2008-03-31: 33.2.0.9: Extended the list of last recently used projects to 30 2008-03-31: 33.2.0.9: Saving a project sometimes forgot to remember which layers were just toggled visible or not 2008-03-28: 33.2.0.9: Pictograms of the drilling plan: Pictograms are saved with the project data 2008-03-28: 33.2.0.9: Pictograms of the drilling plan: The legend of drill symbols keeps position, size and layer 2008-03-26: 33.2.0.9: Pictograms of the drilling plan: The legend of drill symbols is added on the right side beside the PCB 2008-03-20: 33.2.0.9: Component import: The future font weight in percent can also be defined 2008-03-20: 33.2.0.9: PostSript: Drill holes of pads without copper (Height=0, Width=0) were not always displayed 2008-03-18: 33.2.0.9: Box for variants on the right top gets longer if one clickes on it (for long variant names) 2008-03-18: 33.2.0.9: Settings (Project): The font DinIsoAnsi was missing in the lists 2008-03-13: 33.2.0.9: Variant components could not be reset to invariant any more and were always displayed dotted 2008-03-13: 33.2.0.9: Color dialog now with hex input field 2008-03-13: 33.2.0.9: Color dialog sometimes received the wrong color 2008-03-11: 33.2.0.9: TIFF output with compression now 2008-03-06: 33.2.0.9: PostScript output: Sometimes padstacks were displayed erroneously in the schematic pages 2008-02-28: 33.2.0.9: Schematic: Component names and values can be switched invisible in menu "View" 2008-02-19: 33.2.0.9: Teardrops can now also be applied on all selected pads and vias at once 2008-02-17: 33.2.0.9: Import packages: Fonts for component names and values can be determined for the future 2008-02-17: 33.2.0.9: Import symbols: Fonts for component names and values and pin names can be determined for the future 2008-02-12: 33.2.0.9: Successive import of several components: The selected rotation and mirroring is remembered 2008-02-12: 33.2.0.9: Displacement of components: [m] for mirroring during displacement is possible 2008-02-11: 33.2.0.9: Possibility to make own components available to IBF when exporting components and in the library browser 2008-02-05: 33.2.0.9: The error message "ERROR_INVALID_AT_INTERRUPT_TIME" appeared, if the date was put forward many years 2008-02-04: 33.2.0.9: Export of self drawn components: Those can be transmitted to IBF so that all users can benefit from 2008-01-29: 33.2.0.9: Use capture window with M1 "backwards" from right to left: Touching an element is enough for selecting 2008-01-29: 33.2.0.9: Library browser: Some electrolytic capacitors were not shown in the tree view 2008-01-29: 33.2.0.9: Rename signal: If the new name is already existant, the two signals can be connected on request 2008-01-18: 33.2.0.9: 3D view: Repaired problems with TrueType fonts 2008-01-04: 33.2.0.9: Component preview in component browser: Drillholes are now displayed too 2007-12-30: 33.2.0.9: Print dialog: Centering holes always have min. 0.25 mm copper around to set the drill bit 2007-12-30: 33.2.0.9: Print dialog: Printing of background color disengageable 2007-12-18: 33.2.0.9: The aura (min. spacing) when moving vias and pads is now also shown dashed, as it is displayed for moved tracks 2007-12-18: 33.2.0.9: Using the keys [+] or [*] during the creation of elements, coordinates can easily be entered manually too 2007-12-17: 33.2.0.9: Auto-Pan during the wiring of signal traces and copper tracks available 2007-12-17: 33.2.0.9: Library browser: Tab "Library": Component selection: Enter initial chars to approach a component 2007-12-06: 33.2.0.9: Improved import of Eagle libraries 2007-11-29: 33.2.0.9: Isolation milling: Z-Height for moving adjustable 2007-11-29: 33.2.0.9: Component names are always saved without leading or trailing space characters (blanks) 2007-11-28: 33.2.0.9: PCB without schematic: The online library is now available when importing packages 2007-11-28: 33.2.0.9: DXF import: Entity ELLIPSE is now recognized 2007-11-27: 33.2.0.9: Message "Tear component to pieces" can now be set for schematic and PCB separately 2007-11-27: 33.2.0.9: Now also inner copper layers are displayed in 3D view 2007-11-21: 33.2.0.9: DXF import: Replaced short arcs having a huge radius and a center lying far out by straights 2007-11-16: 33.2.0.9: Replaced all SMTP accesses by HTTP accesses 2007-11-15: 33.2.0.9: Assign symbol to a free package: List of symbols without packages is sorted now 2007-11-13: 33.2.0.9: Symbol handles in schematics have a checkmark, if the component has already a placed package 2007-11-12: 33.2.0.9: Convert project into "PCB without schematic": 3D models vanished 2007-11-12: 33.2.0.9: DRC: Sometimes the value of the minimum spacing in the summary was wrongly zero 2007-11-09: 33.2.0.9: DRC: Error message "Drillhole in SMD Pad" switchable 2007-11-05: 33.2.0.9: DRC: Several different ground planes in one copper layer: Spacing of one plane to another is checked too 2007-10-31: 33.2.0.9: Added export of netlists in Pads-PowerPCB V3.0 format 2007-10-31: 33.2.0.9: Isolation milling: ColinBus: Bottom side is not mirrored, as ColiDrive V2.2.0.44 does that itself 2007-10-25: 33.2.0.9: Export to Eagle: Improved handover of busses 2007-10-25: 33.2.0.9: DRC: Bridges are only capable of creating short cuts with their ends 2007-10-24: 33.2.0.9: Background pin check wrongly also counted the REFs pins: This could lead to access violations (discover) 2007-10-24: 33.2.0.9: Removed hierarchy browser 2007-10-24: 33.2.0.9: Moved functions of the hierarchy browser to menu "Settings" 2007-10-20: 33.2.0.9: Highlighting selected elements: Light/dark or extra color: Separately selectable for schematic and PCB 2007-10-17: 33.2.0.9: Context menu (M2 popup): Added Cut, Copy, Paste and Duplicate to context menu 2007-10-15: 33.2.0.9: Text elements are now also copied additionally as text into the clipboard (Insert contents in word program) 2007-10-15: 33.2.0.9: Naming of the emerging signal islands when ripping up a signal: Improvement of the change from 21.03.2005 2007-10-15: 33.2.0.9: Selected elements are drawn last (topmost) within each layer 2007-09-25: 33.2.0.9: TrueType fonts on the screen: Improved displayed text size when zoom is low 2007-09-23: 33.2.0.9: DXF output: Solder paste (cream) was not always exported 2007-09-21: 33.2.0.9: The Windows Taskbar displays the name of the current project, instead of only "TAR3001" 2007-09-20: 33.2.0.9: The aura of rectangles, triangles, slices and texts is now also regarded for rasterization of ground planes 2007-09-20: 33.2.0.9: Improved converter for Eagle libraries 2007-09-18: 33.2.0.9: !VARNR as text function for the variant number 2007-09-17: 33.2.0.9: Redirected the help for the working modes to the Wiki 2007-09-17: 33.2.0.9: Dual screen systems: Messageboxs appear on the correct screen 2007-09-14: 33.2.0.9: Redirected the help in dialogs to the Wiki 2007-09-12: 33.2.0.9: Isolation milling for Colinbus machines 2007-09-12: 33.2.0.9: Printing dialog: Show variants with variant number 2007-09-12: 33.2.0.9: Variants dialog: Activate a component for all variants or for none 2007-09-12: 33.2.0.9: Clipboard: Also single elements of several symbols / packages can be copied 2007-09-10: 33.2.0.9: 3D view also displays tracks made of arcs and splines 2007-09-08: 33.2.0.9: Expansion of the PCB-Pool calculator for new PCB-Pool products 2007-09-07: 33.2.0.9: HPLG outputs for drill holes now execute a minimal X-movement so that they are not ignored by several HPGL viewers 2007-08-28: 33.2.0.9: TARGET sometimes didn't start, if a T3001 file was double-clicked in Windows explorer 2007-08-21: 33.2.0.9: Improved mirrored printing of texts with a TrueType font 2007-08-20: 33.2.0.9: When moving component or signal names the affilation is indicated by a line 2007-07-13: 33.2.0.9: XGerber and drill: Inserted an extra button top right in PCB view and assigned the shortcut key [F11] 2007-07-13: 33.2.0.9: Generic HPGL driver: Coordinate units can be switched: 0,025 mm and 0,0254 mm 2007-07-10: 33.2.0.9: Generic HPGL driver: Splines can be converted too 2007-07-09: 33.2.0.9: PCBout: Drill file export Excellon: Header parts "M48" and "METRIC" can be switched off 2007-07-06: 33.2.0.9: Vias as padstacks: Sometimes the signal name of such a via was not changeable 2007-07-05: 33.2.0.9: Component export: Selection of prposed package: Inserted preview picture 2007-07-05: 33.2.0.9: List of the 20 components last recently used: Inserted preview picture 2007-07-05: 33.2.0.9: Improvement of components that have different names in different languages 2007-07-02: 33.2.0.9: List of the 20 components last recently used: Button [X] did not remove a component from the List 2007-06-28: 33.2.0.9: PCBout: Notice is given, if a TrueType font is not matched exactly 2007-06-28: 33.2.0.9: Introduced property "Aura" for rectangles, triangles, slices and text elements 2007-06-26: 33.2.0.9: Mouse click M2h with key [Shift] or [Ctrl] moves the page according to mouse movement 2007-06-21: 33.2.0.9: Backups in a monthly or weekly cycle sometimes caused problems during project saving 2007-06-12: 33.2.0.9: Mil is the standard unit in the english version now (1/1000 inch) 2007-06-01: 33.2.0.9: PostScript output: Paper sizes also possible in landscape format 2007-05-29: 33.2.0.9: The appendixes _IEEE and _DIN are cut off for the component names when importing components 2007-05-24: 33.2.0.9: XGerber and Excellon import: Excellon import now also understands decimal coordinates 2007-05-24: 33.2.0.9: PCBout: Excellon output uses METRIC and decimal coordinates because of higher precision 2007-05-23: 33.2.0.9: Dialog "Settings": Inserted buttons for weekly and monthty backup 2007-05-23: 33.2.0.9: Excellon import: Command METRIC was ignored sometimes 2007-05-16: 33.2.0.9: PCBout: After cration of a new folder for the folder tree view this new folder can now be selected 2007-05-16: 33.2.0.9: XGerber import: With G36/G37 polygons an entered offset was taken twice 2007-05-10: 33.2.0.9: Symbol export: Component description in english, french or german 2007-05-09: 33.2.0.9: PCBout: Using option "G36 / G37 commands directly", adjacent triangles are combined to polygons 2007-05-08: 33.2.0.9: PCBout dialog: Long file paths are abbreviated properly 2007-05-04: 33.2.0.9: Select whole signal: Sometimes pin names on other schematic sheets were selected too 2007-05-04: 33.2.0.9: Accelerated online component search and made it more flexible 2007-05-04: 33.2.0.9: Accelerated online library update 2007-04-27: 33.2.0.9: Symbol export: The type of the component is directly sorted into the search tree 2007-04-24: 33.2.0.9: DRC: Error message for drill in a SMD padstack 2007-04-22: 33.2.0.9: PCB-Pool Calculator, Frontpanel Calkulator: Credit card "Valid thru" up to 2013 possible 2007-04-22: 33.2.0.9: WK-Mechanik Frontpanel Calculator: Silk screen color was sometimes shown different than selected 2007-04-20: 33.2.0.9: Placing signal traces in schematic ends, if something is hit 2007-04-19: 33.2.0.9: Centering marks (Fiducials) can now have a signal too 2007-04-18: 33.2.0.9: Automatic start of the autoplacer can be switched off 2007-04-18: 33.2.0.9: Automatic start of the PCB outline wizard can be switched off 2007-03-29: 33.2.0.9: Component import: If a component was not found, one can request it from IBF 2007-03-23: 33.2.0.9: PCB without placed packages: Autoplacer starts automatically 2007-03-23: 33.2.0.9: PCB with missing PCB outline: Outline wizard starts automatically 2007-03-22: 33.2.0.9: Autoplacer: Components also placeable outside obove the PCB outline 2007-03-22: 33.2.0.9: Autoplacer: SMDs also placable on bottom side 2007-03-22: 33.2.0.9: Autoplacer: Place a certain component group only (property "MODULE") 2007-03-22: 33.2.0.9: Altered HTTP calls, improved internet access (auto update etc.) 2007-03-18: 33.2.0.9: Min. width and min. spacing can now be entered for several signals together 2007-03-15: 33.2.0.9: Mirror without flipping: Package property "flipped" is not affected 2007-03-11: 33.2.0.9: Hybrid autorouter: Optimisation from pass 2 sometimes didn't have any effect 2007-03-10: 33.2.0.9: Route prohibitions now work with the hybrid autorouter even when used in padstacks 2007-03-07: 33.2.0.9: XGerber import: The files to import are displayed as texts within the dialog 2007-03-07: 33.2.0.9: XGerber import: G71* as a switch to metric coordinates did not work in all cases 2007-03-07: 33.2.0.9: TARGET 3001! V12 stands still, the current version is now V13 2007-03-02: 33.2.0.9: Font Din-Iso-Ansi: Cypher 5 closed less, to avoid a mix-up with cypher 6 2007-03-01: 33.2.0.9: XGerber output: Font Din-Iso-Ansi is completely supported, even inverted in ground planes 2007-02-23: 33.2.0.9: Isolation milling: RubOut now also deletes copper in thick auras 2007-02-23: 33.2.0.9: Librarybrowser: English and French version sometimes had too many results when searching 2007-02-20: 33.2.0.9: If a local search for components gives no results, an online search is following automatically 2007-02-16: 33.2.0.9: PCB-Pool Calculator: Computation of delivery prices sometimes selected wrong countries 2007-02-12: 33.2.0.9: Symbol export: When gathering symbols with [y] the symbol swap number got lost 2007-02-01: 33.2.0.9: French lowercase and uppercase special characters are exchanged correctly 2007-01-31: 33.2.0.9: Printing: Sometimes a scale display was not updated correctly 2007-01-30: 33.2.0.9: Launch ground plane assistant several times: Old ground planes in that layer are deleted first 2007-01-30: 33.2.0.9: WK-Mechanik Frontpanel Calculator: "Silk screen black" was not possible in some cases 2007-01-25: 33.2.0.9: PCB-Pool Calculator: New delivery computation 2007-01-24: 33.2.0.9: Introduced preview pictures in online library search 2007-01-24: 33.2.0.9: 3D model reloadable from a library package 2007-01-24: 33.2.0.9: Component properties reloadable from a library component 2007-01-24: 33.2.0.9: Treeview of components in sorted order 2007-01-23: 33.2.0.9: Assignment of copied symbols in schematic and copied corresponding packages in PCB sometimes failed 2007-01-22: 33.2.0.9: "Shift drawing into the center" sometimes damaged the rests of components that were not inserted yet 2007-01-01: 33.2.0.9: Packages can be locked against any movement 2006-12-21: 33.2.0.9: English and French versions sometimes had problems with a german name in the entry "proposed package" 2006-12-19: 33.2.0.9: XGerber import: Self intersecting G36/G37 polygons are split and displayed separately 2006-12-15: 33.2.0.9: Editing of component names in panelized boards sometimes had problems with the text content 2006-12-13: 33.2.0.9: Dragging of segment corners was slow with big projects 2006-12-12: 33.2.0.9: Improved output for PDF printers (e.g.: Adobe Acrobat Distiller or freePDFxp.de) 2006-12-12: 33.2.0.9: Improved the look of rounded line caps (which caused spikes with arcs and splines) 2006-12-11: 33.2.0.9: Placing tracks: Setting the aura with [o] like options: Aura is directly remembered 2006-12-11: 33.2.0.9: Info dialog now contains: N° of copper layers, N° of Drills, N° of SMD pads, length of PCB outline 2006-12-08: 33.2.0.9: Error markers can now be deleted like normal elements 2006-12-06: 33.2.0.9: Displacing now allows only orhogonal movements if key [Shift] is depressed 2006-12-06: 33.2.0.9: Sometimes the mouse cursors shown were wrong 2006-12-06: 33.2.0.9: Bus assistant can work with different steps: A0, A2, A4, A6, A8, ... 2006-12-04: 33.2.0.9: XGerber import: Import of arcs with wrong center point is now more tolerant (Error "Center point wrong") 2006-12-03: 33.2.0.9: Free drill holes in components (e.g. fixation holes) can now have a signal assigned 2006-12-03: 33.2.0.9: Also ground plane elements with signal that are part of a component are considered for the creation of thermal pads 2006-12-03: 33.2.0.9: Improved handling of multiline text 2006-12-03: 33.2.0.9: TIFF export output has the correct resolution information 2006-11-29: 33.2.0.9: Components with property SIM_MODEL_NEEDED=NO no longer cause a warning in the simulation (e.g. connectors) 2006-11-29: 33.2.0.9: Sometimes packages with translated names (from German to English) were not assigned to their components correctly 2006-11-22: 33.2.0.9: Some thermal pads that were generated automatically caused spacing violations 2006-11-16: 33.2.0.9: XGerber import: Polygons with circular edges possible 2006-11-16: 33.2.0.9: XGerber import: Also some self intersecting polygons with G36+G37 can be imported 2006-11-15: 33.2.0.9: WK calculator: Front panels with engraved TrueType fonts are not allowed 2006-11-15: 33.2.0.9: PCB Pool calculator: PCB smaller than 1cm² caused a division by zero error 2006-11-15: 33.2.0.9: Changed selection of the colors black and white for the checks in the layer toolbar 2006-11-14: 33.2.0.9: When editing elements or when importing packages no layers are switched visible unintentionally 2006-11-14: 33.2.0.9: Symbol and package dialog: X and Y coordinates can be adjusted separately 2006-11-13: 33.2.0.9: Key [o] also works when measuring and dimensioning 2006-11-10: 33.2.0.9: Converting a ground plane into lines sometimes caused many slight spacing violations 2006-11-01: 33.2.0.9: PCBout: Minimized the error concerning the aura of round pads 2006-10-31: 33.2.0.9: Enlarged limit for TARGET 3001! V12 discover (=demo) from 100 to 250 pins 2006-10-27: 33.2.0.9: Properties of several selected elements can now also be renamed and also be deleted 2006-10-24: 33.2.0.9: PCBout: Drill padstacks extra: Sometimes the normal drill file was empty (layer 100) 2006-10-24: 33.2.0.9: The respective view is remembered when toggling schematic sheets inside the same window 2006-10-23: 33.2.0.9: Search on online library server: Number of components displayed up to 1000 pcs 2006-10-20: 33.2.0.9: XGerber import: Several primitives possible in one aperture macro 2006-10-20: 33.2.0.9: Solved problem with DIN-ISO-ANSI text font in PostScript driver 2006-10-20: 33.2.0.9: DRC, check spacing: Improvement regarding corners of rectangular pads 2006-10-19: 33.2.0.9: Removed memory leaks in simulation model management 2006-10-10: 33.2.0.9: Design rule check: Introduced new error message: Drillhole in SMD pad 2006-10-10: 33.2.0.9: XGerber import ignored %MOMM% command, which could lead to coordinate overflows 2006-10-10: 33.2.0.9: PCBout: Layer numbers preceding every line in the selection box 2006-10-08: 33.2.0.9: Blockdiagrams: Reorganisation sometimes affected the signals of the REF pins in the blocks 2006-10-06: 33.2.0.9: Bill of material: Component property "BILL_OF_MATERIAL=NO" prevents a component to be listed 2006-10-06: 33.2.0.9: PCBout: Solder paste masks are proposed to be output automatically 2006-10-05: 33.2.0.9: Library udate: TARGET allocated more and more main memory (possible consequence was: error "out-of-memory") 2006-10-02: 33.2.0.9: Update manager: TARGET crates a copy of the old TarV12.exe, if it is updating itself 2006-10-02: 33.2.0.9: Added GenCAD as an output format 2006-09-28: 33.2.0.9: Creating ground planes: Unconnected islands can be omitted automatically 2006-09-28: 33.2.0.9: Added FABmaster as an output format 2006-09-26: 33.2.0.9: Component update via IBF online server now also adds components, that are newly declared as belonging to the standard library 2006-09-26: 33.2.0.9: Capability for AML (Active Multi Layer, Components inside the PCB) 2006-09-26: 33.2.0.9: "Component out of date" flag in library browser 2006-09-26: 33.2.0.9: Dialog "Signal wire": Focus to "Minimal width" or to "Width", instead of "Signal" (because of scroll wheel) 2006-09-26: 33.2.0.9: Blocked 0 (zero) as pin number in schematics 2006-09-19: 33.2.0.9: Copying modules / channels via clipboard: Improved assignment of packages to existing schematic symbols 2006-09-18: 33.2.0.9: XGerber import: Solved problem with missing CR/LFs 2006-09-08: 33.2.0.9: Pick&Place export and BOM now exactly have the same content for "package used" 2006-09-07: 33.2.0.9: Automatic exchange of prefixes during component import: e.g. IC=U; T=Q; K=JP 2006-08-28: 33.2.0.9: Elektra router: Signal dedicated layers can be ground plane layers or signal layers 2006-08-28: 33.2.0.9: PCB pool: Calculator uses different kind of HTTP and the SMTP server given in the registry is used 2006-08-28: 33.2.0.9: Library browser: Component renaming sometimes resulted in deletion of the component 2006-08-28: 33.2.0.9: Library browser: IEEE / DIN selectable 2006-08-25: 33.2.0.9: Variants: Several components can be assigned to different variants simultaneously 2006-08-23: 33.2.0.9: Move elements: Crosshair and phantom picture are always shown directly, not only after a mouse movement 2006-08-20: 33.2.0.9: Pick&Place export: Now centering marks (fiducials) can be exported too 2006-08-20: 33.2.0.9: Library browser: Property assistant: PROPOSED_PACKAGE_LIB and PROPOSED_PACKAGE are changeable now 2006-08-10: 33.2.0.9: Measuring: Added angle display to status line 2006-08-06: 33.2.0.9: Import of SMD components ot the solder side: Copper layer is not switched visible unintentionally 2006-07-25: 33.2.0.9: Introduced multi line text 2006-07-24: 33.2.0.9: Grid button in pad dialog also correctly works with relative coordinates 2006-07-24: 33.2.0.9: Proxy password is saved encrypted 2006-07-24: 33.2.0.9: XGerber import: Improved processing of metric XGerber data 2006-07-23: 33.2.0.9: Key [F2] for library browser also works in an empty TARGET main window, without a project opened 2006-07-21: 33.2.0.9: The teardrop funktion (teardrop shaped pads) does not cause airwires any more 2006-07-21: 33.2.0.9: Accelerated HTTP method "Sockets" 2006-07-20: 33.2.0.9: Selectable HTTP internet access method (Sockets - WinInet) 2006-07-20: 33.2.0.9: A package without Symbol can be assigned to a symbol without package retroactively 2006-07-19: 33.2.0.9: Menu "Help": Inserted dialog to report translation problems 2006-07-17: 33.2.0.9: XGerber import: Macros using variables now possible 2006-07-11: 33.2.0.9: Improved internet access (HttpOpenRequest) 2006-07-11: 33.2.0.9: Schematic: Try to keep component numbers (IC12, R37) when importing from clipboard 2006-07-10: 33.2.0.9: Put new Future Manager (Wish Manager) into operation 2006-07-04: 33.2.0.9: Range error in hybrid router lead to an access violation 2006-07-03: 33.2.0.9: Isolation milling: NCP: Height for tool change now 4 mm 2006-07-03: 33.2.0.9: Isolation milling: NCP: Movements outside the material now at height 2 mm 2006-07-03: 33.2.0.9: XGerber: New possibility for export of masses of triangles 2006-06-29: 33.2.0.9: Improved HTTP requests for proxy servers 2006-06-29: 33.2.0.9: Improved mouse wheel reaction 2006-06-29: 33.2.0.9: Import filter for netlists in Pads-Logic format (*.ASC) 2006-06-28: 33.2.0.9: Reo still united collinear track segments, even if they had different auras (s. 03.04.2006) 2006-06-26: 33.2.0.9: Put new fast Linux component server into operation 2006-06-09: 33.2.0.9: Inserted menu point "Mirror without flip" in menu "Edit" 2006-06-09: 33.2.0.9: The current working copper layer can optionally be displayed as topmost 2006-06-08: 33.2.0.9: Clipboard: TARGET assigns copies in layout view to former copies in schematic view 2006-06-05: 33.2.0.9: Saving of the buttons in layer toolbar can also work with serveral "copper inside" layers 2006-05-31: 33.2.0.9: Smallest aperture in PCBout now 0,025 mm instead of 0,05 mm (< 1 mil) 2006-05-31: 33.2.0.9: Create thermal pads: Sometimes some possible bridges were not created 2006-05-24: 33.2.0.9: Components with prefix SP caused problems when selecting connected signals 2006-05-18: 33.2.0.9: Relative coordinates also available in element dialogs 2006-05-17: 33.2.0.9: Function "Round corner" sometimes brought the wrong message "More than two lines!" 2006-05-12: 33.2.0.9: Isolation milling only bottom side: Mirroring is now vertical (using horizontal axis) 2006-05-11: 33.2.0.9: Added EasyPC as a Gerber import filter 2006-05-05: 33.2.0.9: Auto placer can also be restricted to the components of one schematic page 2006-05-04: 33.2.0.9: Selection Assistant: Errors ocurred because of the very long entries in property 3D-MODEL 2006-04-30: 33.2.0.9: Status line: Signal length of a selected signal: Only selected signal segments count (S=...) 2006-04-28: 33.2.0.9: XGerber import: Gerber lines only separated with '*' without CRLF also work by now 2006-04-27: 33.2.0.9: Block diagrams: New terminals can now be assigned to existing blocks 2006-04-27: 33.2.0.9: Accumulated bill of material (BOM) lists names of components in one cell 2006-04-25: 33.2.0.9: XGerber import: Support for "trailing zeroes omitted" 2006-04-24: 33.2.0.9: Library browser: Sorting of components in the libraries is really alpha-numerical now 2006-04-24: 33.2.0.9: Library browser: Windows focus is now directly on the selected component 2006-04-24: 33.2.0.9: Component export: Sometimes the dialog buttons did not behave correctly when overwriting existing components 2006-04-16: 33.2.0.9: Improved zooming out with the mouse wheel 2006-04-15: 33.2.0.9: Inserted menu point "Load bitmap into rectangle" into menü "Actions" 2006-04-15: 33.2.0.9: Extra colors for single elements have been disregarded if the element was highlighted 2006-04-15: 33.2.0.9: In spite of X-Ray view with [#], extreme short tracks were shown as filled circles 2006-04-15: 33.2.0.9: Added signal properties also to track dialog (min. width, min. spacing, color of airwires) 2006-04-03: 33.2.0.9: Reo united collinear track segments, even if they had different auras 2006-04-03: 33.2.0.9: Design rule check: Wrongly ground planes collided with bridges 2006-04-03: 33.2.0.9: Removed reorganisation dialog before design rule check 2006-03-22: 33.2.0.9: Interface to Electra2L router is now capable of 2 copper layers and an unlimited number of ground plane layers 2006-03-19: 33.2.0.9: PostScript: TrueType text was too wide in some cases 2006-03-16: 33.2.0.9: PCBout sometimes caused an accessviolation directly after pressing [Start] 2006-03-10: 33.2.0.9: Pick&Place: Remembers company entries and inserts the name of the variant used 2006-03-10: 33.2.0.9: Spice: Removed "INPgetTree" error in subcircuit generator 2006-03-10: 33.2.0.9: RoHS information in component properties 2006-03-03: 33.2.0.9: BOMs now available in CSV-Format (Bill Of Material, Comma Separated Value) 2006-03-01: 33.2.0.9: When importing symbols sometimes only packages were offered 2006-02-28: 33.2.0.9: Removed warning at program start concerning wrong windows font size 2006-02-16: 33.2.0.9: Improvement of the online library server regarding internet access via proxy 2006-02-13: 33.2.0.9: Zoom out with the mouse wheel does not skip around, if mouse moved meanwhile 2006-02-13: 33.2.0.9: Speed of zoom with the mouse wheel is adjustable (0=scroll instead of zoom, negative = reverse) 2006-02-13: 33.2.0.9: The small black selection boxes stayed visible though schematic page was toggled 2006-02-13: 33.2.0.9: Program help was not usable in some cases 2006-02-08: 33.2.0.9: The list of components for manually importing packages can now be sorted ascending or descending 2006-02-08: 33.2.0.9: Restricted the width of bridges of automatic thermal pads to 1/2 of the height or width of the pad 2006-02-08: 33.2.0.9: "Rest copper ring too thin" is now reported during check, even if the drill hole is bigger than the pad 2006-01-31: 33.2.0.9: When loading a package, missing layers are created 2006-01-26: 33.2.0.9: Eagle libraries can be output from library browser's context menu 2006-01-25: 33.2.0.9: Component export dialog also remembers the last recently used library 2006-01-19: 33.2.0.9: Vendor information also visible in symbol dialog 2006-01-19: 33.2.0.9: "Choose signal from bus" dialog increments signal names automatically: A0 -> A1 -> A2 ... 2006-01-19: 33.2.0.9: Cursor of "Choose signal from bus" dialog is on button [Ok] instead of [Bus assistant] 2006-01-13: 33.2.0.9: 3D models of mirrored components are shown correctly 2005-12-23: 33.2.0.9: Search and Replace a Kind of Package: 3D model was not replaced sometimes 2005-12-20: 33.2.0.9: Isolation milling: Outline milling does not lift the tool too often 2005-12-19: 33.2.0.9: Isolation milling: Fiducial drillings now possible even if exporting single sided data 2005-12-13: 33.2.0.9: LibBrowser: Deleting a component raised a wrong error message 2005-12-13: 33.2.0.9: Dialog "Settings and Options" with a new tree-view field for the selection of the library directory 2005-12-13: 33.2.0.9: Broadened "start assistant dialog", elongated "property dialog" 2005-12-09: 33.2.0.9: DRC: Error "Signal unfinished" now got coordinates 2005-12-09: 33.2.0.9: Isolation milling "CharlyRobot": Mirroring of "vopper bottom" sometimes did not work 2005-12-08: 33.2.0.9: During online program update the progressbar was not updated properly 2005-12-07: 33.2.0.9: PCB-Without-Schematic: Sometimes vias were not correctly transferred to the new signal when connecting 2005-12-06: 33.2.0.9: Isolation milling: It's possible now to mill holes inside the PCB and to cut the outline with a burin 2005-12-04: 33.2.0.9: Centering marks (fiducials) in schematic were deleted during reorganisation 2005-12-02: 33.2.0.9: Isolation milling sometimes milled all across the PCB, if the user chose "Drill at the end" 2005-11-30: 33.2.0.9: An access violation could occur after drill file export 2005-11-25: 33.2.0.9: Path for help files can now be edited in the hierarchy browser 2005-11-23: 33.2.0.9: The aura of pads now also depends on the drill hole if this is larger than the copper pad itself 2005-11-18: 33.2.0.9: Library browser sometimes used the wrong sheet on reopen 2005-11-17: 33.2.0.9: Improved installation and uninstall 2005-11-15: 33.2.0.9: Reload of component form: Often the settings of the pins were not replaced 2005-11-09: 33.2.0.9: Drills in padstacks are displayed dased if they do not touch a visible layer 2005-11-02: 33.2.0.9: Searching and zooming a big signal (e.g. GND) sometimes shrinked the view 2005-10-25: 33.2.0.9: Bill of material: Leading and trailing spaces are deleted with self defined properties 2005-10-24: 33.2.0.9: Modern, scalable dialogs for opening and saving files 2005-10-24: 33.2.0.9: Improved triangulation of polygons 2005-10-24: 33.2.0.9: Selection rectangles with context menu for dragging-deleting-inserting vertices in polygons 2005-10-20: 33.2.0.9: The help window stayed always on top 2005-10-20: 33.2.0.9: Sometimes static cross hairs remained if another window overlapped 2005-10-10: 33.2.0.9: Length of splines and tori is shown during creation and changing 2005-10-10: 33.2.0.9: Accelerated the start of TARGET, the updatemanager opens at the end of the program 2005-10-10: 33.2.0.9: Dispatch of first TARGET 3001! V12 2005-10-07: 33.2.0.9: Online access and update of libraries 2005-10-07: 33.2.0.9: Inserted 3D-View 2005-10-06: 33.2.0.9: Search and download of components from the IBF component server 2005-09-30: 33.2.0.9: Hybrid-Router: Fixed access violation with signals that only appeared in schematic 2005-09-19: 33.2.0.9: PostScript dialog: Settings are remembered as long as TARGET is running 2005-09-15: 33.2.0.9: Electra-Router: Planes with signals are regarded, e.g. ground planes 2005-09-12: 33.2.0.9: Electra-Router: Pre-routed vias are handed over with the correct size 2005-09-12: 33.2.0.9: Electra-Router: Corrected the regard of tori and splines within the PCB outline 2005-08-30: 33.2.0.9: Package dialog: Provided change of property "Rotation" with a warning hint 2005-08-26: 33.2.0.9: PCBout: Solved problem in ground planes with needle-sharp triangles 2005-08-23: 33.2.0.9: Added "Manual Placer" into menu "Actions" for linear, matrix-shaped and radial component arrangements 2005-08-21: 33.2.0.9: Under certain circumstances TARGET created very long tracks at random 2005-08-15: 33.2.0.9: Included HPGL.exe into TARGET 2005-08-13: 33.2.0.9: Included Post.exe into TARGET 2005-08-12: 33.2.0.9: Included DXF.exe into TARGET 2005-08-11: 33.2.0.9: Included GDS II into TARGET 2005-08-11: 33.2.0.9: Included Bohr.exe into TARGET 2005-08-11: 33.2.0.9: Included PCBout.exe into TARGET 2005-08-10: 33.2.0.9: Inserted point "Duplicate" into menu "Edit" 2005-08-10: 33.2.0.9: Devided menu "Input and output formats" 2005-08-09: 33.2.0.9: Isolation milling recognizes PCB type and remembers output format 2005-08-03: 33.2.0.9: Hierarchy browser: Context menu point "Show" gives no warning message any more 2005-07-29: 33.2.0.9: Electrical rule check ERC sometimes regarded those symbols of components that were not placed yet 2005-07-26: 33.2.0.9: Inserted new layer dialog 2005-07-21: 33.2.0.9: Isolations milling CharlyRobot: Before drilling now the desired immersion speed is set 2005-07-20: 33.2.0.9: Reorganisation: "Merge collinear signal segments" also regards busses 2005-07-18: 33.2.0.9: Isolation milling: New switch "Always select new tool for bottom side" 2005-07-11: 33.2.0.9: Package dialog: Provided change of property "Flipped" with a warning hint 2005-07-07: 33.2.0.9: Bill-Of-Material also exports variant properties of components 2005-07-05: 33.2.0.9: Electra-Router: No keepouts for pads 2005-07-05: 33.2.0.9: Pick&Place list also separated into SMD/THP or top/bottom 2005-07-05: 33.2.0.9: XP-Style GUI (luna) not only for window borders but also possible inside the dialogs 2005-06-30: 33.2.0.9: Create package: Two pads with the same pin number did not work properly 2005-06-30: 33.2.0.9: V11 stands still, changes and new features now for V12 2005-06-24: 33.2.0.9: Renaming a variant also renames the variant properties of components 2005-06-23: 33.2.0.9: Added Button [Variants] also in package dialog 2005-06-22: 33.2.0.9: "Check project" in certain cases did not recognize a spacing violation of a pad to a ground plane 2005-06-22: 33.2.0.9: PCBout.EXE: Holes in characters with TrueType font were displayed as filled by some CAMs 2005-06-22: 33.2.0.9: PCBout.EXE: Character width of TrueType fonts was ignored 2005-06-14: 33.2.0.9: Solder stop and solder paste now work in dialog "Via options" 2005-06-09: 33.2.0.9: Single track paths could not be copied via clipboard any more 2005-05-30: 33.2.0.9: Inserted menu point "Link to library" into library browser 2005-05-24: 33.2.0.9: DRC: Project name is used for the name of the check textfile: e.g. PIC.ERR3001 instead of TARGET.ERR3001 2005-05-24: 33.2.0.9: Inserted menu point "Select all" into menu "Edit" 2005-05-19: 33.2.0.9: Airwires of imported components are activated 2005-05-19: 33.2.0.9: Resetting elements to standard color sometimes didn't work 2005-05-19: 33.2.0.9: Programmed buttons in via dialog now also save solder stop and solder paste 2005-05-19: 33.2.0.9: Fixed again problems with length determination of text elements 2005-05-18: 33.2.0.9: Output *.dif for DigitalTest testers 2005-05-18: 33.2.0.9: Output *.tgr for Polar Instruments testers 2005-05-18: 33.2.0.9: External autorouter: Padstacks are processed too 2005-05-11: 33.2.0.9: Parts of single symbols and Packages can now be copied via clipboard 2005-05-04: 33.2.0.9: PCBout: Errormessage, if PCB outline not correct 2005-05-03: 33.2.0.9: Isolation milling: Under certain circumstances the first tool change was left out 2005-04-29: 33.2.0.9: XGerber import also reads lines that start with '*' 2005-04-27: 33.2.0.9: Isolation milling: Tracks that had no rounded ends were output too long 2005-04-27: 33.2.0.9: Improved check of pads that are not placed orthogonal (e.g. rotatiton by 45°) 2005-04-26: 33.2.0.9: Inserted Variants into Pick&Place dialog 2005-04-26: 33.2.0.9: When deleting track segments, the signal is selected for airwire showing 2005-04-26: 33.2.0.9: When loading a project, all airwires are selected for showing 2005-04-26: 33.2.0.9: Text in a copper layer is now correctly handed to the Elektra router 2005-04-26: 33.2.0.9: Self defined layer functions with endings "top" or "bottom" are now recognized as complementary 2005-04-14: 33.2.0.9: Under mysterious circumstances a symbol sometimes had more than one handle cross 2005-04-14: 33.2.0.9: Incrementing padnames now properly works in schematic too, not only in PCB mode 2005-04-12: 33.2.0.9: Airwires are not activated unintentionally 2005-04-12: 33.2.0.9: Coordinate output now uses the Windows decimal separator instead of always using "," 2005-04-12: 33.2.0.9: Coordinate output sometimes had too many decimals 2005-04-11: 33.2.0.9: IDF 3D: PCB outline was displayed incorrect sometimes 2005-04-11: 33.2.0.9: Symbol exchange: Message, if the two symbols are out of different components 2005-04-08: 33.2.0.9: Padnames are incremented during component creation, even if they have more than one character ABX9 -> ABX10 2005-04-06: 33.2.0.9: Fixed some problems with length determination of text elements 2005-04-06: 33.2.0.9: Bus dialog: New signal names may be entered again 2005-03-30: 33.2.0.9: Insertes help index into help menu 2005-03-30: 33.2.0.9: Isolation milling with HPGL uses differnt tools for isolation and PCB outline 2005-03-29: 33.2.0.9: Black background when printing without "sharp black/white" is printed 2005-03-25: 33.2.0.9: Added points "Insert page" and "Delete page" in menu "Actions" 2005-03-24: 33.2.0.9: DRC: Improved detection of "Pin not connected" 2005-03-21: 33.2.0.9: When splitting signals the smaller island directly gets an automatic name (e.g. Sig$31) 2005-03-21: 33.2.0.9: When connecting signals with automatic names (e.g. Sig$31) no more question "GND or Sig$31 ?" 2005-03-21: 33.2.0.9: Inserted warning, if DEFAULT.T3001 or DEFAULTP.T3001 are missing during creation of a new project 2005-03-10: 33.2.0.9: The recognition of the package pin grid in the library browser disregards mounting holes now 2005-03-08: 33.2.0.9: Panelisation: Sometimes TARGET also placed a copy of the PCB over the original 2005-02-24: 33.2.0.9: Pin and pad swap sometimes forgot to exchange given padnames in schematic too 2005-02-22: 33.2.0.9: Imporved handling of read-only project files 2005-02-22: 33.2.0.9: Import of Eagle libraries: improved error messages 2005-02-15: 33.2.0.9: Import XGerber & Excellon: Leading- / Trailing-Zerors sometimes were mixed up 2005-02-12: 33.2.0.9: Inserted volume discounts into WK-Mechanik Calkulator 2005-02-10: 33.2.0.9: DXF import also reads SOLIDs 2005-02-02: 33.2.0.9: Front panel calculation: Solved problem with rectangular breakouts 2005-02-02: 33.2.0.9: "Reload component" and "Reload properties" had problems with PROPOSED_PACKAGE 2005-01-26: 33.2.0.9: Isolation milling / CharlyRobot: Implemented command 17: Show message and wait for user action 2005-01-24: 33.2.0.9: Import XGerber and Excellon: Manual setting of the drill factor possible 2005-01-24: 33.2.0.9: Isolation engraving ISO/DIN: Coordinates are always in decimal now: 12.0 instead of 12 2005-01-24: 33.2.0.9: PCBout.exe: Error, if no drill hole was in the PCB 2005-01-14: 33.2.0.9: Pick&Place output prefers to use the property ORIGINAL_NAME instead of the component name 2005-01-14: 33.2.0.9: "Panelisation" creates the property ORIGINAL_NAME for copied components 2005-01-14: 33.2.0.9: [F12] created the airwires several times 2005-01-11: 33.2.0.9: Under certain circumstances the new check routines worked erroneously 2005-01-07: 33.2.0.9: The path for application data (AppDataPath) was not used correctly in some cases 2005-01-05: 33.2.0.9: Introduced "page name" as a text variable 2005-01-04: 33.2.0.9: On certain computers the hybrid autorouter could cause a blue-screen 2005-01-03: 33.2.0.9: Counting of pins/pads: Vias and reference pins do not count any more 2004-12-30: 33.2.0.9: Isolation milling: Sometimes immersion depth was wrong in DIN-ISO format output 2004-12-28: 33.2.0.9: Authentication with HTTP over a proxy sometimes failed 2004-12-17: 33.2.0.9: Isolation milling: Tori were ignored in PCB outline milling 2004-12-10: 33.2.0.9: Front panel calculator, kind of material was ignored 2004-12-08: 33.2.0.9: Sometimes different font types were missing in text dialogs 2004-12-07: 33.2.0.9: At times the error "NIL cannot be assigned to TStringList" appeared 2004-12-03: 33.2.0.9: In very special cases "pin swap" did not work 2004-11-26: 33.2.0.9: Round pads in isolation milling are no longer octagons but 16 sided polygons 2004-11-26: 33.2.0.9: Coordinates in mm were cut after the 3rd decimal digit 2004-11-20: 33.2.0.9: Snap-On-Pad only works with pads/tracks of the same signal 2004-11-18: 33.2.0.9: During blinking for [s], the key [backspace] led into an ugly system state 2004-11-17: 33.2.0.9: Itroduced unit nm 2004-11-05: 33.2.0.9: Introduced IDF 3D output 2004-11-05: 33.2.0.9: Introduced realtime DRC 2004-11-03: 33.2.0.9: Introduced special path for application settings files (AppDataPath) 2004-11-02: 33.2.0.9: Added WK front panel calculator 2004-11-02: 33.2.0.9: Added front panel designer 2004-11-02: 33.2.0.9: Added mounting drill holes as an own element 2004-10-22: 33.2.0.9: Limited buttons [:2] and [:5] in grid dialog to reasonable values 2004-10-18: 33.2.0.9: Added possibility to enter special characters 2004-10-18: 33.2.0.9: Introduced vector font "DIN_ISO_ANSI" 2004-10-10: 33.2.0.9: Backups and autosaves are stored into a subdirectory "BackupFiles" 2004-10-08: 33.2.0.9: "Search and replace comonent shape" could caused an error that prevented saving 2004-10-07: 33.2.0.9: Text with height and width up to 10cm possible 2004-09-24: 33.2.0.9: Inserted menue point "Dimension PCB" in menue "Actions" 2004-09-21: 33.2.0.9: "Import XGerber and Excellon" has now fields to enter OffsetX and OffsetY 2004-09-16: 33.2.0.9: Behr-Reo for composite signal names only for "number.number" i.e. "1.1","1.2".."2.1".. 2004-09-15: 33.2.0.9: Improved the computation of the enclosing rectangle of Windows fonts 2004-09-13: 33.2.0.9: Reorganisation of component numbers according to component position uses PCB or schematic 2004-09-13: 33.2.0.9: Component numbering uses gaps between existing components 2004-09-07: 33.2.0.9: Texts with a TrueType font can be mirrored 2004-09-06: 33.2.0.9: Added output for front panel milling to DXFout 2004-09-03: 33.2.0.9: PCBout: Polygons made of triangles sometimes caused problems 2004-08-30: 33.2.0.9: PCB outline wizard had problems with some break outs 2004-08-25: 33.2.0.9: PostScript: Instead of padnames always only pinnumbers were output 2004-08-25: 33.2.0.9: PCBout: Polygons as G36/G37 are no longer output as single triangles, but as seamless polygons 2004-08-25: 33.2.0.9: Isolation milling: Polygons made of triangles sometimes caused problems 2004-08-24: 33.2.0.9: Electrical rule check: Error "Output Error: Signal X" now with position marker 2004-08-24: 33.2.0.9: Electrical rule check: Error "Wrong REF Signal X" now with position marker 2004-08-24: 33.2.0.9: The bend mode for placing lines is saved in every window separately 2004-08-16: 33.2.0.9: Improved selection rectangles menu point "Segment into 45° grid" 2004-08-16: 33.2.0.9: Removed automatic adjustment during dragging of lines 2004-08-16: 33.2.0.9: Inserted "Linewidth" as entry down on the layer tool bar 2004-07-28: 33.2.0.9: "Centering holes only" in PostScript driver 2004-07-28: 33.2.0.9: Linewidth directly enterable below in layer toolbar 2004-07-26: 33.2.0.9: When loading a project, the components are directly adjusted to the current variant 2004-07-26: 33.2.0.9: Contour router ignored minimal width and spacing of signals (since 05.07.2004) 2004-07-19: 33.2.0.9: When using padstacks, some variant components were not shown dashed 2004-07-14: 33.2.0.9: Working with libraries sometimes caused problems or access violations since 29.06.2004 2004-07-14: 33.2.0.9: When drawing tracks, the length of the whole signal is shown in the status line (S=Xmil) 2004-07-12: 33.2.0.9: PCB layers with color "light gray" got "dark gray" when saving and reopening a project 2004-07-05: 33.2.0.9: Added "Minimum track width" and "Minimum track spacing" into dialog "Change Signal Wires" 2004-07-01: 33.2.0.9: Improved dialog "Connect signals" 2004-07-01: 33.2.0.9: Isolation milling: added output of text 2004-06-30: 33.2.0.9: Circles and tori were not seen correctly by the hybrid router 2004-06-29: 33.2.0.9: Package elements on layer 25 were always deleted during reorganisation 2004-06-29: 33.2.0.9: Accelerated creation of library index files 2004-06-29: 33.2.0.9: Accelerated export of components 2004-06-23: 33.2.0.9: Data sheet and price info in "change symbol dialog" 2004-06-17: 33.2.0.9: Sometimes texts were displayed in a wrong color 2004-06-17: 33.2.0.9: Check PCB: Renamed "Short-cut", "Wrong connection" and "Spacing violation" 2004-06-17: 33.2.0.9: Selection rectangles for tori allow to change a round bend back into a sharp bend 2004-06-16: 33.2.0.9: Apended interface to the high speed ELECTRA Shape Based Autorouter 2004-06-16: 33.2.0.9: Check project: Improved short-cut detection in schematic 2004-06-15: 33.2.0.9: Export to Eagle: Sometimes the message "Index exeeds maximum of list" appeared 2004-06-13: 33.2.0.9: Changing of component properties now also works for multiple components together 2004-06-13: 33.2.0.9: Selection assistant also selects symbols and packages according to component properties 2004-06-13: 33.2.0.9: [Enter]-key now works in property-dialog 2004-06-13: 33.2.0.9: Reference symbols are not saved in the list of the 20 most recently used components 2004-06-08: 33.2.0.9: Selection rectangles with context menu for dragging-deleting-inserting sharp bends and for rounding corners 2004-06-06: 33.2.0.9: Adjusted zoom factor for cross probe [F3] 2004-06-06: 33.2.0.9: Inserted point "Zoom selected" into menu "View" 2004-06-04: 33.2.0.9: Inserted hierarchy browser as a menu point too 2004-05-17: 33.2.0.9: New project windows are directly displayed maximized, if advertisings are disabled 2004-05-13: 33.2.0.9: Import package: Sorting by alphabet regards numbers correctly: R1,..R9,R10,R11.. and not R1,R10,R11,R2.. 2004-05-11: 33.2.0.9: The textbox in dialog "Help / Info" has now scrollbars 2004-05-11: 33.2.0.9: Texts in dialog "Help / Info" may now be loaded and saved extra 2004-05-10: 33.2.0.9: New project windows are directly maximized (in the non-demo-versions) 2004-05-03: 33.2.0.9: The menu entry "Edit Component Model" was sometimes missing in the library browser 2004-04-30: 33.2.0.9: "Rename PadStack" entered a wrong layer number 2004-04-29: 33.2.0.9: Multilayer: Improved output of PadStacks with PCBout 2004-04-29: 33.2.0.9: Multilayer: Change of layer with [.] or [:] now preferred uses the next to last used layer 2004-04-28: 33.2.0.9: Several output drivers did not recognize the text function !PROJECT 2004-04-28: 33.2.0.9: "Show signal" in hierarchybrowser sometimes changed the schematic page even if not necessary 2004-04-23: 33.2.0.9: Added isolation milling with CNC ISO 6983 or DIN 66025 2004-04-22: 33.2.0.9: Added possibility to enter Username and Password for Proxy 2004-04-22: 33.2.0.9: Inserted entry "Wheel mouse zoom reverted" 2004-04-22: 33.2.0.9: Removed a possible access-violation in hybrid router 2004-04-21: 33.2.0.9: Improved symbol assistant 2004-04-20: 33.2.0.9: Copying packages with the library browser damaged the destination librarie in some cases 2004-04-12: 33.2.0.9: The contents of the TARGET context menu changed 2004-04-12: 33.2.0.9: Right mouse click M2 creates the TARGET context menu instead of zooming in 2004-04-09: 33.2.0.9: Move/displace selected elements by a specified offset X/Y: [Shift]+[D] 2004-04-09: 33.2.0.9: TextIO also reads files with comma instead of colon as decimal separator 2004-04-08: 33.2.0.9: Grid dialog had problems with switching the unit more than once 2004-04-08: 33.2.0.9: Splines were forgotten sometimes during change of properties 2004-04-02: 33.2.0.9: Isolation milling: Double Pads were not isolated correctly in some cases 2004-04-01: 33.2.0.9: Isolation milling: Unconnected Pads were not isolated correctly in some cases 2004-04-01: 33.2.0.9: PCBout.EXE directly receives the filename of the current project 2004-03-31: 33.2.0.9: Loading of libraries and projects accelerated dramatically 2004-03-30: 33.2.0.9: Clipboard also copies drawings from schematic view to layout view and vice versa 2004-03-25: 33.2.0.9: Tori with a very small spanned angle were not displayed sometimes 2004-03-25: 33.2.0.9: Reorganisation puts signal segments together, if they lie in a line 2004-03-22: 33.2.0.9: HPGL.exe now also exports center coordinates of slices (for dispensing glue of SMD components) 2004-03-17: 33.2.0.9: Introduced new algortihm for isolation milling 2004-03-11: 33.2.0.9: Check schematic: "Island without REF" shows error coordinates now 2004-03-08: 33.2.0.9: Component import: Component names ending with blank did not work 2004-03-07: 33.2.0.9: Hybrid-Router used dispropotionately long time for certain problems 2004-03-05: 33.2.0.9: When working with cross-hair, often old cross-hairs remained and the screen had to be repainted 2004-03-04: 33.2.0.9: Bill-Of-Material: Ordering is now true alphanumeric: R1,R2,..R9,R10.. and not R1,R10,R2.. 2004-03-04: 33.2.0.9: Bill-Of-Material can be exported in Excel-Format *.xls (BIFF) too 2004-03-04: 33.2.0.9: Bill-Of-Material: Equal components can be summarized: 3 x 7400 etc. 2004-03-03: 33.2.0.9: Help did not start correctly in some cases 2004-03-01: 33.2.0.9: During movement of a component: Zooming works also with [pg up] and [pg dn] 2004-03-01: 33.2.0.9: Using mouse wheel inside a scrollbar rolls picture up/down or left/right 2004-03-01: 33.2.0.9: Using mouse wheel inside the window zooms the picture in or out 2004-02-27: 33.2.0.9: Level-selection for multiple models per component sometimes didn't select the right model 2004-02-26: 33.2.0.9: "flat" command within Eagle libraries caused problems 2004-02-18: 33.2.0.9: Start with Drag&Drop or double clock onto a *.T3001 file: 8.3 names (exampl~1.t30) are replaced correctly 2004-02-17: 33.2.0.9: PadStacks are allowed as pads in packages too; inside libraries the identical names of the padstacks are regarded 2004-02-16: 33.2.0.9: Libraries konverted from V9 showed file names for package libraries assigned which were wrong. (von V9 konvertierte Bibliotheken hatten z.T. einen falschen Dateinamen für die Gehäusebibliotheken) 2004-02-12: 33.2.0.9: Reo ignored the correction of ref texts when tightening artificial signal names (Reo vergaß beim Zusammenrücken von künstlichen Signalnamen auch die Ref-Beschriftungen mit zu ändern) 2004-02-11: 33.2.0.9: "Push onto Grid" now not only effects components anymore but also traces and vias highlighted("Aufs Raster schieben" bearbeitet nun nicht mehr nur die Bauteile sondern auch die markierten Bahnen und Dukos) 2004-02-10: 33.2.0.9: AutoPan starts not earlier as the mouse had been hovered once into the main screen (the image faded to the screens edge earlier)(AutoPan geht erst los, wenn die Maus mindestens einmal echt innerhalb des Fensters war (Bild "zappelte" sonst fort)) 2004-02-06: 33.2.0.9: List of the last 20 components can be faded.(Liste der 20 zuletzt benutzten Bauteile ist abschaltbar) 2004-02-06: 33.2.0.9: List of the last 20 components couldn't find components which had a blank in the name (Liste der 20 zuletzt benutzten Bauteile konnte Bauteil, die ein Leerzeichen im Namen hatten nicht finden) 2004-02-06: 33.2.0.9: Layer tool shows layer numbers and can be minimized (Ebenen-Werkzeugleiste zeigt EbenenNummern und läßt sich hochklappen) 2004-02-04: 33.2.0.9: Edition of project variables in the hirarchy browser: when intending to close project dialog "Save first?" was missing (Projekt-Variablen im Hierarchie-Browser ändern, dann Projekt schließen: Nachfrage "Speichern?" fehlte) 2004-02-03: 33.2.0.9: In Hybrid router sometimes texts in copper were missing (Im Hybrid-Router wurde u.U. Text im Kupfer nicht berücksichtigt 2004-02-03: 33.2.0.9: In library browser the package directly is displayed besides the symbol and also its grid width is shown (Im Bibliotheksbrowser wird das Gehäuse gleich mit angezeigt und das Rastermaß) 2004-02-03: 33.2.0.9: "pad free from solder paste" was sometimes intwrpreted false. "Pad-Frei-Von-Lötpaste" wurde u.U. falsch gespeichert 2004-01-30: 33.2.0.9: Update Manager sometimes intended to update files with the same version number (Update-Manager wollte u.U. Files mit gleicher Versionsnummer nochmal herunterladen) 2004-01-28: 33.2.0.9: The Hybrid router sometimes ignored via- and routing- prohibition zones (Im Hybrid-Router wurden u.U. die Via- und Route-Verbotszonen ignoriert) 2004-01-28: 33.2.0.9: In V11 smart the INFO-dialogue showed 1,000 pins instead of 700 (stand im Info-Dialog fälschlicherweise 1000 Pins statt 700) 2004-01-28: 33.2.0.9: The Help-file showed the wrong information that the panelization-function would exceed the pin limitation (In der Hilfe stand fälschlicherweise die Funktion "Nutzen setzen" könne die Pingrenze umgehen) 2004-01-26: 33.2.0.9: Modified the update manager, if PC is offline 2004-01-26: 33.2.0.9: Hybridrouter sometimes ignored the settings for minimum width and minimum spacing 2004-01-20: 33.2.0.9: PCBout.EXE was sometimes not exact in numbering the inner XGerber layers 2003-12-19: 33.2.0.9: Dispatch of V11 2003-12-19: 33.2.0.9: Solderstop and solderpaste to be set individually for each pad/via 2003-12-19: 33.2.0.9: Snap-on-pad extended to bendings and end of tracks 2003-12-19: 33.2.0.9: Generated version "smart" 2003-12-19: 33.2.0.9: Simulation counts signals instead of internal nodes 2003-12-19: 33.2.0.9: Inserted list of the 20 components most recently used 2003-12-19: 33.2.0.9: Dialog "Service approval criticism": contents are saved 2003-12-19: 33.2.0.9: PCB production inquiries included 2003-12-19: 33.2.0.9: Eagle-Export inserted 2003-12-19: 33.2.0.9: Start with check of date und time 2003-12-19: 33.2.0.9: Selection assistant inserted 2003-12-19: 33.2.0.9: Generation of Testing Points inserted 2003-12-19: 33.2.0.9: Panelisation inserted 2003-12-19: 33.2.0.9: New Hybrid router inserted in ultimate V10 2003-11-18: 33.2.0.9: Sometimes several polygones were highligted together just when intending to highlight only one 2003-10-29: 33.2.0.9: Binoculars and Design check: free rests of tracks led to signals "not ready" 2003-10-29: 33.2.0.9: Design check: air wires sometime were alerted to be non orthogonal 2003-10-27: 33.2.0.9: Design check: rectangular pads lacking an aura and placed within a ground plane had sometimes not been alerted 2003-10-22: 33.2.0.9: Library search for "Order numbers" was swapped to "Supplier" 2003-10-22: 33.2.0.9: DXF-Import: extreme coordinates cause warning messages 2003-10-13: 33.2.0.9: Package export: double pad numbers are connected as a bridge internally (like a zero Ohm resistor) 2003-10-13: 33.2.0.9: Wheel mouse scroll to be set in Hierarchy browser: Settings (Registry) 2003-10-13: 33.2.0.9: The settings in the PCB-Pool calculator are stored for the next time 2003-10-10: 33.2.0.9: Inserted buttons [x2] and [:2] in grid dialog 2003-10-06: 33.2.0.9: Under certain circumstances modification date and release date were mixed 2003-10-01: 33.2.0.9: Eagle library import: RECT command as well as rotation R0, R90, R180 and R270 established 2003-09-24: 33.2.0.9: Grid-unit unselected lead to NAN-Values for length entries in dialogs 2003-09-23: 33.2.0.9: Countour-Router: extremely wide tracks showed wide via holes but but narrow via copper 2003-09-20: 33.2.0.9: "Create Slider Track" worked properly only at the first insertion 2003-09-18: 33.2.0.9: Import of Eagle Libs: PAD-command now allows "Long" property 2003-09-15: 33.2.0.9: Dialog "Service, Approval and Criticism" now with a field for an individual SMTP-Server 2003-09-15: 33.2.0.9: Occasionally bus names were showed multiple, after a reorganization: $$BUS_1, $$BUS_2 ... 2003-08-29: 33.2.0.9: Very short aur wires are marked by a little cross 2003-08-25: 33.2.0.9: PostScript had problems in displaying schematic fit to DinA 4 esp. when having more than one Schematic page simultaneously. 2003-08-20: 33.2.0.9: XGerber-Import sometimes didn't read in it's own generated Excellon drill hole diameters correctly 2003-08-20: 33.2.0.9: XGerber-Import read only the first line 2003-07-08: 33.2.0.9: When showing spacing violations at big elements together with small elements the error mark was displayed closer to the smaller element 2003-07-07: 33.2.0.9: XGerber-Import now reads in the XGerber files generated by PCBout itself (incl. some AM = Aperture Macro) 2003-07-07: 33.2.0.9: Dialog "Grid": 0|0 of relative coordinates can be exactly placed on grid 2003-07-03: 33.2.0.9: Gerber Import for Tango also 2003-07-02: 33.2.0.9: "Check" groundplanes, which had been not made out of several rectangles and triangles, generated occasionally wrong warnings 2003-06-30: 33.2.0.9: "Shift Segment" displaced from time to time segments of the same signal upon different copper layer 2003-06-23: 33.2.0.9: "Rename Signal" selects the signal which is highlighted in schematic or layout 2003-06-23: 33.2.0.9: "Import XGerber" now is able to read in those elderly "single quadrant" curves 2003-06-20: 33.2.0.9: Print dialog warnes, when elements still are highlighted in the window. Color-irritations are avoided when printing colored 2003-05-21: 33.2.0.9: Dialogue: "Setting of the tool lifting" in NCP-isolation milling inserted 2003-04-28: 33.2.0.9: New modes of lines: running through, hatched, dotted, hatch-dot, hatch-dot-dot 2003-04-24: 33.2.0.9: Inserted a switch to dialog "Window/Settings/Options" for placement of two track segments at once 2003-04-24: 33.2.0.9: Schematic and PCB area enlarged to 1,2m to 1,2m. So DinA 0 possible 2003-04-22: 33.2.0.9: Insulation milling: Not connected pins are insulated also 2003-04-22: 33.2.0.9: Bug fixed when mirroring "copper bottom" on a single sided PCB 2003-04-02: 33.2.0.9: Change colors of elements: dialog for standard colors first 2003-04-02: 33.2.0.9: Insulation milling caused an error "index of list exceeds maximum" 2003-04-02: 33.2.0.9: Any cross of errors now show the number of the error 2003-03-19: 33.2.0.9: Place tracks: using [6] or [9] for placing a track it gets nestled to the left or to the right left 2003-03-17: 33.2.0.9: TextIO: Protel-Import improved: buses, spline curves 2003-03-17: 33.2.0.9: Concatenate a schematic to a "PCB without schematic" 2003-03-17: 33.2.0.9: Track segments hit by others somewhere in the middle get split. 2003-03-13: 33.2.0.9: Help: Online Service, approval, criticism: attached project files now zipped first. 2003-03-11: 33.2.0.9: Under special circumstances the use of buses could cause irritations in counting signals. 2003-03-05: 33.2.0.9: The new menu "Register TARGET file extensions..." caused occasionally an error. 2003-03-05: 33.2.0.9: Netlists can now be exported in CALAY- format. 2003-03-01: 33.2.0.9: on the layers toolbar now find three buttons for vias to be set in the via dialog on the right. 2003-03-01: 33.2.0.9: The generation of thermals not only for pads but also for vias. 2003-02-25: 33.2.0.9: In OrCad multiwire netlists now pad coordinates for needle tester can be transfered. 2003-02-20: 33.2.0.9: Toggle layers by pressing key [.] when placing the tracks now according to the PadStack chosen. 2003-02-17: 33.2.0.9: New function regarding sliding contacts in menu "Actions" in layout mode. 2003-02-17: 33.2.0.9: Dialog "Change Package": having highlighted several components prefix, number and value sometimes were egalized. 2003-02-13: 33.2.0.9: New function in Insulation milling: fiducial drills, double sided, insulating, RubOut. 2003-02-10: 33.2.0.9: PCBout: volume of data generated reduced. 2003-01-30: 33.2.0.9: Eagle Import: when importing only packages, pads numbers were missing. 2003-01-24: 33.2.0.9: PCBout ignored the drill layer under very special circumstances 2003-01-16: 33.2.0.9: Multiple 'inner copper layers' distinguished in package libraries 2002-12-20: 33.2.0.9: SnapOnPad: when manually routing on copper bottom, SnapOnPads-boxes were fixed to smd-pads on copper top also. 2002-12-16: 33.2.0.9: PCBout: under certain circumstances groundplanes were cut 2002-12-11: 33.2.0.9: PCBout: reduction of Ground plane tolerances 2002-12-10: 33.2.0.9: XGerber import: 360° circular interpolation possible (G75, G02, G03). 2002-12-09: 33.2.0.9: Insulation engraving in isel/ProMa NCP-format: last milling trace in a polygone sometimes too fast. 2002-12-09: 33.2.0.9: PCBout: redundant Gerber-aperture-files began sometimes with D0 instead of D10 2002-12-09: 33.2.0.9: PCB Outline Assistant: The assistant fixed outlines always to layer 23. 2002-12-06: 33.2.0.9: Colors-dialog: buttons Load and Save inserted to all colors. 2002-12-06: 33.2.0.9: Discs can be assigned to already existing signals (e.g. to circular ground planes). 2002-12-06: 33.2.0.9: Export all components to one library: some components occasionally appeared multiple. 2002-11-21: 33.2.0.9: Gate-/Symbol Swap now works in a schematic, having several pages. 2002-11-21: 33.2.0.9: Library scripts from EAGLE (*.scr) are now allowed to have points in the pin name 2002-11-20: 33.2.0.9: The computation of air wires didn' t recognize vias the right way (solved) 2002-11-19: 33.2.0.9: PCBout: rectangles and triangles as G36 Polygones hadn't always been completely closed (solved) 2002-11-06: 33.2.0.9: Replacement of components without connections (e.g. frames) caused an error (solved) 2002-11-05: 33.2.0.9: PostScript: Problems with soldering paste solved 2002-10-29: 33.2.0.9: Error message "Loss of data" if new projects had been edited with elderly versions of TARGET 3001! 2002-10-29: 33.2.0.9: TextIO had problems if properties were displayed which contained CR/LF 2002-10-29: 33.2.0.9: Chip designer: generating a new project, eg. with the TextIO, the grid in the layout is set to 400nm 2002-10-28: 33.2.0.9: Read in of Libraries caused an error, if CR/LF was part of component descriptions 2002-10-27: 33.2.0.9: A variant con be deducted from another 2002-10-26: 33.2.0.9: Number of possible variants of component insertion rises from 32 to 255 2002-10-26: 33.2.0.9: Air wires can not be highlighted inadvertently 2002-10-25: 33.2.0.9: Dialogue "Window/ Settings/Options": minimum spacing hasn't been saved correctly in the project file 2002-10-23: 33.2.0.9: Gerber-files import: editing afterwards has been optimized 2002-10-23: 33.2.0.9: XGerber Import acknowledges rectangular polygones as PCB tracks 2002-10-23: 33.2.0.9: Texts in Windows-fonts sometimes could not been coloured individually 2002-10-22: 33.2.0.9: Eagle.ulp: the Ascii-IO Import struggled with elements being drawn freehand in Eagle (R) 2002-10-19: 33.2.0.9: The triangulization struggled sometimes with complex polygones 2002-10-18: 33.2.0.9: PCBout: rectangles and triangles as G36 Polygones hadn't always been completely closed (solved) 2002-10-18: 33.2.0.9: Import Eagle library: "technology -" in *.scr file caused an error 2002-10-16: 33.2.0.9: Under seldom ocurring circumstances new signal names could be given wrongly 2002-10-11: 33.2.0.9: Black and White print had problems sometimes with individually coloured elements 2002-10-08: 33.2.0.9: Swap Symbols caused an access violation sometimes when activating Reorganization (solved) 2002-10-06: 33.2.0.9: Lib-Browser: Components Read New with button [u] (below right) 2002-10-04: 33.2.0.9: PCBout: rectangles and triangles as G36 Polygones hadn't always been completely closed (solved) 2002-10-04: 33.2.0.9: Sitgnal tori in schematic hadn't been displayed in signal colour (solved ) 2002-10-04: 33.2.0.9: Pin-names sometimes couldn't be deleted 2002-09-27: 33.2.0.9: Thermal-Pads function inserted in menu Actions 2002-09-24: 33.2.0.9: Polygones can be generated using key [5] (mit Taste [5] erzeugbar) 2002-09-23: 33.2.0.9: Generation and updating of a wire list in harness layout (Automotive) 2002-09-22: 33.2.0.9: Generation and updating of Harness Layouts (Automotive) 2002-09-20: 33.2.0.9: Loading of "Individual Text Functions" out of V9 files mixed up sometimes. 2002-09-19: 33.2.0.9: Measurements in [m] established 2002-09-19: 33.2.0.9: "Compare Libraries" didn't find libraries sometimes (solved) 2002-09-19: 33.2.0.9: Though advertisings had been switched off, the link was activated when clicking on the bachground. 2002-09-16: 33.2.0.9: save all packages of one project in one library: symbols instead of packages had been saved (solved) 2002-09-11: 33.2.0.9: Isel-Insulaion engraving: extra speed for diving the tool into the into the workpiece can be set 2002-09-10: 33.2.0.9: Solder paste: only SMD-Pads without drilling are exposed 2002-09-10: 33.2.0.9: XGerber-Import reads normal polygones with G36/G37 2002-09-06: 33.2.0.9: Eagle-Script-Import: Grid-command realized more exactly 2002-09-05: 33.2.0.9: DXF-In is able to handle comments out of the first section 2002-08-27: 33.2.0.9: Chip designer: setting of the track options always is taken to the standard settings 2002-08-27: 33.2.0.9: When placing tracks only one segment is placed first 2002-08-22: 33.2.0.9: Text function "page number" showed sometimes (solved) 2002-08-22: 33.2.0.9: Sometimes PCBout did not notice additional deletion layers (solved 2002-08-22: 33.2.0.9: When dragging and moving the "phantom image of the cursor sometimes didn't show the auro resp. the minimum spacing correctly (solved) 2002-08-21: 33.2.0.9: When saving the buttons of the layers tool bar colors and patterns are saved also 2002-08-20: 33.2.0.9: Check project sometimes showed spacing violations which were no 2002-08-20: 33.2.0.9: In PCB-view the key [#] toggles to "Draw outlines of packages only (quick drawing)" 2002-08-20: 33.2.0.9: Duko options can be reached in the track buttons by a button 2002-08-20: 33.2.0.9: Lib browser: a change of the package proposals properties remained unsuccessful sometimes (solved) 2002-08-20: 33.2.0.9: In the layers toolbar buttos inserted: all, for show all layers, "none" for showing none and button "#" for drawing outlines only 2002-08-14: 33.2.0.9: New Component assistant and and Package assistant released. 2002-08-13: 33.2.0.9: Check Project showed error warnings regards cell overlappings which were no 2002-08-13: 33.2.0.9: Cell generator and UnCastor work with leaning rectangles and with text in the right header 2002-08-13: 33.2.0.9: A change of component value at an already generated cell leads always to its deletion 2002-08-07: 33.2.0.9: Exposure of minimum spacing when routing by hand considers the current aura as well 2002-08-07: 33.2.0.9: 12 Buttons in "Track Options" can save project settings in the project and in an extra file (*.TRK) 2002-08-06: 33.2.0.9: Overlapping of packages at times generated a wrong erroe warning "package corrupt" 2002-08-06: 33.2.0.9: Cell generator and UnCastor now copy resp. shift triangles, tori and splines 2002-08-06: 33.2.0.9: model generator does not insert additional artificial nodes into a model 2002-08-06: 33.2.0.9: Exposure of minimum spacing when routing by hand more clearly 2002-08-04: 33.2.0.9: Preview images inserted to the new symbol and package assistant. 2002-08-02: 33.2.0.9: "Check Project": tracks on layer 100 caused an "Out-Of-Range" Error 2002-07-31: 33.2.0.9: ISEL NCP Engraving Insulation Channels: an initial "wrong" error warning deleted 2002-07-24: 33.2.0.9: TARGET 3001! starts correctly under MS Win NT 4.0 2002-07-19: 33.2.0.9: In dialog "Change Pads" the property "layer" had been hooked always to be changed 2002-05-31: 33.2.0.9: PCBout.exe: problem solved regarding tori thinner than smallest aperture set 2002-05-28: 33.2.0.9: Reading library info also recognizes link files *.SYM3001LNK 2002-05-27: 33.2.0.9: Lots of tokens in component- and symbol propertiies egalized 2002-05-27: 33.2.0.9: Adjustment of the library formats in German version BTL3001 -> SYM3001; GHS3001 -> PCK3001 2002-05-06: 33.2.0.9: XGerber Import established 2002-05-06: 33.2.0.9: ISEL .ncp format for isolation milling establshed 2002-05-06: 33.2.0.9: Calculation- and ordering module for PCB-Pool (R) established 2002-05-06: 33.2.0.9: Import Component: deactivating warning " A not activated window cannot obtain the focus" 2002-05-06: 33.2.0.9: Further Win XP icons inserted 2002-05-02: 33.2.0.9: New Win XP icons in tool bars 2002-05-02: 33.2.0.9: Background colors for schematic and PCB-layout independent from the 16 TARGET colors 2002-05-02: 33.2.0.9: Highlighting with a special color (e.g. yellow) works in schematic mode also 2002-05-02: 33.2.0.9: Status line: M1 on coordinates -> absolute, on scale -> draw new, else ->un-highlight 2002-03-23: 33.2.0.9: DXF-In is able to read text files with only LFs besides those with CRs and CRLFs 2002-03-21: 33.2.0.9: PCB without Schematic: sometimes pins had not been connected correctly after using "undo" 2002-03-02: 33.2.0.9: Overlapping-check ignored whether several lines of the same sub-cell are locatet at the same place 2002-02-13: 33.2.0.9: DXF is able to convert POLYLINE also 2002-02-11: 33.2.0.9: Changing of minimum width and minimum spacing was not effecting directly from time to time 2002-02-07: 33.2.0.9: Direct import of DXF 2002-02-06: 33.2.0.9: Frequency of restoring the status line when using DRC optimized 2002-02-05: 33.2.0.9: Project names as text function (without extension .3001) 2002-01-20: 33.2.0.9: Dispatch of TARGET 3001! V10! 2001-11-28: 33.2.0.9: Variants also for components with different values and ordering numbers etc. 2001-11-28: 33.2.0.9: Page number as text function usable 2001-11-11: 33.2.0.9: Centering marks had hatched outlines in the screen view 2001-11-11: 33.2.0.9: Ground plane assistant caused an error message when stated without giving a signal name 2001-11-08: 33.2.0.9: Possibility to import Gerber from FabFactory 2001-11-03: 33.2.0.9: New opportunity for conversion of Eagle(R) library scripts to TARGET 3001 libraries 2001-10-25: 33.2.0.9: The DRC function caused an accessviolation in certain cases 2001-10-25: 33.2.0.9: The size of the error marks can be set before the DRC 2001-10-24: 33.2.0.9: BEHR job: Output directly for CATIA E3D (IBM) 2001-10-17: 33.2.0.9: The TIFF export in B/W created completely black TIFFs sometimes 2001-10-01: 33.2.0.9: TOYOTA job: Construction of looms on the layout side of TARGET 2001-10-01: 33.2.0.9: TOYOTA job: Concatenation of plugs and form parts 2001-09-07: 33.2.0.9: "Find and Select" was zooming, even if "Zoom in Elements" had been unchecked 2001-09-05: 33.2.0.9: Export PROTEL netlists 2001-09-04: 33.2.0.9: The square meter is indicated as a gray dashed line 2001-09-04: 33.2.0.9: The absolute zero point is indicated as a gray dashed cross 2001-09-04: 33.2.0.9: A relative zero point is indicated as a small gray dashed cross 2001-09-04: 33.2.0.9: Statusline shows dX, dY and L when drawing lines 2001-09-04: 33.2.0.9: Statusline shows dX and dY when creating rectangles 2001-09-04: 33.2.0.9: Statusline shows R when creating circles 2001-09-03: 33.2.0.9: The TIFF-Export in B/W is compressed now and creates very small TIFFs 2001-08-08: 33.2.0.9: Deletion sometimes caused ugly rests remaining on the screen 2001-08-06: 33.2.0.9: Undo also restores the properties of components and signals 2001-08-03: 33.2.0.9: Pick-And-Place and Bill-Of-Material had Problems with components without pads 2001-07-30: 33.2.0.9: DRC and Uncastor report, if an incompatible cell was assigned to a component 2001-07-19: 33.2.0.9: Export sometimes made the wrong error message that some elements were left and not exported 2001-07-15: 33.2.0.9: DRC checks ground planes too 2001-06-21: 33.2.0.9: Signal names that are attached to a signal with [n] are moving smartly even when dragging the signal 2001-06-17: 33.2.0.9: Repeated menu item "Window/Settings" in menu "File" 2001-06-15: 33.2.0.9: Printing: Variant components can be omitted: Possibility to print all drill holes as centering holes only (0,6 mm) 2001-06-15: 33.2.0.9: Alphanumerical pad names are possible by now 2001-06-14: 33.2.0.9: Chip: Possibility to enter a subdirectory when generating cells 2001-06-13: 33.2.0.9: In very special cases the DRC did not find a spacing violation between a track and a 2001-06-12: 33.2.0.9: Compionets, that are not on the current page, were not zoomed in 2001-06-12: 33.2.0.9: Prefixes of components sometimes could not be renamed 2001-06-12: 33.2.0.9: For dual-screen-systems the TARGET dialogs can be set into the right or into the left 2001-06-12: 33.2.0.9: Extra colors for every element can overwrite the predefined layer or schematic 2001-06-12: 33.2.0.9: The selections in the "Check Project" dialog are stored in the project now 2001-06-08: 33.2.0.9: TARGET registers the Extensions *.T3, *.T2001, *.T3001, *.T3001A, *.T3001B, *.T3001C and *. BK1 ... *.BK9 2001-06-01: 33.2.0.9: If opening a file without write permission (e.g. on a CD), the file is seen as unsaved 2001-05-30: 33.2.0.9: Sometimes certain airwires were not displayed 2001-05-28: 33.2.0.9: M11 into a block of a blockdiagram, directly leads to the corresponding schematic page 2001-05-23: 33.2.0.9: Texts can get properties, which may contain commands for mouse click M11 2001-05-23: 33.2.0.9: Introduced command WinExec19.05.03: Property="EXECUTE" Value="WINEXE C:\TEST.EXE" Executes program "Test" 2001-05-23: 33.2.0.9: Introduced command Page: Property="EXECUTE" Value="PAGE: 5" opens schematic page No 5 2001-05-21: 33.2.0.9: DRC in chip designer registers, if a cell was torn 2001-05-21: 33.2.0.9: UnCastor registers, if a cell was torn 2001-05-21: 33.2.0.9: DRC can select certain layers for the spacing check 2001-05-08: 33.2.0.9: Netlists can also be read into PCBs 2001-05-08: 33.2.0.9: Mentor netlists can be read 2001-03-27: 33.2.0.9: Lib browser: After editing a component, the window is closed and the browser is started again 2001-03-27: 33.2.0.9: When editing and exporting a package, the old package properties are remembered 2001-03-26: 33.2.0.9: The export of Packages sometimes caused an access violation 2001-03-21: 33.2.0.9: eBeam output probably had a memory leak 2001-03-20: 33.2.0.9: Tool list can be integrated into the drill file (SM1000 oder CNC 7) 2001-03-16: 33.2.0.9: Loops in PCB signals sometimes caused error messages 2001-03-16: 33.2.0.9: of component numbers sometimes caused error messages or double component names 2001-03-14: 33.2.0.9: Merge circuit to a single cell: Only component values are kept up: 2001-03-14: 33.2.0.9: Bill-of-material got an additional header 2001-03-14: 33.2.0.9: Printing: Variant components can be omitted 2001-03-08: 33.2.0.9: The library browser shows the pin functions using signs and colors 2001-03-05: 33.2.0.9: First english translation of V9 1013-02-25: 33.2.0.9: CXF import: Solved problems with package names 1013-02-04: 33.2.0.9: Program start without network but SQLite path non-local caused a hang-up 1012-11-22: 33.2.0.9: Menu Actions: Teardrops can be removed again